Product Search

    SEARCH NOW FOR ALL YOUR ALECO SOLUTIONS

    Radwell is here to supply you with all your plant floor needs.

    Radwell is not an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.

    Rockwell Disclaimer: The product is used surplus. Radwell is not an authorised surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorised dealers. Because Radwell is not an authorised distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Radwell makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Radwell also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Radwell also makes no representations as to your right to install any such firmware on the product. Radwell will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

    Filter Results
    Results 1-50 of 271.
    ALLEN BRADLEY JYKG76-01MC-V3

    ALLEN BRADLEY

    VEECO

    JYKG76-01MC-V3

    DISCONTINUED BY MANUFACTURER, SHORT CIRCUIT SYSTEM UNIT, INPUT: 10.5 AMP 1 PHASE 230 VAC 60 HZ, OUTPUT: 10.5 AMP 230 VAC, 200.000 RMS, 200 KA
    Buy Surplus As Low As £4,957.67 Price with VAT: £5,949.20
    £4,957.67 Price with VAT: £5,949.20
    Repair Yours £3,188.81 Price with VAT: £3,826.57
    APEX TOOLS 5RNAL-254BH-3

    APEX TOOLS

    CLECO

    5RNAL-254BH-3

    NUTRUNNER / ANGLE, CLECOMATIC CLUTCH, 5 SERIES, LEVER START, TWIST RING REVERSE, 1/4 INCH BOLT SIZE, 500 RPM FREE SPEED, 75-10 IN LB, 8.5-1.1 NM, 13.9 INCH LENGTH, 1.2 INCH HEAD HEIGHT, 0.5 ...
    ✓ IN STOCK!
    £2,776.30 Price with VAT: £3,331.56 Buy Surplus As Low As £1,370.70 Price with VAT: £1,644.84
    £1,370.70 Price with VAT: £1,644.84
    Repair Yours £1,264.09 Price with VAT: £1,516.91
    APEX TOOLS TME-211-15-U

    APEX TOOLS

    CLECO

    TME-211-15-U

    DISCONTINUED BY MANUFACTURER, TIGHTENING MANAGER CONTROLLER, 2 CHANNEL, 115 VAC, 1 PHASE, 15 AMP, 50/60 HZ, ETHERNET, 16.5 INCH WIDTH, 17.5 INCH HEIGHT, 12.3 INCH DEPTH
    ✓ IN STOCK!
    Buy Surplus As Low As £2,802.55 Price with VAT: £3,363.06
    £2,802.55 Price with VAT: £3,363.06
    Repair Yours £2,584.57 Price with VAT: £3,101.48
    APEX TOOLS 47EA43AM3

    APEX TOOLS

    CLECO

    47EA43AM3

    DISCONTINUED BY MANUFACTURER, NUTRUNNER / RIGHT ANGLE, 47EA SERIES, 3/8 INCH BOLT SIZE, DC BRUSHLESS, LEVER START, MAX TORQUE 43 NM, 685 RPM FREE SPEED, 31.7-6.6 FT LB, 43-9 NM, 17.7 INCH LE ...
    ✓ IN STOCK!
    Buy Surplus As Low As £804.71 Price with VAT: £965.65
    £804.71 Price with VAT: £965.65
    Repair Yours £667.91 Price with VAT: £801.49
    APEX TOOLS 832100

    APEX TOOLS

    CLECO

    832100

    DISCONTINUED BY MANUFACTURER, VALVE THROTTLE, 3/4IN LGT, 3/8IN DIA
    ✓ IN STOCK!
    Buy Surplus As Low As £0.62 Price with VAT: £0.75
    £0.62 Price with VAT: £0.75
    APEX TOOLS 832077

    APEX TOOLS

    CLECO

    832077

    SPRING FOR THROTTLE VALVE
    ✓ IN STOCK!
    £0.70 Price with VAT: £0.85 Buy Surplus As Low As £0.33 Price with VAT: £0.40
    £0.33 Price with VAT: £0.40
    APEX TOOLS 14E1SA02Q

    APEX TOOLS

    CLECO

    14E1SA02Q

    SCREWDRIVER, 14 SERIES, INLINE, REVERSIBLE, QUICK CHANGE, PUSH-TO-START, #6 SCREW SIZE, 1900 RPM FREE SPEED, 16-3 IN LB, 1.8-0.4 NM, 12.9 INCH LENGTH, 110 V
    ✓ IN STOCK!
    £774.03 Price with VAT: £928.83 Buy Surplus As Low As £343.93 Price with VAT: £412.72
    £343.93 Price with VAT: £412.72
    Repair Yours £285.47 Price with VAT: £342.56
    APEX TOOLS 834111

    APEX TOOLS

    CLECO

    834111

    PIN 4INCH
    ✓ IN STOCK!
    £6.44 Price with VAT: £7.72 Buy Surplus As Low As £3.04 Price with VAT: £3.65
    £3.04 Price with VAT: £3.65
    APEX TOOLS 5RSAUPT-10BQ

    APEX TOOLS

    CLECO

    5RSAUPT-10BQ

    SCREW DRIVER, PISTOL GRIP, 5 SERIES, PUSH AND TRIGGER START, SLIDING KNOB REVERSE, TOP AIR INLET, #10 SCREW SIZE, 1100 RPM FREE SPEED, 40-3 IN LB, 4.5-.4 NM, 8.4 INCH LENGTH
    ✓ IN STOCK!
    £1,302.41 Price with VAT: £1,562.89 Buy Surplus As Low As £578.72 Price with VAT: £694.46
    £578.72 Price with VAT: £694.46
    Repair Yours £480.34 Price with VAT: £576.41
    APEX TOOLS 5RSSTP-10BQ

    APEX TOOLS

    CLECO

    5RSSTP-10BQ

    SCREWDRIVER, 5 SERIES, PISTOL GRIP, SLIDING KNOB REVERSE, 1/4 INCH HEX QUICK CHANGE, #10 SCREW SIZE, 1100 RPM FREE SPEED, 40 IN LB, 4.5 NM, 6.4 INCH LENGTH
    ✓ IN STOCK!
    £1,052.12 Price with VAT: £1,262.55 Buy Surplus As Low As £592.18 Price with VAT: £710.61
    £592.18 Price with VAT: £710.61
    Repair Yours £479.05 Price with VAT: £574.86
    APEX TOOLS 24RAA19AM3

    APEX TOOLS

    CLECO

    24RAA19AM3

    NUTRUNNER / ANGLE, SERIES 24, CLUTCH SHUT OFF, LEVER START, COLLAR REVERSE, 7.0-14.0 TORQUE RANGE, 700 -1/MIN FREE SPEED, 3/8 INCH SQUARE DRIVE OUTPUT, 15 INCH LENGTH, 0.52 INCH SIDE TO CENT ...
    ✓ IN STOCK!
    £4,739.46 Price with VAT: £5,687.35 Buy Surplus As Low As £1,919.68 Price with VAT: £2,303.62
    £1,919.68 Price with VAT: £2,303.62
    Repair Yours £1,593.34 Price with VAT: £1,912.00
    APEX TOOLS 202632

    APEX TOOLS

    CLECO

    202632

    MUFFLER
    ✓ IN STOCK!
    £4.37 Price with VAT: £5.24 Buy Surplus As Low As £2.54 Price with VAT: £3.05
    £2.54 Price with VAT: £3.05
    APEX TOOLS 34RAA37AX3

    APEX TOOLS

    CLECO

    34RAA37AX3

    ANGLE NUT RUNNER
    ✓ IN STOCK!
    £4,125.06 Price with VAT: £4,950.07 Buy Surplus As Low As £1,790.77 Price with VAT: £2,148.93
    £1,790.77 Price with VAT: £2,148.93
    APEX TOOLS 864236

    APEX TOOLS

    CLECO

    864236

    AIR TOOL CYLINDER
    ✓ IN STOCK!
    £176.73 Price with VAT: £212.08 Buy Surplus As Low As £85.03 Price with VAT: £102.04
    £85.03 Price with VAT: £102.04
    APEX TOOLS 34RAA47AX3

    APEX TOOLS

    CLECO

    34RAA47AX3

    PNEUMATIC NUTRUNNER, SERIES 34
    ✓ IN STOCK!
    £3,655.26 Price with VAT: £4,386.32 Buy Surplus As Low As £1,974.24 Price with VAT: £2,369.09
    £1,974.24 Price with VAT: £2,369.09
    Repair Yours £1,820.69 Price with VAT: £2,184.83
    APEX TOOLS 35STHF404

    APEX TOOLS

    CLECO

    35STHF404

    PULSE NUTSETTER, INCLINE PULSE SHUT-OFF, NUTSETTER, AVAILABLE, SURPLUS, NEVER USED, 2 YEAR RADWELL WARRANTY
    ✓ IN STOCK!
    £2,106.93 Price with VAT: £2,528.32 Buy Surplus As Low As £815.15 Price with VAT: £978.18
    £815.15 Price with VAT: £978.18
    Repair Yours £736.12 Price with VAT: £883.35
    APEX TOOLS 18ES31D3

    APEX TOOLS

    CLECO

    18ES31D3

    DISCONTINUED BY MANUFACTURER, CLECO 18ES31D3 NUTRUNNER, 695 RPM, TORQ 31.8
    ✓ IN STOCK!
    Buy Surplus As Low As £3,036.09 Price with VAT: £3,643.30
    £3,036.09 Price with VAT: £3,643.30
    APEX TOOLS 17EP06Q

    APEX TOOLS

    CLECO

    17EP06Q

    NUTRUNNER, 17EP SERIES, PISTOL GRIP, 2600 RPM FREE SPEED, 4.4-1.5 FT LB, 6-2 NM, #10 BOLT SIZE, 7 INCH LENGTH, 0.84 INCH SIDE TO CENTER
    ✓ IN STOCK!
    £5,960.47 Price with VAT: £7,152.57 Buy Surplus As Low As £3,354.76 Price with VAT: £4,025.71
    £3,354.76 Price with VAT: £4,025.71
    Repair Yours £2,713.89 Price with VAT: £3,256.67
    APEX TOOLS WP-2049-6

    APEX TOOLS

    CLECO

    WP-2049-6

    IMPACT WRENCH, WP SERIES, BIASED, REVERSE POWER, 125-550 FT LB, 170-750 NM, 6000 RPM, 1000 IPM, 3/4 INCH SQUARE DRIVE, 6.4 INCH LENGTH, 1.6 INCH SIDE TO CENTER
    ✓ IN STOCK!
    £2,424.05 Price with VAT: £2,908.86 Buy Surplus As Low As £1,288.54 Price with VAT: £1,546.25
    £1,288.54 Price with VAT: £1,546.25
    Repair Yours £904.78 Price with VAT: £1,085.74
    APEX TOOLS TME-121-15-U

    APEX TOOLS

    CLECO

    TME-121-15-U

    DISCONTINUED BY MANUFACTURER, TIGHTENING MANAGER CONTROLLER, 2-CHANNEL, 15AMP, 115VAC, 50/60HZ, 1PH
    ✓ IN STOCK!
    Buy Surplus As Low As £700.63 Price with VAT: £840.76
    £700.63 Price with VAT: £840.76
    APEX TOOLS 542778-3M

    APEX TOOLS

    CLECO

    542778-3M

    DISCONTINUED BY MANUFACTURER, CABLE, 3M, FOR ELECTRONICALLY CONTROLLED CROWFOOT NUTRUNNER
    ✓ IN STOCK!
    Buy Surplus As Low As £525.63 Price with VAT: £630.76
    £525.63 Price with VAT: £630.76
    APEX TOOLS 203473

    APEX TOOLS

    CLECO

    203473

    BACKHEAD ASSEMBLY
    ✓ IN STOCK!
    Buy Surplus As Low As £24.09 Price with VAT: £28.90
    £24.09 Price with VAT: £28.90
    APEX TOOLS 1906PT

    APEX TOOLS

    CLECO

    1906PT

    ROTOR BLADE:
    ✓ IN STOCK!
    £9.31 Price with VAT: £11.17 Buy Surplus As Low As £6.94 Price with VAT: £8.33
    £6.94 Price with VAT: £8.33
    APEX TOOLS 935377

    APEX TOOLS

    CLECO

    935377

    DISCONTINUED BY MANUFACTURER, BATTERY, 26V
    ✓ IN STOCK!
    Buy Surplus As Low As £201.75 Price with VAT: £242.10
    £201.75 Price with VAT: £242.10
    APEX TOOLS 861496

    APEX TOOLS

    CLECO

    861496

    NUTRUNNER RIGHT ANGLE HEAD T-4 1/2INCH
    ✓ IN STOCK!
    Buy Surplus As Low As £594.08 Price with VAT: £712.90
    £594.08 Price with VAT: £712.90
    Repair Yours £443.78 Price with VAT: £532.53
    APEX TOOLS MPRO300GCD

    APEX TOOLS

    CLECO

    MPRO300GCD

    DISCONTINUED BY MANUFACTURER, NUTRUNNER CONTROLLER, 18/48 AIRLB, CONTROLS UP TO 16 TOOL, 50/60 HZ, 2A, 100/240 VAC, IP42, 1600 VA
    ✓ IN STOCK!
    Buy Surplus As Low As £2,892.17 Price with VAT: £3,470.61
    £2,892.17 Price with VAT: £3,470.61
    APEX TOOLS 48EAE41AM3

    APEX TOOLS

    CLECO

    48EAE41AM3

    ELECTRIC NUTRUNNER, 48 SERIES, RIGHT ANGLE, TRANSDUCER CONTROL, 41NM, 6.6-30.3FT/LB TORQUE, 17.3IN LENGTH, 1090RPM
    ✓ IN STOCK!
    £17,534.73 Price with VAT: £21,041.68 Buy Surplus As Low As £8,521.88 Price with VAT: £10,226.25
    £8,521.88 Price with VAT: £10,226.25
    Repair Yours £7,073.16 Price with VAT: £8,487.79
    APEX TOOLS 203109

    APEX TOOLS

    CLECO

    203109

    MUFFLER
    ✓ IN STOCK!
    £6.56 Price with VAT: £7.87 Buy Surplus As Low As £3.82 Price with VAT: £4.58
    £3.82 Price with VAT: £4.58
    APEX TOOLS 18EAE15AM3

    APEX TOOLS

    CLECO

    18EAE15AM3

    NUTRUNNER, SERIES 18, RIGHT ANGLE, CORDED ELECTRIC TRANSDUCER CONTROL, TORQUE RANGE 2.95-11.1 FT LBS / 4-15 NM
    ✓ IN STOCK!
    £6,668.51 Price with VAT: £8,002.21 Buy Surplus As Low As £3,115.85 Price with VAT: £3,739.02
    £3,115.85 Price with VAT: £3,739.02
    Repair Yours £2,586.16 Price with VAT: £3,103.39
    APEX TOOLS TME-111-15-U-EN

    APEX TOOLS

    CLECO

    TME-111-15-U-EN

    DISCONTINUED BY MANUFACTURER, CHANNEL TIGHTENING MANAGER CONTROLLER, 115V, 50/60HZ, 1PH, 15AMP
    ✓ IN STOCK!
    Buy Surplus As Low As £959.48 Price with VAT: £1,151.38
    £959.48 Price with VAT: £1,151.38
    Repair Yours £884.86 Price with VAT: £1,061.83
    APEX TOOLS 47EA60AM4

    APEX TOOLS

    CLECO

    47EA60AM4

    DISCONTINUED BY MANUFACTURER, NUTRUNNER, 47EA SERIES, CORDED, 485 RPM, 61 NM MAX TORQUE, RIGHT ANGLE, ELECTRIC TRANSDUCER CONTROL
    ✓ IN STOCK!
    Buy Surplus As Low As £1,985.14 Price with VAT: £2,382.16
    £1,985.14 Price with VAT: £2,382.16
    APEX TOOLS A9D6432

    APEX TOOLS

    CLECO

    A9D6432

    ROD PUSH ASSEMBLY
    ✓ IN STOCK!
    £145.23 Price with VAT: £174.28 Buy Surplus As Low As £69.88 Price with VAT: £83.86
    £69.88 Price with VAT: £83.86
    APEX TOOLS 847302

    APEX TOOLS

    CLECO

    847302

    INLINE SCREWDRIVER FINDER BIT NOSE
    ✓ IN STOCK!
    £25.63 Price with VAT: £30.75 Buy Surplus As Low As £11.21 Price with VAT: £13.45
    £11.21 Price with VAT: £13.45
    APEX TOOLS 15STHF30Q

    APEX TOOLS

    CLECO

    15STHF30Q

    PULSE NUTSETTER/ SCREWDRIVER
    ✓ IN STOCK!
    Buy Surplus As Low As £827.14 Price with VAT: £992.57
    £827.14 Price with VAT: £992.57
    Repair Yours £807.68 Price with VAT: £969.22
    APEX TOOLS MPRO400GC-P

    APEX TOOLS

    CLECO

    MPRO400GC-P

    DISCONTINUED BY MANUFACTURER, NUTRUNNER CONTROLLER, 18/48 AIRLB, CONTROLS UP TO 16 TOOL, 50/60 HZ, 2A, 115/230 VAC
    ✓ IN STOCK!
    Buy Surplus As Low As £2,228.73 Price with VAT: £2,674.48
    £2,228.73 Price with VAT: £2,674.48
    Repair Yours £1,849.85 Price with VAT: £2,219.82
    APEX TOOLS TVP-110-15-U

    APEX TOOLS

    CLECO

    TVP-110-15-U

    DISCONTINUED BY MANUFACTERER, PNEUMATIC QUALIFIER, 110-230 VAC, 50/60HZ, SINGLE PHASE, W/ INTERFACE AND KEYPAD
    ✓ IN STOCK!
    Buy Surplus As Low As £2,198.52 Price with VAT: £2,638.22
    £2,198.52 Price with VAT: £2,638.22
    Repair Yours £1,386.45 Price with VAT: £1,663.74
    APEX TOOLS TME-111-30-D

    APEX TOOLS

    CLECO

    TME-111-30-D

    TIGHTENING MANAGER 10AMPS 230V
    ✓ IN STOCK!
    £6,666.54 Price with VAT: £7,999.85 Buy Surplus As Low As £3,078.40 Price with VAT: £3,694.08
    £3,078.40 Price with VAT: £3,694.08
    Repair Yours £2,838.97 Price with VAT: £3,406.76
    APEX TOOLS TME-111-15-U

    APEX TOOLS

    CLECO

    TME-111-15-U

    DISCONTINUED BY MANUFACTURER,CONTROLLER AIR FOR ELECTRIC TOOL, 115 VAC, 50/60 HZ, 1 PHASE, 15 AMP, CLECO
    ✓ IN STOCK!
    Buy Surplus As Low As £2,883.13 Price with VAT: £3,459.76
    £2,883.13 Price with VAT: £3,459.76
    Repair Yours £2,041.17 Price with VAT: £2,449.40
    APEX TOOLS 47BAXB15AM3

    APEX TOOLS

    CLECO

    47BAXB15AM3

    DISCONTINUED BY MANUFACTURER, EC TOOL, 47 SERIES, CORDLESS, BATTERY POWER, RIGHT-ANGLE, WLAN: 2.4 GHZ, BATTERY: 48 V MAX., 15 NM, ATTACHMENT: SQUARE 3/8", LOCKING: PIN
    ✓ IN STOCK!
    Buy Surplus As Low As £678.97 Price with VAT: £814.76
    £678.97 Price with VAT: £814.76
    APEX TOOLS 24RAS13AM3

    APEX TOOLS

    CLECO

    24RAS13AM3

    DISCONTINUED BY MANUFACTURER, NUTRUNNER / ANGLE, SERIES 24, CLUTCH SHUT OFF, LEVER START, COLLAR REVERSE, 7.0-14.0 TORQUE RANGE, 700 -1/MIN FREE SPEED, 3/8 INCH SQUARE DRIVE
    ✓ IN STOCK!
    Buy Surplus As Low As £2,343.60 Price with VAT: £2,812.32
    £2,343.60 Price with VAT: £2,812.32
    Repair Yours £2,042.45 Price with VAT: £2,450.94
    APEX TOOLS TME-111-15-U-DC01

    APEX TOOLS

    CLECO

    TME-111-15-U-DC01

    CONTROL, 115VAC, 15A, 50/60HZ, 1PH
    ✓ IN STOCK!
    £4,798.98 Price with VAT: £5,758.78 Buy Surplus As Low As £2,332.31 Price with VAT: £2,798.77
    £2,332.31 Price with VAT: £2,798.77
    Repair Yours £2,032.61 Price with VAT: £2,439.13
    APEX TOOLS 236GLF-250-C4

    APEX TOOLS

    CLECO

    236GLF-250-C4

    INLINE GRINDER FE
    £936.62 Price with VAT: £1,123.94 Buy Surplus As Low As £562.12 Price with VAT: £674.54
    £562.12 Price with VAT: £674.54
    APEX TOOLS 4RSA17

    APEX TOOLS

    CLECO

    4RSA17

    SCREW GUN 1/4IN 4/19 TORQUE 1600RPM
    Buy Surplus As Low As £889.90 Price with VAT: £1,067.88
    £889.90 Price with VAT: £1,067.88
    Repair Yours £741.58 Price with VAT: £889.90
    APEX TOOLS 543025

    APEX TOOLS

    CLECO

    543025

    DISC BACKING PAD: ADHESIVE & PSA 5/16-24 THREAD, 13,000 MAX RPM (MOQ=1, PKG QTY=1)
    £46.72 Price with VAT: £56.06 Buy Surplus As Low As £28.18 Price with VAT: £33.82
    £28.18 Price with VAT: £33.82
    APEX TOOLS BL-4A

    APEX TOOLS

    CLECO

    BL-4A

    BALANCER 2-4LBS
    £113.85 Price with VAT: £136.62 Buy Surplus As Low As £68.91 Price with VAT: £82.69
    £68.91 Price with VAT: £82.69
    APEX TOOLS 8RSA-10BQ

    APEX TOOLS

    CLECO

    8RSA-10BQ

    1/4" BIT HOLDER, 800 RPM, INLINE HANDLE AIR SCREWDRIVER 15 TO 65 IN/LB TORQUE, 19 CFM
    £2,293.20 Price with VAT: £2,751.84 Buy Surplus As Low As £1,375.92 Price with VAT: £1,651.10
    £1,375.92 Price with VAT: £1,651.10
    APEX TOOLS 9336CMG

    APEX TOOLS

    CLECO

    9336CMG

    DWOS 6" PROSERIES DGNL CUTTING- GEN. PURPOSE SLD
    £22.25 Price with VAT: £26.70 Buy Surplus As Low As £14.09 Price with VAT: £16.91
    £14.09 Price with VAT: £16.91
    APEX TOOLS B4R318M

    APEX TOOLS

    CLECO

    B4R318M

    AXIAL PISTON REAR EXHAUST REVERSIBLE PNEUMATIC AIR MOTOR, 0.9 HP POWER RATING, 525 RPM SPEED, 40 FT-LB TORQUE, 39.9 SCFM AIR FLOW
    £7,014.63 Price with VAT: £8,417.56 Buy Surplus As Low As £4,209.23 Price with VAT: £5,051.07
    £4,209.23 Price with VAT: £5,051.07
    Repair Yours £2,217.33 Price with VAT: £2,660.80
    APEX TOOLS 70528100

    APEX TOOLS

    CLECO

    70528100

    TRIGGER KIT, MASTER POWER, FOR MP2465 SCREWDRIVER
    £128.29 Price with VAT: £153.95 Buy Surplus As Low As £77.12 Price with VAT: £92.55
    £77.12 Price with VAT: £92.55
    APEX TOOLS 4060AVL-07

    APEX TOOLS

    CLECO

    4060AVL-07

    4HP VERT GRD 6K RPM 7IN GD
    £1,487.62 Price with VAT: £1,785.14 Buy Surplus As Low As £892.87 Price with VAT: £1,071.44
    £892.87 Price with VAT: £1,071.44
    Next
    1 2 3 4 5 6