SEARCH NOW FOR ALL YOUR IRONHORSE SOLUTIONS
Radwell is here to supply you with all your plant floor needs.
Radwell is not an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.
Filter Results
AUTOMATION DIRECT
IRONHORSE
HMX1-LM22-AC
IRONHORSE LINK MODULE, FOR USE WITH HMMP-32H MANUAL MOTOR PROTECTORS AND HMC-9 TO HMC-22 CONTACTORS WITH AC COILS.
£8.80
Price with VAT:
£10.56
Repair Yours
Contact Us
AUTOMATION DIRECT
IRONHORSE
HMC-12B30-11-AS
IRONHORSE IEC CONTACTOR, 12A, (3) N.O. POWER POLES, (1) N.O./(1) N.C. AUXILIARY CONTACTS, 120 VAC (50/60HZ) COIL VOLTAGE.
£16.30
Price with VAT:
£19.56
Repair Yours
Contact Us
AUTOMATION DIRECT
IRONHORSE
HMC-12B30-11-DS
IRONHORSE IEC CONTACTOR, 12A, (3) N.O. POWER POLES, (1) N.O./(1) N.C. AUXILIARY CONTACTS, 24 VDC COIL VOLTAGE.
£24.45
Price with VAT:
£29.34
Repair Yours
Contact Us
AUTOMATION DIRECT
IRONHORSE
HMC-22B30-11-DS
IRONHORSE IEC CONTACTOR, 22A, (3) N.O. POWER POLES, (1) N.O./(1) N.C. AUXILIARY CONTACTS, 24 VDC COIL VOLTAGE.
£28.90
Price with VAT:
£34.68
Repair Yours
Contact Us
AUTOMATION DIRECT
IRONHORSE
HMC-40A30-22-CS
IRONHORSE IEC CONTACTOR, 40A, (3) N.O. POWER POLES, (2) N.O./(2) N.C. AUXILIARY CONTACTS, 230 VAC (50/60HZ) COIL VOLTAGE.
✓ IN STOCK!
£38.88
Price with VAT:
£46.66
Repair Yours
Contact Us
AUTOMATION DIRECT
IRONHORSE
HMC-32A30-22-DS
IRONHORSE IEC CONTACTOR, 32A, (3) N.O. POWER POLES, (2) N.O./(2) N.C. AUXILIARY CONTACTS, 24 VDC COIL VOLTAGE.
£51.12
Price with VAT:
£61.34
Repair Yours
Contact Us
AUTOMATION DIRECT
IRONHORSE
HMC-65A30-22-AL
IRONHORSE IEC CONTACTOR, 65A, (3) N.O. POWER POLES, (2) N.O./(2) N.C. AUXILIARY CONTACTS, 120 VAC (50/60HZ) COIL VOLTAGE.
£64.46
Price with VAT:
£77.35
Repair Yours
Contact Us
AUTOMATION DIRECT
IRONHORSE
GSD4-24A-5C
IRONHORSE GSD4 SERIES DC GENERAL PURPOSE DRIVE, 24/36 VAC, 1-PHASE, 1/50 TO 1/6HP AT 24-36 VDC, 5.5A, OPEN FRAME, PANEL MOUNT, FIELD-INSTALL REVERSE, POTENTIOMETER INPUT, SCR OUTPUT.
✓ IN STOCK!
£134.98
Price with VAT:
£161.98
Repair Yours
Contact Us
AUTOMATION DIRECT
IRONHORSE
GSDA-AI-V5
IRONHORSE GSD5 SERIES ANALOG INPUT MODULE, 1-CHANNEL, CURRENT/VOLTAGE, ISOLATED, INPUT CURRENT SIGNAL RANGE(S) OF 4-20 MA, INPUT VOLTAGE SIGNAL RANGE(S) OF 0-5 VDC, 0-250 VDC.
✓ IN STOCK!
£97.57
Price with VAT:
£117.08
Repair Yours
Contact Us
AUTOMATION DIRECT
IRONHORSE
HMC-50A30-22-AL
IRONHORSE IEC CONTACTOR, 50A, (3) N.O. POWER POLES, (2) N.O./(2) N.C. AUXILIARY CONTACTS, 120 VAC (50/60HZ) COIL VOLTAGE.
£76.29
Price with VAT:
£91.55
Repair Yours
Contact Us
AUTOMATION DIRECT
IRONHORSE
GSD3-240-2CJ
IRONHORSE GSD3 SERIES DC GENERAL PURPOSE DRIVE, 120/240 VAC, 1-PHASE, 1/50 TO 1/6HP AT 90 VDC AND 1/25 TO 1/3HP AT 180 VDC, 2A, OPEN FRAME, J STYLE MOUNT, FIELD-INSTALL REVERSE, POTENTIOMETE ...
✓ IN STOCK!
£78.54
Price with VAT:
£94.25
Repair Yours
Contact Us
AUTOMATION DIRECT
IRONHORSE
MTPM-P03-1L18
IRONHORSE MTPM DC PERMANENT MAGNET MOTOR, SCR-PWM RATED, 1/31HP, 90 VDC, 1797RPM, TENV, SMALL FRAME, ROLLED STEEL, FLANGE MOUNT.
✓ IN STOCK!
£129.84
Price with VAT:
£155.81
Repair Yours
Contact Us
AUTOMATION DIRECT
IRONHORSE
MTPM-P10-1JK43
IRONHORSE MTPM DC PERMANENT MAGNET MOTOR, SCR-PWM RATED, 1/10HP, 12/24 VDC, 1746/4252RPM, TENV, SMALL FRAME, ROLLED STEEL, FLANGE MOUNT.
✓ IN STOCK!
£92.36
Price with VAT:
£110.83
Repair Yours
Contact Us
AUTOMATION DIRECT
IRONHORSE
HMC-65A30-22-DL
IRONHORSE IEC CONTACTOR, 65A, (3) N.O. POWER POLES, (2) N.O./(2) N.C. AUXILIARY CONTACTS, 24 VDC COIL VOLTAGE.
£93.16
Price with VAT:
£111.79
Repair Yours
Contact Us
AUTOMATION DIRECT
IRONHORSE
GSDA-AI-V4A
IRONHORSE GSD4A SERIES ANALOG INPUT MODULE, 1-CHANNEL, CURRENT/VOLTAGE, ISOLATED, INPUT CURRENT SIGNAL RANGE(S) OF 4-20 MA, INPUT VOLTAGE SIGNAL RANGE(S) OF 0-5 VDC, 0-250 VDC.
£78.76
Price with VAT:
£94.51
Repair Yours
Contact Us
AUTOMATION DIRECT
IRONHORSE
WG-175-005-R
IRONHORSE HEAVY-DUTY WORM GEARBOX, 5:1 RATIO, NEMA 56C INPUT, RIGHT HAND, 0.875IN DIAMETER OUTPUT SHAFT, NOMINAL 2.83HP AT 1.0 SF, 499 LB-IN MECHANICAL OUTPUT TORQUE, 1-3/4IN CENTER DISTANCE ...
✓ IN STOCK!
£216.40
Price with VAT:
£259.68
Repair Yours
Contact Us
AUTOMATION DIRECT
IRONHORSE
GSD4-240-1C
GENERAL PURPOSE DRIVE, IRONHORSE GSD4 SERIES, 120/240 VAC, 1-PHASE, 1/50 TO 1/8HP AT 90 VDC AND 1/25 TO 1/4HP AT 180 VDC, 1.2A, OPEN FRAME, PANEL MOUNT, FIELD-INSTALL REVERSE, 4-20 MA OR POT ...
✓ IN STOCK!
£102.99
Price with VAT:
£123.59
Repair Yours
Contact Us
AUTOMATION DIRECT
IRONHORSE
HMC-100A30-22-CL
IRONHORSE IEC CONTACTOR, 100A, (3) N.O. POWER POLES, (2) N.O./(2) N.C. AUXILIARY CONTACTS, 230 VAC (50/60HZ) COIL VOLTAGE.
£112.62
Price with VAT:
£135.14
Repair Yours
Contact Us
AUTOMATION DIRECT
IRONHORSE
WGA-40M-010-H1
IRONHORSE MEDIUM-DUTY WORM GEARBOX, 10:1 RATIO, NEMA 56C INPUT, HOLLOW, 0.75IN DIAMETER OUTPUT SHAFT, NOMINAL 1.21HP AT 1.0 SF, 370 LB-IN MECHANICAL OUTPUT TORQUE, 40MM CENTER DISTANCE, CAST ...
£128.18
Price with VAT:
£153.82
AUTOMATION DIRECT
IRONHORSE
HMC-85A30-22-DL
IRONHORSE IEC CONTACTOR, 85A, (3) N.O. POWER POLES, (2) N.O./(2) N.C. AUXILIARY CONTACTS, 24 VDC COIL VOLTAGE.
£137.07
Price with VAT:
£164.48
AUTOMATION DIRECT
IRONHORSE
HMC-100A30-22-EL
IRONHORSE IEC CONTACTOR, 100A, (3) N.O. POWER POLES, (2) N.O./(2) N.C. AUXILIARY CONTACTS, 480 VAC (60HZ) COIL VOLTAGE.
£120.03
Price with VAT:
£144.04
AUTOMATION DIRECT
IRONHORSE
WG-175-005-D
IRONHORSE HEAVY-DUTY WORM GEARBOX, 5:1 RATIO, NEMA 56C INPUT, DUAL, 0.875IN DIAMETER OUTPUT SHAFT, NOMINAL 2.83HP AT 1.0 SF, 499 LB-IN MECHANICAL OUTPUT TORQUE, 1-3/4IN CENTER DISTANCE, CAST ...
✓ IN STOCK!
£148.18
Price with VAT:
£177.82
AUTOMATION DIRECT
IRONHORSE
MTPM-P17-1JK43
IRONHORSE MTPM DC PERMANENT MAGNET MOTOR, SCR-PWM RATED, 1/6HP, 12/24 VDC, 1841/4290RPM, TENV, SMALL FRAME, ROLLED STEEL, FLANGE MOUNT.
✓ IN STOCK!
£142.25
Price with VAT:
£170.70
AUTOMATION DIRECT
IRONHORSE
MTR2-P33-3BD18
IRONHORSE MTR STANDARD EFFICIENCY AC INDUCTION MOTOR, GENERAL PURPOSE AND INVERTER RATED, 1/3HP, 3-PHASE, 230/460 VAC, 1800RPM, TEFC, NEMA 56C FRAME, ROLLED STEEL, C-FACE/REMOVABLE RIGID BAS ...
✓ IN STOCK!
£122.14
Price with VAT:
£146.57
AUTOMATION DIRECT
IRONHORSE
GSD5-240-10N4
IRONHORSE GSD5 SERIES DC GENERAL PURPOSE DRIVE, 120/240 VAC, 1-PHASE, 1/8 TO 1HP AT 90 VDC AND 1/4 TO 2HP AT 180 VDC, 10.8A, NEMA 4/12, WALL MOUNT, FIELD-INSTALL REVERSE, POTENTIOMETER INPUT ...
✓ IN STOCK!
£245.24
Price with VAT:
£294.29
AUTOMATION DIRECT
IRONHORSE
GSD7-120-5CR3
IRONHORSE GSD7 SERIES DC REVERSING DRIVE, 120 VAC, 1-PHASE, 1/8 TO 1/2HP AT 90 VDC, 5.5A, OPEN FRAME, PANEL MOUNT, BUILT-IN REVERSE, MAXIMUM 3 REVERSES/MINUTE, POTENTIOMETER INPUT, SCR OUTPU ...
✓ IN STOCK!
£134.13
Price with VAT:
£160.96
AUTOMATION DIRECT
IRONHORSE
MTGP-P06-1J097
IRONHORSE MTGP SERIES PARALLEL SHAFT DC GEAR MOTOR, 1/16HP, 12 VDC, 97RPM, 36 LB-IN FULL LOAD TORQUE, 5.68 FLA, 26:1 RATIO, 5/16IN SHAFT DIAMETER.
✓ IN STOCK!
£174.85
Price with VAT:
£209.82
AUTOMATION DIRECT
IRONHORSE
WG-237-020-L
IRONHORSE HEAVY-DUTY WORM GEARBOX, 20:1 RATIO, NEMA 56C INPUT, LEFT HAND, 1.125IN DIAMETER OUTPUT SHAFT, NOMINAL 2.06HP AT 1.0 SF, 1195 LB-IN MECHANICAL OUTPUT TORQUE, 2-3/8IN CENTER DISTANC ...
✓ IN STOCK!
£188.63
Price with VAT:
£226.36
AUTOMATION DIRECT
IRONHORSE
MTR2-P50-3BD18
IRONHORSE MTR STANDARD EFFICIENCY AC INDUCTION MOTOR, GENERAL PURPOSE AND INVERTER RATED, 1/2HP, 3-PHASE, 230/460 VAC, 1800RPM, TEFC, NEMA 56C FRAME, ROLLED STEEL, C-FACE/REMOVABLE RIGID BAS ...
✓ IN STOCK!
£143.74
Price with VAT:
£172.49
AUTOMATION DIRECT
IRONHORSE
MTPM-P14-1L19
IRONHORSE MTPM DC PERMANENT MAGNET MOTOR, SCR-PWM RATED, 1/7HP, 90 VDC, 1740RPM, TENV, SMALL FRAME, ROLLED STEEL, FLANGE MOUNT.
£175.32
Price with VAT:
£210.38
AUTOMATION DIRECT
IRONHORSE
MTPM-P25-1JK40
IRONHORSE MTPM DC PERMANENT MAGNET MOTOR, SCR-PWM RATED, 1/4HP, 12/24 VDC, 1732/3996RPM, TENV, SMALL FRAME, ROLLED STEEL, FLANGE MOUNT.
£169.46
Price with VAT:
£203.35
AUTOMATION DIRECT
IRONHORSE
GSD3-240-3N4
IRONHORSE GSD3 SERIES DC GENERAL PURPOSE DRIVE, 120/240 VAC, 1-PHASE, 1/50 TO 1/3HP AT 90 VDC AND 1/25 TO 2/3HP AT 180 VDC, 3A, NEMA 4, PANEL MOUNT, FIELD-INSTALL REVERSE, POTENTIOMETER INPU ...
£143.00
Price with VAT:
£171.60
AUTOMATION DIRECT
IRONHORSE
WG-175-040-L
IRONHORSE HEAVY-DUTY WORM GEARBOX, 40:1 RATIO, NEMA 56C INPUT, LEFT HAND, 0.875IN DIAMETER OUTPUT SHAFT, NOMINAL 0.74HP AT 1.0 SF, 714 LB-IN MECHANICAL OUTPUT TORQUE, 1-3/4IN CENTER DISTANCE ...
£169.46
Price with VAT:
£203.35
AUTOMATION DIRECT
IRONHORSE
WG-206-060-L
IRONHORSE HEAVY-DUTY WORM GEARBOX, 60:1 RATIO, NEMA 56C INPUT, LEFT HAND, 1IN DIAMETER OUTPUT SHAFT, NOMINAL 0.6HP AT 1.0 SF, 750 LB-IN MECHANICAL OUTPUT TORQUE, 2-1/16IN CENTER DISTANCE, CA ...
£215.67
Price with VAT:
£258.80
AUTOMATION DIRECT
IRONHORSE
GSDA-PU2R
IRONHORSE ENCODER, 5-24 VDC, NPN OPEN COLLECTOR OUTPUT, 1/10/20 PPR, 61MM DIAMETER BODY, NEMA 3R, IP14, 6FT CABLE LENGTH, PIGTAIL. FOR USE WITH GSD8 SERIES DC DRIVES. MOUNTING HARDWARE AND ( ...
£133.00
Price with VAT:
£159.60
AUTOMATION DIRECT
IRONHORSE
MTPM-P25-1JK44
IRONHORSE MTPM DC PERMANENT MAGNET MOTOR, SCR-PWM RATED, 1/4HP, 12/24 VDC, 1854/4375RPM, TENV, SMALL FRAME, ROLLED STEEL, FLANGE MOUNT.
£169.46
Price with VAT:
£203.35
AUTOMATION DIRECT
IRONHORSE
GSD4A-240-2C
IRONHORSE GSD4A SERIES DC GENERAL PURPOSE DRIVE, 120/240 VAC, 1-PHASE, 1/50 TO 1/8HP AT 90 VDC AND 1/25 TO 1/4HP AT 180 VDC, 2A, OPEN FRAME, PANEL MOUNT, FIELD-INSTALL REVERSE, POTENTIOMETER ...
£101.79
Price with VAT:
£122.15
AUTOMATION DIRECT
IRONHORSE
GSDA-AI-A8
IRONHORSE GSD8 SERIES RELAY/ANALOG COMBO MODULE, ANALOG INPUT: 1-CHANNEL, CURRENT, ANALOG OUTPUT: 1-CHANNEL, CURRENT, DISCRETE OUTPUT: 1-POINT, RELAY, (1) FORM C (SPDT) RELAY. FOR USE WITH M ...
£149.35
Price with VAT:
£179.21
AUTOMATION DIRECT
IRONHORSE
HMC-100A30-22-DL
IRONHORSE IEC CONTACTOR, 100A, (3) N.O. POWER POLES, (2) N.O./(2) N.C. AUXILIARY CONTACTS, 24 VDC COIL VOLTAGE.
£168.72
Price with VAT:
£202.46
AUTOMATION DIRECT
IRONHORSE
MTGP-P20-1J154
IRONHORSE MTGP SERIES PARALLEL SHAFT DC GEAR MOTOR, 1/5HP, 12 VDC, 154RPM, 61 LB-IN FULL LOAD TORQUE, 15.6 FLA, 11:1 RATIO, 5/8IN SHAFT DIAMETER.
✓ IN STOCK!
£251.17
Price with VAT:
£301.40
AUTOMATION DIRECT
IRONHORSE
HMC-150A30-22-DL
IRONHORSE IEC CONTACTOR, 150A, (3) N.O. POWER POLES, (2) N.O./(2) N.C. AUXILIARY CONTACTS, 24 VDC COIL VOLTAGE.
£251.17
Price with VAT:
£301.40
AUTOMATION DIRECT
IRONHORSE
WGA-75M-040-H1
IRONHORSE MEDIUM-DUTY WORM GEARBOX, 40:1 RATIO, NEMA 56C INPUT, HOLLOW, 1.25IN DIAMETER OUTPUT SHAFT, NOMINAL 1.9HP AT 1.0 SF, 2029 LB-IN MECHANICAL OUTPUT TORQUE, 75MM CENTER DISTANCE, CAST ...
✓ IN STOCK!
£266.73
Price with VAT:
£320.08
AUTOMATION DIRECT
IRONHORSE
HMC-225A30-22-HB
IRONHORSE IEC CONTACTOR, 225A, (3) N.O. POWER POLES, (2) N.O./(2) N.C. AUXILIARY CONTACTS, 24-25 VAC (50/60HZ)/24 VDC COIL VOLTAGE, LOW CONSUMPTION ELECTRONIC.
£267.47
Price with VAT:
£320.96
AUTOMATION DIRECT
IRONHORSE
MTPM-P75-1M18
IRONHORSE MTPM DC PERMANENT MAGNET MOTOR, SCR-PWM RATED, 3/4HP, 180 VDC, 1800RPM, TEFC, NEMA 56C FRAME, ROLLED STEEL, C-FACE/REMOVABLE RIGID BASE MOUNT. REPLACEMENT BRUSHES INCLUDED.
✓ IN STOCK!
£271.17
Price with VAT:
£325.40
AUTOMATION DIRECT
IRONHORSE
WGA-75M-030-H1
IRONHORSE MEDIUM-DUTY WORM GEARBOX, 30:1 RATIO, NEMA 56C INPUT, HOLLOW, 1.25IN DIAMETER OUTPUT SHAFT, NOMINAL 2.41HP AT 1.0 SF, 2028 LB-IN MECHANICAL OUTPUT TORQUE, 75MM CENTER DISTANCE, CAS ...
✓ IN STOCK!
£255.39
Price with VAT:
£306.47
AUTOMATION DIRECT
IRONHORSE
MTGR-P14-1L077
IRONHORSE MTGR SERIES RIGHT ANGLE SINGLE SHAFT DC GEAR MOTOR, 1/7HP, 90 VDC, 77RPM, 97 LB-IN FULL LOAD TORQUE, 1.65 FLA, 23:1 RATIO, 5/8IN SHAFT DIAMETER.
✓ IN STOCK!
£423.80
Price with VAT:
£508.56
AUTOMATION DIRECT
IRONHORSE
GSD5-240-10N4-A
IRONHORSE GSD5 SERIES DC GENERAL PURPOSE DRIVE, 120/240 VAC, 1-PHASE, 1/8 TO 1HP AT 90 VDC AND 1/4 TO 2HP AT 180 VDC, 10.8A, NEMA 4/12, WALL MOUNT, FIELD-INSTALL REVERSE, CURRENT OR POTENTIO ...
✓ IN STOCK!
£272.89
Price with VAT:
£327.47
AUTOMATION DIRECT
IRONHORSE
WG-262-060-R
IRONHORSE HEAVY-DUTY WORM GEARBOX, 60:1 RATIO, NEMA 56C INPUT, RIGHT HAND, 1.125IN DIAMETER OUTPUT SHAFT, NOMINAL 1.16HP AT 1.0 SF, 1670 LB-IN MECHANICAL OUTPUT TORQUE, 2-5/8IN CENTER DISTAN ...
£280.96
Price with VAT:
£337.15
AUTOMATION DIRECT
IRONHORSE
MTPM-1P5-1M18
IRONHORSE MTPM DC PERMANENT MAGNET MOTOR, SCR-PWM RATED, 1-1/2HP, 180 VDC, 1800RPM, TEFC, NEMA 56C FRAME, ROLLED STEEL, C-FACE/REMOVABLE RIGID BASE MOUNT. REPLACEMENT BRUSHES INCLUDED.
✓ IN STOCK!
£446.03
Price with VAT:
£535.24
