SEARCH NOW FOR ALL YOUR HERTEL SOLUTIONS
Radwell is here to supply you with all your plant floor needs.
Radwell is not an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.
Rockwell Disclaimer: The product is used surplus. Radwell is not an authorised surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorised dealers. Because Radwell is not an authorised distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Radwell makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Radwell also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Radwell also makes no representations as to your right to install any such firmware on the product. Radwell will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Filter Results
KENNAMETAL
HERTEL
SZ0034B
ABRASIVE BUR: SD-9, BALL (MOQ=1, PKG QTY=1)SZ0034B
£48.94
Price with VAT:
£58.73
KENNAMETAL
HERTEL
R127930-S
1-1/2 - 11-1/2 7-FLUTE BRIGHT FINISH HIGH SPEED STEEL STANDARD FLUTE TAP 4-1/4" OAL, NPTR127930-S
£180.20
Price with VAT:
£216.25
KENNAMETAL
HERTEL
MTS 35
INSERT SCREW FOR INDEXABLES, TORX DRIVE INSERT HOLDING SCREW COMPATIBLE (MOQ=10, PKG QTY=1)MTS 35
£3.75
Price with VAT:
£4.50
KENNAMETAL
HERTEL
MTS 255
INSERT SCREW FOR INDEXABLES, TORX DRIVE INSERT HOLDING SCREW COMPATIBLE (MOQ=10, PKG QTY=1)MTS 255
£6.23
Price with VAT:
£7.48
KENNAMETAL
HERTEL
MTS 224
INSERT SCREW FOR INDEXABLES, TORX DRIVE INSERT HOLDING SCREW COMPATIBLE (MOQ=5, PKG QTY=1)MTS 224
£5.78
Price with VAT:
£6.94
KENNAMETAL
HERTEL
MTS 184
INSERT SCREW FOR INDEXABLES, TORX DRIVE INSERT HOLDING SCREW COMPATIBLE (MOQ=5, PKG QTY=1)MTS 184
£5.78
Price with VAT:
£6.94
KENNAMETAL
HERTEL
MTS 183
INSERT SCREW FOR INDEXABLES, TORX DRIVE INSERT HOLDING SCREW COMPATIBLE (MOQ=5, PKG QTY=1)MTS 183
£5.78
Price with VAT:
£6.94
KENNAMETAL
HERTEL
MR34-0433.406
CHUCKING REAMER, 1 - 2 MM DIAMETER RANGE, 1.1 MM DIAMETER, SOLID CARBIDE, SPIRAL FLUTE, LEFT HAND SPIRAL, BRIGHT/UNCOATED, STRAIGHT-CLYINDRICAL SHANK, NO DOWELL PIN REAMER, 50 MM LENGTH, 4 F ...
£51.91
Price with VAT:
£62.29
KENNAMETAL
HERTEL
MCLNR124B
INDEXABLE TURNING TOOLHOLDER, 3/4IN X 3/4IN SHANK, SCREW CLAMP, RIGHT HAND,
✓ IN STOCK!
£87.70
Price with VAT:
£105.24
KENNAMETAL
HERTEL
H82331646
GROOVING INSERT, SOLID CARBIDE, TIC/TIN FINISH, INSERT HAND: RIGHT HAND, 0.055 INCH CUTTING WIDTH, 0.071 INCH MAX DEPTH, EXTERNAL RELIEF ANGLE: 10, INSCRIBED CIRCLE: 3/8 INCH, INSERT STYLE:1 ...
£11.12
Price with VAT:
£13.35
KENNAMETAL
HERTEL
H-81154040000
COMBO DRILL & COUNTERSINK: #4, 5/16" BODY DIAM, BRIGHT FINISH, HIGH SPEED STEEL, 2-1/8" OAL, DOUBLE END, PLAIN EDGE, 1/8" DRILL POINT DIAM, 1/8" DRILL POINT LENGTHH-81154040000
£8.16
Price with VAT:
£9.79
KENNAMETAL
HERTEL
H59868372
BORING BAR, 0.208" MIN BORE, 1-7/8" MAX DEPTH, RIGHT HAND HBBC INDEXABLE 6" OAL, 3/16" SHANK DIAM, USES CD.., HBBC INSERTS, THROUGH COOLANT
£186.14
Price with VAT:
£223.36
KENNAMETAL
HERTEL
H08716540
SCREW FOR INDEXABLES :FOR USE WITH INSERTS (MOQ=5, PKG QTY=1)H08716540
£2.75
Price with VAT:
£3.30
KENNAMETAL
HERTEL
H08716516
SCREWS FOR INDEXABLE THREADING FOR USE WITH INSERTSH08716516
£1.64
Price with VAT:
£1.97
KENNAMETAL
HERTEL
H08700627
SCREWS FOR INDEXABLE THREADING FOR USE WITH ANVILSH08700627
£1.54
Price with VAT:
£1.85
KENNAMETAL
HERTEL
H08700619
SCREW FOR INDEXABLES :FOR USE WITH INSERTS (MOQ=5, PKG QTY=1)H08700619
£3.91
Price with VAT:
£4.69
KENNAMETAL
HERTEL
H08700502
SCREWS FOR INDEXABLE THREADING FOR USE WITH ANVILSH08700502
£1.67
Price with VAT:
£2.00
KENNAMETAL
HERTEL
H08700452
SCREW FOR INDEXABLES :FOR USE WITH INSERTS (MOQ=5, PKG QTY=1)H08700452
£2.89
Price with VAT:
£3.47
KENNAMETAL
HERTEL
H08700403
SCREW FOR INDEXABLES :FOR USE WITH INSERTS (MOQ=5, PKG QTY=1)H08700403
£3.57
Price with VAT:
£4.28
KENNAMETAL
HERTEL
H00481556
SCREW FOR INDEXABLES :FOR USE WITH ANVILS (MOQ=5, PKG QTY=1)H00481556
£2.09
Price with VAT:
£2.51
KENNAMETAL
HERTEL
H00481515
SCREWS FOR INDEXABLE THREADING FOR USE WITH INSERTSH00481515
£1.62
Price with VAT:
£1.95
KENNAMETAL
HERTEL
G837600
EXTENSION TAP, SPIRAL POINT TAP TYPE, 3/8-16 INCH THREAD SIZE, UNC THREAD STANDARD, H3 THREAD LIMIT, RIGHT HAND THREAD DIRECTION, 6 INCH OVERALL LENGTH, HIGH-SPEED STEEL, REDUCED SHANK, 3 FL ...
£45.98
Price with VAT:
£55.17
KENNAMETAL
HERTEL
FM-200/D6
LATHE CHUCK ADAPTER BACK PLATE, 8" CHUCK, FOR PLAIN BACK SELF-CENTERING CHUCKS SERIES D, D1-6 MOUNT, 8" OD, 4-1/16" THROUGH-HOLE DIA, 1-7/16" FLANGE HEIGHT, STEEL
£182.43
Price with VAT:
£218.92
KENNAMETAL
HERTEL
FM-200/A6
LATHE CHUCK ADAPTER BACK PLATE, 8" CHUCK, FOR PLAIN BACK SELF-CENTERING CHUCKS SERIES A, A1/A2-6 MOUNT, 8" OD, 4-1/16" THROUGH-HOLE DIA, 21/64" FLANGE HEIGHT, STEELFM-200/A6
£153.51
Price with VAT:
£184.21
KENNAMETAL
HERTEL
ETS 4-40
INSERT SCREW FOR INDEXABLES, TORX DRIVE INSERT HOLDING SCREW COMPATIBLE (MOQ=10, PKG QTY=1)ETS 4-40
£5.78
Price with VAT:
£6.94
KENNAMETAL
HERTEL
E5249024
3/8" DIAM, 1" LOC, 2 FLUTE SOLID CARBIDE BALL END MILL UNCOATED, SINGLE END, 2-1/2" OAL, 3/8" SHANK DIAME5249024
£19.28
Price with VAT:
£23.14
KENNAMETAL
HERTEL
CTCONO8-3J
CTCO N TOOLHOLDER, STYLE C, 0 END CUTTING EDGE ANGLE, FOR 11 POSITIVE TRIANGLE
£43.75
Price with VAT:
£52.50
KENNAMETAL
HERTEL
CH-SA-56212
CLAMP SPINDLE RETAINERS & FLANGED WASHERS; TYPE: FLAT TIP ; FOR SPINDLE DIAMETER (INCH): 5/16 ; THREAD SIZE: 5/16-18 ; MATERIAL: CARBON STEEL ; FINISH COATING: ZINC ; OVERALL LENGTH (INCH): ...
£1.07
Price with VAT:
£1.28
KENNAMETAL
HERTEL
CH-SA-38300
CLAMP SPINDLE RETAINERS & FLANGED WASHERS; TYPE: FLAT TIP ; FOR SPINDLE DIAMETER (INCH): 3/8 ; THREAD SIZE: 3/8-16 ; MATERIAL: CARBON STEEL ; FINISH COATING: ZINC ; OVERALL LENGTH (INCH): 3 ...
£4.89
Price with VAT:
£5.87
KENNAMETAL
HERTEL
CH-SA-14134
CLAMP SPINDLE RETAINERS & FLANGED WASHERS; TYPE: FLAT TIP ; FOR SPINDLE DIAMETER (INCH): 1/4 ; THREAD SIZE: 1/4-20 ; MATERIAL: CARBON STEEL ; FINISH COATING: ZINC ; OVERALL LENGTH (INCH): 1- ...
£1.04
Price with VAT:
£1.25
KENNAMETAL
HERTEL
CH-SA-08034-T2
CLAMP SPINDLE ASSEMBLIES; APPLICATION: TOGGLE CLAMPS ; SPINDLE MATERIAL: NYLON ; THREAD SIZE: #5-32 ; THREAD LENGTH (MM): 0.7500 ; TIP TYPE: HEX ; TIP SURFACE DIAMETER (DECIMAL INCH): 0.1563 ...
£0.48
Price with VAT:
£0.57
KENNAMETAL
HERTEL
CH-SA-08034-T1
CLAMP SPINDLE ASSEMBLIES; APPLICATION: TOGGLE CLAMPS ; SPINDLE MATERIAL: NYLON ; THREAD SIZE: #5-32 ; THREAD LENGTH (MM): 0.7500 ; TIP TYPE: HEX ; TIP SURFACE DIAMETER (DECIMAL INCH): 0.1563 ...
£0.50
Price with VAT:
£0.60
KENNAMETAL
HERTEL
CH-FW-516
CLAMP SPINDLE RETAINERS & FLANGED WASHERS; MATERIAL: CARBON STEEL ; MATERIAL: CARBON STEEL ; HOLE DIAMETER (DECIMAL INCH): 0.3220 ; HOLE DIAMETER (MM): 0.3220 ; HOLE DIAMETER: 0.3220 ; FINIS ...
£0.25
Price with VAT:
£0.30
KENNAMETAL
HERTEL
CH-FW-380
CLAMP SPINDLE RETAINERS & FLANGED WASHERS; OVERALL WIDTH (DECIMAL INCH - 4 DECIMALS): 0.7500 ; MATERIAL: CARBON STEEL ; HOLE DIAMETER: 0.4000 ; FINISH COATING: ZINC ; UNSPSC CODE: 31161800 ( ...
£0.31
Price with VAT:
£0.37
KENNAMETAL
HERTEL
CH-FW-141
CARBON STEEL, FLANGED WASHER FOR M6 DIAM CLAMP SPINDLE (MOQ=1, PKG QTY=1)CH-FW-141
£7.12
Price with VAT:
£8.54
KENNAMETAL
HERTEL
CH-FW-120
CLAMP SPINDLE RETAINERS & FLANGED WASHERS; OVERALL WIDTH (DECIMAL INCH - 4 DECIMALS): 0.9720 ; MATERIAL: CARBON STEEL ; HOLE DIAMETER: 0.5100 ; FINISH COATING: ZINC ; UNSPSC CODE: 31161800 ( ...
£8.90
Price with VAT:
£10.68
KENNAMETAL
HERTEL
CH-FW-100
CLAMP SPINDLE RETAINERS & FLANGED WASHERS; MATERIAL: CARBON STEEL ; MATERIAL: CARBON STEEL ; HOLE DIAMETER (DECIMAL INCH): 0.1650 ; HOLE DIAMETER (MM): 0.1650 ; HOLE DIAMETER: 0.1650 ; FINIS ...
£0.28
Price with VAT:
£0.34
KENNAMETAL
HERTEL
CH-FW-080
CLAMP SPINDLE RETAINERS & FLANGED WASHERS; OVERALL WIDTH (DECIMAL INCH - 4 DECIMALS): 0.3260 ; MATERIAL: CARBON STEEL ; HOLE DIAMETER: 0.1690 ; FINISH COATING: ZINC ; UNSPSC CODE: 31161800 ( ...
£0.43
Price with VAT:
£0.52
KENNAMETAL
HERTEL
CH-FC-121017
CLAMP SPINDLE RETAINERS & FLANGED WASHERS, TYPE, CAP, TYPE, CAP, FOR SPINDLE DIAMETER (MM), M12, FOR SPINDLE DIAMETER (MM - 0 DECIMALS), M12, THREAD SIZE, M12X1.75, THREAD SIZE, M12X1.75, MA ...
£2.07
Price with VAT:
£2.48
KENNAMETAL
HERTEL
CH-FC-108515 PB
CLAMP SPINDLE RETAINERS & FLANGED WASHERS; TYPE: CAP ; FOR SPINDLE DIAMETER (MM - 0 DECIMALS): M10 ; THREAD SIZE: M10X1.5 ; MATERIAL: CARBON STEEL ; FINISH COATING: ZINC ; OVERALL LENGTH (MM ...
£2.92
Price with VAT:
£3.50
KENNAMETAL
HERTEL
CH-FC-086312
CLAMP SPINDLE RETAINERS & FLANGED WASHERS, TYPE, CAP, TYPE, CAP, FOR SPINDLE DIAMETER (MM), M8, FOR SPINDLE DIAMETER (MM - 0 DECIMALS), M8, THREAD SIZE, M8 X 1.25, THREAD SIZE, M8 X 1.25, MA ...
£1.00
Price with VAT:
£1.21
KENNAMETAL
HERTEL
CH-FC-064410
CLAMP SPINDLE RETAINERS & FLANGED WASHERS, TYPE, CAP, TYPE, CAP, FOR SPINDLE DIAMETER (MM), M6, FOR SPINDLE DIAMETER (MM - 0 DECIMALS), M6, THREAD SIZE, M6 X 1.0, THREAD SIZE, M6 X 1.0, MATE ...
£3.44
Price with VAT:
£4.13
KENNAMETAL
HERTEL
CH-FC-053508 PB
CLAMP SPINDLE RETAINERS & FLANGED WASHERS; TYPE: CAP; TYPE: CAP; FOR SPINDLE DIAMETER (MM): M5; FOR SPINDLE DIAMETER (MM - 0 DECIMALS): M5; THREAD SIZE: M5 X 0.8; THREAD SIZE: M5 X 0.8; MATE ...
£3.95
Price with VAT:
£4.74
KENNAMETAL
HERTEL
CH-D317
MANUAL HOLD-DOWN TOGGLE CLAMP, HORIZONTAL, 375 LB CAPACITY, U-BAR, FLANGED BASE 60 ° HANDLE MOVEMENT, 185 ° BAR OPENING, STEELCH-D317
£20.02
Price with VAT:
£24.03
KENNAMETAL
HERTEL
CH-D237-U
MANUAL HOLD-DOWN TOGGLE CLAMP, HORIZONTAL, 750 LB CAPACITY, U-BAR, FLANGED BASE 59 ° HANDLE MOVEMENT, 93 ° BAR OPENING, STEELCH-D237-U
£21.51
Price with VAT:
£25.81
KENNAMETAL
HERTEL
CH-D217-U
MANUAL HOLD-DOWN TOGGLE CLAMP, HORIZONTAL, 200 LB CAPACITY, U-BAR, FLANGED BASE 61 ° HANDLE MOVEMENT, 91 ° BAR OPENING, STEELCH-D217-U
£12.61
Price with VAT:
£15.13
KENNAMETAL
HERTEL
CH-D202-UL
MANUAL HOLD-DOWN TOGGLE CLAMP, HANDLE ORIENTATION: VERTICAL, BAR STYLE: U-BAR, BASE STYLE: FLANGED, BAR END TYPE: CLOSED, HOLDING CAPACITY: 90.72 KG, 65 DEGREE HANDLE MOVEMENT
£10.38
Price with VAT:
£12.46
KENNAMETAL
HERTEL
CH-451
PULL-ACTION LATCH CLAMP, HORIZONTAL, 375 LB, U-HOOK, FLANGED BASE 4" DRAWING MOVEMENT, 5.63" OAL, STRAIGHT HANDLE, STEELCH-451
£12.61
Price with VAT:
£15.13
