SEARCH NOW FOR ALL YOUR ALECO SOLUTIONS
Radwell is here to supply you with all your plant floor needs.
Radwell is not an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.
Filter Results
APEX TOOLS
CLECO
TVP-110-15-U-D
DISCONTINUED BY MANUFACTERER, PNEUMATIC QUALIFIER, 110-230 VAC, 50/60HZ, SINGLE PHASE, W/ INTERFACE AND KEYPAD
£2,155.68
Price with VAT:
£2,586.82
APEX TOOLS
CLECO
MPRO400GC-M
DISCONTINUED BY MANUFACTURER, CONTROLLER, MASTER, 18-48 AIRLB,115-230 VAC, 50/60 HZ, 2 AMP, 250 VA POWER RATING, IP52, CONTROLS UP TO 16 TOOLS, CORDLESS, BTS SERIES
£4,155.80
Price with VAT:
£4,986.96
APEX TOOLS
CLECO
TME-111-15-U-EN
DISCONTINUED BY MANUFACTURER, CHANNEL TIGHTENING MANAGER CONTROLLER, 115V, 50/60HZ, 1PH, 15AMP
£698.72
Price with VAT:
£838.46
APEX TOOLS
CLECO
TME-211-30-D-GM03
DISCONTINUED BY MANUFACTURER, SAFETY CONTROLLER, TIGHTENING MANAGER, TM200 SERIES, 1 PHASE, 10 AMP, 230 VAC, 50/60 HZ
£1,789.00
Price with VAT:
£2,146.79
APEX TOOLS
CLECO
35RNL10K-3
DISCONTINUED ITEM, CLECO 3/8" ANGLE NUTRUNNER 10-19 FT LBS. | 710 RPM
£1,777.88
Price with VAT:
£2,133.46
APEX TOOLS
CLECO
5RS A-10B
DISCONTINUED BY MANUFACTURER, PNUMATIC SCREWDRIVER
£934.01
Price with VAT:
£1,120.81
APEX TOOLS
CLECO
CLBA083
CELLCLUTCH 18 VOLT 3/8" ERGONOMIC CORDLESS NUTRUNNER 92-915 RPM, LITHIUM-ION BATTERY NOT INCLUDED (MOQ=1, PKG QTY=1)
£837.83
Price with VAT:
£1,005.39
APEX TOOLS
CLECO
12L1081-36
AIR DIE GRINDER: 1/4'' COLLET, 1/4'' INLET 34,000 RPM, 0.3 HP, 16 CFM, REAR EXHAUST (MOQ=1, PKG QTY=1)
£300.76
Price with VAT:
£360.91
APEX TOOLS
CLECO
WP-2049-6
IMPACT WRENCH, WP SERIES, BIASED, REVERSE POWER, 125-550 FT LB, 170-750 NM, 6000 RPM, 1000 IPM, 3/4 INCH SQUARE DRIVE, 6.4 INCH LENGTH, 1.6 INCH SIDE TO CENTER
£1,088.93
Price with VAT:
£1,306.72
APEX TOOLS
CLECO
41R032M
MOTOR, ROTARY VANE, 1 HP, SE, REV, 320 RPM, 63 FT LBS., 5/8" KEYED SPINDLE
£2,497.19
Price with VAT:
£2,996.62
APEX TOOLS
CLECO
18EAE28AM3
ELECTRIC NUTRUNNER, 18 SERIES, RIGHT ANGLE, CORDED, 3/8 SQUARE DRIVE, 4.43/20.7 FT/LB TORQUE RANGE (MIN/MAX), 700 R/MIN
£9,835.00
Price with VAT:
£11,801.99
APEX TOOLS
CLECO
544055-10M
DISCONTINUED BY MANUFACTURER, CABLE, 18/48E SERIES, ANGLE SWIVEL TYPE, BAJONETT CABLE, FOR DC NUTSETTER
£326.69
Price with VAT:
£392.02
APEX TOOLS
CLECO
18ESE17D3
DISCONTINUED BY MANUFACTURER, TRANSDUCER CONTROL, INLINE CORDED, ELECTRIC NUTRUNNER, TORQUE RANGE MIN/MAX FT/LB: 2.95/12.5, 18 SERIES
£4,489.16
Price with VAT:
£5,386.99
APEX TOOLS
CLECO
301903-10M
CABLE ASSEMBLY, TOOL CABLE, SWIVEL ANGLE, 10 METER LENGTH
£2,889.06
Price with VAT:
£3,466.87
APEX TOOLS
CLECO
839335
HAMMER & CHIPPER REPLACEMENT CHISEL: COLD, 1-3/4" HEAD WIDTH, 18" OAL, 1/2" SHANK DIA, (MOQ=1, PKG QTY=1)
£64.45
Price with VAT:
£77.34
APEX TOOLS
CLECO
CLBA303
CELLCLUTCH 18 VOLT 3/8" ERGONOMIC CORDLESS NUTRUNNER 26-255 RPM, LITHIUM-ION BATTERY NOT INCLUDED (MOQ=1, PKG QTY=1)
£1,144.51
Price with VAT:
£1,373.42
APEX TOOLS
CLECO
55RNL-7T-4
1/2" DRIVE, 490 RPM, 41 FT/LB TORQUE, NUT RUNNER 1/2 NPT INLET, 55 CFM (MOQ=1, PKG QTY=1)
£2,464.59
Price with VAT:
£2,957.51
APEX TOOLS
CLECO
TVP-100-30-D
CLECO, TVP-100-30-D, TVP10030D, TORQUE VERIFIER, 115/230VAC, 50/60HZ, 1AMP, 1PHASE
£1,570.46
Price with VAT:
£1,884.56
APEX TOOLS
CLECO
935391
CLECO, 935391, CHARGER FOR 26V LI-ION BATTERY, 110-240VAC, 50/60HZ
£26.67
Price with VAT:
£32.00
Repair Yours
Contact Us
APEX TOOLS
CLECO
34RAA68AZ4
PNEUMATIC NUTRUNNER, 34 SERIES, 1/2IN SQUAR DRIVE, 25-50LB TORQUE RANGE, 255RPM, 3/8IN AIR INLET, (473-34RAA68AZ4)
£3,092.04
Price with VAT:
£3,710.44
APEX TOOLS
CLECO
543025
DISC BACKING PAD: ADHESIVE & PSA 5/16-24 THREAD, 13,000 MAX RPM (MOQ=1, PKG QTY=1)
£22.12
Price with VAT:
£26.54
APEX TOOLS
CLECO
LB810
CRESCENT LAMINATE BOX JOINT PLIERS SET, 6SETS/BOX, LAMINATE BOX JOINT PLIERS SET, 6SETS/BOX HAND TOOLS UNSPSC=27112100 UPC=37103142795
£14.82
Price with VAT:
£17.78
APEX TOOLS
CLECO
TME-111-15-U-ED
CHANNEL TIGHTENING MANAGER CONTROLLER, 115V, 50/60HZ, 1PH, 15AMP
£1,060.04
Price with VAT:
£1,272.05
APEX TOOLS
CLECO
TMEM-114-15-U-IO
DISCONTINUED BY MANUFACTURER, CONTROLLER TIGHTENING MANAGER, 16 AMP, 115 VAC, 50/60 HZ, 1 PHASE
£1,919.29
Price with VAT:
£2,303.15
APEX TOOLS
CLECO
55RNL-2T-4
REVERSE ANGLE NUTRUNNER, 55 SERIES, LEVER START, 145 RPM, 130 FT-LBS, 1/2 INCH
£1,896.77
Price with VAT:
£2,276.12
APEX TOOLS
CLECO
MPRO400GC-I
DISCONTINUED BY MANUFACTURER, CONTROL, TRANSDUCER CURRENT CONTROL, 115/230 VAC, 50/60 HZ, 2 AMP, 250 VA
£889.09
Price with VAT:
£1,066.91
APEX TOOLS
CLECO
18CSE06Q
DISCONTINUED BY MANUFACTURER, TRANSDUCER CONTROL, 1.5-4.4 FT-LBS, 2-6 NM, 4000 RPM, 1/4 IN HEX OUTPUT DRIVE SIZE
£889.09
Price with VAT:
£1,066.91
APEX TOOLS
CLECO
TME-111-15-U-DC01
CONTROL, 115VAC, 15A, 50/60HZ, 1PH
£2,332.31
Price with VAT:
£2,798.77
APEX TOOLS
CLECO
TMEB-220-30-D
SAFETY CONTROLLER, 30A, 1PH, 230VAC, 50/60HZ
£5,113.27
Price with VAT:
£6,135.92
APEX TOOLS
CLECO
48CSE36D3
DISCONTINUED BY MANUFACTURER, TRANSDUCER CONTROL, 5.9-26.6 FT-LBS, 8-36 NM, 1290 RPM, 3/8 IN OUTPUT DRIVE SIZE
£889.09
Price with VAT:
£1,066.91
APEX TOOLS
CLECO
TME-221-30-D
SAFTEY CONTROLLER, 10AMP, 1PH, 230VAC, 50/60HZ
£5,113.27
Price with VAT:
£6,135.92
APEX TOOLS
CLECO
EMT600-2R6-1"-APM
DISCONTINUED BY MANUFACTURER, DC ELECTRIC ASSEMBLY TOOL
£2,685.33
Price with VAT:
£3,222.39
APEX TOOLS
CLECO
MR10R097M
DISCONTINUED BY MANUFACTURER, ROTARY VANE MOTOR, MR10 SERIES, FOOT MOUNTING, 5/8” (NON-GEARED) OR 7/8” (GEARED) DIAMETER KEYED SPINDLE, 1 HP
£1,795.97
Price with VAT:
£2,155.16
