SEARCH NOW FOR ALL YOUR CONEC SOLUTIONS
Radwell is here to supply you with all your plant floor needs.
Radwell is an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.
Filter Results
NIDEC CORP
CONTROL TECHNIQUES
UT01
DISCONTINUED BY MANUFACTURER, CONVERTER MODULE, 15-WAY, D-TYPE
✓ IN STOCK!
£21.10
Price with VAT:
£25.32
NIDEC CORP
CONTROL TECHNIQUES
3251-0060-00
CAPACITOR BANK FAN
✓ IN STOCK!
£154.59
Price with VAT:
£185.51
NIDEC CORP
CONTROL TECHNIQUES
1220-0030040
DISCONTINUED BY MANUFACTURER, DYNAMIC BRAKE RESISTOR, 1900 W RATED POWER (UL), 3000 W RATED POWER (CE), 800 V MAX. WORKING VOLTAGE, 57 AMP MAX. CURRENT, 3800 V DIELECTRIC STRENGTH, GALVANIZE ...
✓ IN STOCK!
£223.00
Price with VAT:
£267.60
NIDEC CORP
CONTROL TECHNIQUES
9200-2755
PCB, DRIVE CONTROLLER BOARD, REVISION 7.
✓ IN STOCK!
£382.95
Price with VAT:
£459.54
NIDEC CORP
CONTROL TECHNIQUES
MGE-208-CONS-0001
SERVO MOTOR, MG FAMILY, ENGLISH MOUNTING FLANGE, 2" FRAME, 8 LB.-IN. CONT. TORQUE, 2.3/7.8 AMPS (CONT./PEAK), 5000 RPM, MS CONNECTOR, W/O BRAKE, ENCODER FEEDBACK TYPE, STANDARD SHAFT SEAL, S ...
✓ IN STOCK!
£1,030.47
Price with VAT:
£1,236.57
NIDEC CORP
CONTROL TECHNIQUES
FX-6310
DISCONTINUED BY MANUFACTURER, SERVO DRIVE, FX SERIES, 460 VAC, 30 AMP, AKA:960206-01
✓ IN STOCK!
£3,966.52
Price with VAT:
£4,759.82
NIDEC CORP
CONTROL TECHNIQUES
DXE-455CB
DISCONTINUED BY MANUFACTURER, SERVO MOTOR, LINE REACTOR, LOW IMPEDANCE, NEMA1, 3000RPM, 850AMP, 230VAC, 55 LB-INCH TORQUE, 4INCH FRAME, ENGLISH MOUNT, BRAKE MOTOR/24VDC
✓ IN STOCK!
£1,723.28
Price with VAT:
£2,067.93
NIDEC CORP
CONTROL TECHNIQUES
960169-02
SERVO CONTROLLER AXIMA 0200
✓ IN STOCK!
£953.21
Price with VAT:
£1,143.85
NIDEC CORP
CONTROL TECHNIQUES
3470-0002-03
DISCONTINUED BY MANUFACTURER, PARTS KIT, FOR SERVO DRIVE, CONNECTORS, GROUNDING CLAMP AND BRACKET, 4X TERMINAL COVER GROMMETS, 3X M6 WASHERS, IP54 GASKET, THROUGH PANEL MOUNTING BRACKET AND ...
✓ IN STOCK!
£52.12
Price with VAT:
£62.55
NIDEC CORP
CONTROL TECHNIQUES
NTR-PWR-M12-A-10
(PRICE/10 FT) POWER CABLE, STRAIGHT M12 A-CODED FEMALE CONNECTOR TO BARE END, SHIELDED , PWR-M12-A-10 , PWR-M12-A-10
£54.36
Price with VAT:
£65.23
NIDEC CORP
CONTROL TECHNIQUES
2200-4070
DISCONTINUED BY MANUFACTURER, CONTROLLER BOARD, REF/FDBK
✓ IN STOCK!
£211.92
Price with VAT:
£254.30
NIDEC CORP
CONTROL TECHNIQUES
DXA-780
DISCONTINUED BY MANUFACTURER, SERVO DRIVE, POSITIONING, 120 VAC, 50/60 HZ INPUT, SHUNT FUSE, BRIDGE FUSE
✓ IN STOCK!
£2,195.47
Price with VAT:
£2,634.56
NIDEC CORP
CONTROL TECHNIQUES
142U3E405JARAA165240
DISCONTINUED BY MANUFACTURER, SERVO MOTOR, 5.86 KW, 4000/5170 RPM, 23.8 AMP, 6 POLE, 380/480 V, 24 V BRAKE, 14-25 NM
✓ IN STOCK!
£1,588.69
Price with VAT:
£1,906.43
NIDEC CORP
CONTROL TECHNIQUES
STDT27
DISCONTINUED BY MANUFACTURER, SM-APPLICATIONS
✓ IN STOCK!
£106.10
Price with VAT:
£127.32
NIDEC CORP
CONTROL TECHNIQUES
CDE75HPICD
DISCONTINUED BY MANUFACTURER, DRIVE, COMMANDER CDE, 75 HP, INPUT / 93 AMP / 3 PHASE / 380/480 VAC / 50/60 HZ, OVERLOAD / 150 % FOR 60 SECONDS
✓ IN STOCK!
£3,573.74
Price with VAT:
£4,288.49
NIDEC CORP
CONTROL TECHNIQUES
HDV110E150H30350JE1
DISCONTINUED BY MANUFACTURER, SERVO MOTOR, 1.5 KW, 3000 RPM, 6 AMP, 220 V, 5 NM
✓ IN STOCK!
£955.94
Price with VAT:
£1,147.13
NIDEC CORP
CONTROL TECHNIQUES
089UDC400BAAEA
SERVO MOTOR, UNIMOTOR HD, BRUSHLESS, HIGH DYNAMIC AC, 4000 RPM, 400 V, 089 FRAME, RESOLVER, NOT FITTED BRAKE, FULL KEY FITTED TO SHAFT, PTC THERMISTOR, POWER / SIGNAL 180 DEGREE ROTATABLE CO ...
✓ IN STOCK!
£1,056.86
Price with VAT:
£1,268.23
NIDEC CORP
CONTROL TECHNIQUES
067UDB306BAARA
SERVO MOTOR, UNIMOTOR HD, BRUSHLESS, HIGH DYNAMIC AC, 3000 RPM, 400 V, 067 FRAME, RESOLVER, PARKING BRAKE, FULL KEY FITTED TO SHAFT, PTC THERMISTOR, POWER / SIGNAL 180 DEGREE ROTATABLE CONNE ...
✓ IN STOCK!
£990.66
Price with VAT:
£1,188.80
NIDEC CORP
CONTROL TECHNIQUES
75UMC600CACAA
DISCONTINUED BY MANUFACTURER, AC SERVO MOTOR, BRUSHLESS, FRAME SIZE 75, FOR UNIDRIVE, 6000 RPM, INCREMENTAL ENCODER 4096 C/T FEEDBACK, IEC FLANGE MOUNTING, 2048 PPR, 6 POLE
✓ IN STOCK!
£1,687.60
Price with VAT:
£2,025.12
NIDEC CORP
CONTROL TECHNIQUES
MV61-012003AA2
DISCONTINUED BY MANUFACTURER, SERVO DRIVE, DIGITAX SF II MV SERIES, INTELLIGENT, ANALOG / PULSE TRAIN, 3 AMP, 3 PHASE, 220 V, COMMUNICATION ENCODER
✓ IN STOCK!
£1,225.56
Price with VAT:
£1,470.67
NIDEC CORP
CONTROL TECHNIQUES
STDX51
DISCONTINUED BY MANUFACTURER, SM-APPLICATIONS
✓ IN STOCK!
£59.00
Price with VAT:
£70.80
NIDEC CORP
CONTROL TECHNIQUES
MGE-490-CONS-000R
DISCONTINUED BY MANUFACTURER, SERVO MOTOR, MG FAMILY, ENGLISH MOUNTING FLANGE, 4" FRAME, 100 LB.-IN. CONT. TORQUE, 10.3/45 AMPS (CONT./PEAK), 3000 RPM, MS CONNECTOR, W/O BRAKE, ENCODER FEEDB ...
✓ IN STOCK!
£2,054.90
Price with VAT:
£2,465.88
NIDEC CORP
CONTROL TECHNIQUES
DXE-208C-R
DISCONTINUED BY MANUFACTURER, UNIMOTOR SERVO MOTOR, 460 VAC, 115 MM FRAME, 58.4 LB-IN CONT. STALL TORQUE, 3000 RPM MAX SPEED, INCREMENTAL ENCODER, 24 VDC BRAKE
✓ IN STOCK!
£502.13
Price with VAT:
£602.56
NIDEC CORP
CONTROL TECHNIQUES
075U2A301CACAA075110
DISCONTINUED BY MANUFACTURER, SERVO MOTOR, UNIMOTOR FM, 75 MM FRAME SIZE, 400 VAC, 50/60 HZ, STANDARD PEAK TORQUE, A TYPE FRAME, 1.2 NM, 3000 RPM, 24 VDC PARK BRAKE, ROTATABLE POWER+SIGNAL C ...
✓ IN STOCK!
£384.77
Price with VAT:
£461.72
NIDEC CORP
CONTROL TECHNIQUES
IN31-ISS-1A
DISCONTINUED BY MANUFACTURER, PC BOARD, CT CONTROL BOARD
✓ IN STOCK!
£966.02
Price with VAT:
£1,159.22
NIDEC CORP
CONTROL TECHNIQUES
850025-01
DISCONTINUED BY MANUFACTURER, SERVO DRIVE, POSITIONING, 3 PHASE, 196-264VAC 50/60HZ, 10KHZ SWITCHING FREQUENCY, 30AMP BUS FUSE, 10AMP SHUNT FUSE, DX-8300, DXA-8300
✓ IN STOCK!
£2,716.04
Price with VAT:
£3,259.25
NIDEC CORP
CONTROL TECHNIQUES
7004-0076
DISCONTINUED BY MANUFACTURER, ISS5, CD-750K, DRIVE BOARD
✓ IN STOCK!
£178.69
Price with VAT:
£214.43
NIDEC CORP
CONTROL TECHNIQUES
2438-3223
DISCONTINUED BY MANUFACTURER, THYRISTOR STACK, SILICON CONTROLLED RECTIFIER, 370 I2T, 480V, FOR DRIVE MODEL M700/M700R, FOR DRIVE MODEL M825/M825R
✓ IN STOCK!
£356.49
Price with VAT:
£427.79
NIDEC CORP
CONTROL TECHNIQUES
M016450
DISCONTINUED BY MANUFACTURER, EMERSON, CONTROL TECHNIQUES, M016450, SERVO DRIVE CONTROLLER MODULE PCM-6
✓ IN STOCK!
£184.81
Price with VAT:
£221.77
NIDEC CORP
CONTROL TECHNIQUES
AX-CEN-002
CABLE COMMAND 2FT 45DEGREE CONNECTOR 2ENDS
✓ IN STOCK!
£24.05
Price with VAT:
£28.86
NIDEC CORP
CONTROL TECHNIQUES
4401-0162-10
REGEN SYSTEM SFF INDUCTOR, 3.16 MH, 9.5, POWER ACCESSORIES
✓ IN STOCK!
£299.45
Price with VAT:
£359.34
NIDEC CORP
CONTROL TECHNIQUES
UDBV 6
DISCONTINUED BY MANUFACTURER, CONNECTION BOARD, SCREW TERMINAL, CTNET, FOR SI-APPLICATIONS PLUS AND COMPACT
✓ IN STOCK!
£80.35
Price with VAT:
£96.42
NIDEC CORP
CONTROL TECHNIQUES
3470-0078-00
PANEL MOUNTING KIT, FRAME 07, FOR M400/M600/M700
✓ IN STOCK!
£18.00
Price with VAT:
£21.60
NIDEC CORP
CONTROL TECHNIQUES
UNIPOD
DISCONTINUED BY MANUFACTURER, REMOTE DISPLAY AND KEYPAD FOR THE UNIDRIVE, LED DISPLAY, 24 VDC
✓ IN STOCK!
£77.03
Price with VAT:
£92.44
NIDEC CORP
CONTROL TECHNIQUES
3470-0010-00
DISCONTINUED BY MANUFACTURER, KIT CONTROL POD, 1X RELAY CONNECTOR, 1X GROUNDING BRACKET, 2X CONTROL CONNECTORS
✓ IN STOCK!
£17.83
Price with VAT:
£21.40
NIDEC CORP
CONTROL TECHNIQUES
M200-01200033A10100AB100
DISCONTINUED BY MANUFACTURER, AC SERVO DRIVE, INPUT:, 200 - 240 VAC (50/60HZ), 8.3AMP, 1 PHASE, OUTPUT:, 0 - 240 VAC (0/550HZ), 3.3AMP, 3 PHASE, 0.55KW/0.75HP, AIR COOLED, WITH BRAKE TRANSIS ...
✓ IN STOCK!
£129.29
Price with VAT:
£155.15
NIDEC CORP
CONTROL TECHNIQUES
3470-0011-00
DISCONTINUED BY MANUFACTURER, MOUNTING KIT, SPMC/U RECTIFIER
✓ IN STOCK!
£10.54
Price with VAT:
£12.65
NIDEC CORP
CONTROL TECHNIQUES
82100000012500
EXTENDED I/O INTERFACE, 1 ANALOG INPUT, 10 V BIPOLAR, 4-20/0-20 MA, 3 DIGITAL INPUTS, 1 ANALOG OUTPUT 0-10V / 4-20/ 0-20 MA, 1 RELAY CONTACT, 2 AMP, 240 V, 4 AMP, 30 VDC, 1 FREQUENCY INPUT, ...
✓ IN STOCK!
£57.05
Price with VAT:
£68.46
NIDEC CORP
CONTROL TECHNIQUES
3470-0002-04
DISCONTINUED BY MANUFACTURER, UNIDRIVE REPAIR KIT, SIZE 1
✓ IN STOCK!
£39.43
Price with VAT:
£47.32
NIDEC CORP
CONTROL TECHNIQUES
UD-BV-1
DISCONTINUED BY MANUFACTURER, BREAK OUT BOARD, FOR SERVO MOTOR, SCREW TERMINAL, 15 POSITIONS
✓ IN STOCK!
£14.93
Price with VAT:
£17.92
NIDEC CORP
CONTROL TECHNIQUES
4200-0010
DISCONTINUED BY MANUFACTURER, RFI FILTER, 10AMP, 380-480VAC, 50/60HZ
✓ IN STOCK!
£64.91
Price with VAT:
£77.89
NIDEC CORP
CONTROL TECHNIQUES
CMDX-003
COMMAND CABLE, STRAIGHT DB44M CONNECTORS
✓ IN STOCK!
£38.15
Price with VAT:
£45.78
NIDEC CORP
CONTROL TECHNIQUES
142UDC200BASAA
SERVO MOTOR, 4.48 KW, 2585 RPM, 11.9 AMP, 10 POLE, 380/480 V, 25 NM
✓ IN STOCK!
£2,016.05
Price with VAT:
£2,419.26
NIDEC CORP
CONTROL TECHNIQUES
MV61-024007AA2
DISCONTINUED BY MANUFACTURER, SERVO MOTOR, INPUT / 3 PHASE / 400 V, OUTPUT / 7 AMP / 3 PHASE / 0-400 V
✓ IN STOCK!
£1,225.56
Price with VAT:
£1,470.67
NIDEC CORP
CONTROL TECHNIQUES
115UDD306BARAA
DISCONTINUED BY MANUFACTURER, SERVO MOTOR, UNIMOTOR, 460 V, BRAKE 0.73A 16NM 24 VDC, 250 FRAME, 3000/4800 RPM, POWER AND SIGNAL 90 DEGREE ROTATABLE 1" CONNECTION, KEYWAY OUTPUT SHAFT W / FUL ...
✓ IN STOCK!
£928.18
Price with VAT:
£1,113.82
NIDEC CORP
CONTROL TECHNIQUES
075U2A300BASAA075110
DISCONTINUED BY MANUFACTURER, SERVO MOTOR, UNIMOTOR FM, 75 MM FRAME SIZE, 400 VAC, 50/60 HZ, STANDARD PEAK TORQUE, A TYPE FRAME, 1.2 NM, 4800 RPM MAX, IP 65, SIX POLES
✓ IN STOCK!
£595.62
Price with VAT:
£714.75
