Product Search

    SEARCH NOW FOR ALL YOUR KENNAMETAL SOLUTIONS

    Radwell is here to supply you with all your plant floor needs.

    Radwell is not an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.

    Rockwell Disclaimer: The product is used surplus. Radwell is not an authorised surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorised dealers. Because Radwell is not an authorised distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Radwell makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Radwell also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Radwell also makes no representations as to your right to install any such firmware on the product. Radwell will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

    Filter Results
    Results 451-500 of 495.
    KENNAMETAL 1191026

    KENNAMETAL

    1191026

    2.5MM DA200 DA COLLET 30.18MM OAL, 13.69MM OVERALL DIAM, 0.03MM TIR
    £46.72 Price with VAT: £56.06 Buy Surplus As Low As £28.18 Price with VAT: £33.82
    £28.18 Price with VAT: £33.82
    KENNAMETAL 1191841

    KENNAMETAL

    1191841

    SERIES SEPARATOR, CM CLAMP FOR INDEXABLES LEFT HAND CUT
    £57.84 Price with VAT: £69.41 Buy Surplus As Low As £34.85 Price with VAT: £41.83
    £34.85 Price with VAT: £41.83
    KENNAMETAL 1260378

    KENNAMETAL

    1260378

    SERIES SEPARATOR, CM CLAMP FOR INDEXABLES RIGHT HAND CUT
    £70.45 Price with VAT: £84.54 Buy Surplus As Low As £42.27 Price with VAT: £50.72
    £42.27 Price with VAT: £50.72
    KENNAMETAL 1297413

    KENNAMETAL

    1297413

    2MM DA300 DA COLLET 1" OAL, 9.53MM OVERALL DIAM, 0.03MM TIR
    £40.05 Price with VAT: £48.05 Buy Surplus As Low As £24.47 Price with VAT: £29.37
    £24.47 Price with VAT: £29.37
    KENNAMETAL 1297415

    KENNAMETAL

    1297415

    3MM DA300 DA COLLET 1" OAL, 9.53MM OVERALL DIAM, 0.03MM TIR
    £40.05 Price with VAT: £48.05 Buy Surplus As Low As £24.47 Price with VAT: £29.37
    £24.47 Price with VAT: £29.37
    KENNAMETAL 1297411

    KENNAMETAL

    1297411

    1MM DA300 DA COLLET 1" OAL, 9.53MM OVERALL DIAM, 0.03MM TIR
    £78.61 Price with VAT: £94.33 Buy Surplus As Low As £47.46 Price with VAT: £56.95
    £47.46 Price with VAT: £56.95
    KENNAMETAL 1606064

    KENNAMETAL

    1606064

    10MM ID X 1/2" OD, 16MM HEAD DIAM, SLOTTED HYDRAULIC CHUCK SLEEVE STEEL, 40.01MM LENGTH UNDER HEAD, THROUGH COOLANT
    £177.98 Price with VAT: £213.58 Buy Surplus As Low As £106.79 Price with VAT: £128.15
    £106.79 Price with VAT: £128.15
    KENNAMETAL 1260391

    KENNAMETAL

    1260391

    SERIES SEPARATOR, CM CLAMP FOR INDEXABLES RIGHT HAND CUT
    £65.26 Price with VAT: £78.31 Buy Surplus As Low As £39.30 Price with VAT: £47.16
    £39.30 Price with VAT: £47.16
    KENNAMETAL 1295604

    KENNAMETAL

    1295604

    1 TO 1.5MM ER16 COLLET 0.0152MM TIR, 27.51MM OAL, 16.99MM OVERALL DIAM
    £46.72 Price with VAT: £56.06 Buy Surplus As Low As £28.18 Price with VAT: £33.82
    £28.18 Price with VAT: £33.82
    KENNAMETAL 1297412

    KENNAMETAL

    1297412

    1.5MM DA300 DA COLLET 1" OAL, 9.53MM OVERALL DIAM, 0.03MM TIR
    £40.05 Price with VAT: £48.05 Buy Surplus As Low As £24.47 Price with VAT: £29.37
    £24.47 Price with VAT: £29.37
    KENNAMETAL 1931561

    KENNAMETAL

    1931561

    M3 TORX PLUS CAP SCREW FOR INDEXABLES INSERT COMPATIBLE
    £6.78 Price with VAT: £8.14 Buy Surplus As Low As £4.07 Price with VAT: £4.88
    £4.07 Price with VAT: £4.88
    KENNAMETAL 2046538

    KENNAMETAL

    2046538

    SERIES ER32 18MM ER HAND TAP COLLET M22 & M24 TAP
    £143.87 Price with VAT: £172.64 Buy Surplus As Low As £86.77 Price with VAT: £104.12
    £86.77 Price with VAT: £104.12
    KENNAMETAL 3641475

    KENNAMETAL

    3641475

    TP7 TORX PLUS DRIVE, DRIVER FOR INDEXABLE TOOLS
    £20.02 Price with VAT: £24.03 Buy Surplus As Low As £12.61 Price with VAT: £15.13
    £12.61 Price with VAT: £15.13
    KENNAMETAL 2248952

    KENNAMETAL

    2248952

    13/16" ID X 1-1/4" OD, 35.99MM HEAD DIAM, SLOTTED HYDRAULIC CHUCK SLEEVE STEEL, 59.99MM LENGTH UNDER HEAD, THROUGH COOLANT
    £211.35 Price with VAT: £253.62 Buy Surplus As Low As £126.81 Price with VAT: £152.17
    £126.81 Price with VAT: £152.17
    KENNAMETAL 2975402

    KENNAMETAL

    2975402

    TP9 TORX PLUS CAP SCREW FOR INDEXABLES INSERT COMPATIBLE, DT9IP KEY DRIVER
    £5.54 Price with VAT: £6.64 Buy Surplus As Low As £3.32 Price with VAT: £3.99
    £3.32 Price with VAT: £3.99
    KENNAMETAL 3964133

    KENNAMETAL

    3964133

    KM50TS MODULAR CONNECTION TAP CHUCK ADAPTER 50MM PROJECTION, SIZE 1 ADAPTER, QUICK CHANGE
    £987.79 Price with VAT: £1,185.35 Buy Surplus As Low As £593.27 Price with VAT: £711.92
    £593.27 Price with VAT: £711.92
    KENNAMETAL 3964134

    KENNAMETAL

    3964134

    KM50TS MODULAR CONNECTION TAP CHUCK ADAPTER 75MM PROJECTION, SIZE 2 ADAPTER, QUICK CHANGE
    £987.79 Price with VAT: £1,185.35 Buy Surplus As Low As £593.27 Price with VAT: £711.92
    £593.27 Price with VAT: £711.92
    KENNAMETAL SNMA643

    KENNAMETAL

    SNMA643

    INSERT, KCK20 CARBIDE TURNING INSERT, TICN/AL2O3 FINISH, 3/4" INSCRIBED CIRCLE, 3/64" CORNER RADIUS, 90 SQUARE, SERIES KENLOC, 3758154
    £65.26 Price with VAT: £78.31 Buy Surplus As Low As £39.30 Price with VAT: £47.16
    £39.30 Price with VAT: £47.16
    KENNAMETAL 3784066

    KENNAMETAL

    3784066

    SCREW FOR INDEXABLE TOOLS
    £13.35 Price with VAT: £16.02 Buy Surplus As Low As £8.16 Price with VAT: £9.79
    £8.16 Price with VAT: £9.79
    KENNAMETAL 3795029

    KENNAMETAL

    3795029

    1MM X 16MM KM50TS MODULAR CONNECTION ER25 COLLET CHUCK 50MM PROJECTION, THROUGH-SPINDLE COOLANT
    £499.09 Price with VAT: £598.90 Buy Surplus As Low As £299.60 Price with VAT: £359.52
    £299.60 Price with VAT: £359.52
    KENNAMETAL 5673343

    KENNAMETAL

    5673343

    TORX PLUS INSERT SCREW FOR INDEXABLES SHANK COMPATIBLE
    £7.31 Price with VAT: £8.77 Buy Surplus As Low As £4.39 Price with VAT: £5.26
    £4.39 Price with VAT: £5.26
    KENNAMETAL 6694046

    KENNAMETAL

    6694046

    2MM X 20MM HSK100A TAPER SHANK ER32 COLLET CHUCK 209.9MM OAL, 160MM PROJECTION
    £711.18 Price with VAT: £853.41 Buy Surplus As Low As £427.15 Price with VAT: £512.58
    £427.15 Price with VAT: £512.58
    KENNAMETAL 1017506

    KENNAMETAL

    1017506

    SERIES TG/PG 100 17.48MM SINGLE ANGLE PIPE TAP COLLET 1/2" TAP
    £100.86 Price with VAT: £121.03 Buy Surplus As Low As £60.81 Price with VAT: £72.97
    £60.81 Price with VAT: £72.97
    KENNAMETAL 1017269

    KENNAMETAL

    1017269

    SERIES TG/PG 75 0.318" SINGLE ANGLE HAND TAP COLLET 5/16" TAP
    £100.86 Price with VAT: £121.03 Buy Surplus As Low As £60.81 Price with VAT: £72.97
    £60.81 Price with VAT: £72.97
    KENNAMETAL 1017270

    KENNAMETAL

    1017270

    SERIES TG/PG 75 0.381" SINGLE ANGLE HAND TAP COLLET 3/8" TAP
    £100.86 Price with VAT: £121.03 Buy Surplus As Low As £60.81 Price with VAT: £72.97
    £60.81 Price with VAT: £72.97
    KENNAMETAL 1017388

    KENNAMETAL

    1017388

    SERIES TG/PG 100 6.48MM SINGLE ANGLE HAND TAP COLLET 1/4" TAP
    £100.86 Price with VAT: £121.03 Buy Surplus As Low As £60.81 Price with VAT: £72.97
    £60.81 Price with VAT: £72.97
    KENNAMETAL 1017505

    KENNAMETAL

    1017505

    SERIES TG/PG 100 17.78MM SINGLE ANGLE PIPE TAP COLLET 3/8" TAP
    £100.86 Price with VAT: £121.03 Buy Surplus As Low As £60.81 Price with VAT: £72.97
    £60.81 Price with VAT: £72.97
    KENNAMETAL 1020550

    KENNAMETAL

    1020550

    HEX SOCKET LOCK SCREW FOR INDEXABLES 1/4" SOCKET HEX
    £34.85 Price with VAT: £41.83 Buy Surplus As Low As £21.51 Price with VAT: £25.81
    £21.51 Price with VAT: £25.81
    KENNAMETAL 1020872

    KENNAMETAL

    1020872

    13 PIECE, 1 TO 7MM CAPACITY, ER11 ER COLLET SET INCREMENTS OF 0.5MM
    £467.94 Price with VAT: £561.53 Buy Surplus As Low As £281.06 Price with VAT: £337.27
    £281.06 Price with VAT: £337.27
    KENNAMETAL 1026400

    KENNAMETAL

    1026400

    SERIES ER16 4.27MM ER HAND TAP COLLET 5/32 & #8 TAP
    £129.78 Price with VAT: £155.73 Buy Surplus As Low As £77.87 Price with VAT: £93.44
    £77.87 Price with VAT: £93.44
    KENNAMETAL 1026449

    KENNAMETAL

    1026449

    SERIES ER25 9.68MM ER HAND TAP COLLET 3/8" TAP
    £140.16 Price with VAT: £168.19 Buy Surplus As Low As £84.54 Price with VAT: £101.45
    £84.54 Price with VAT: £101.45
    KENNAMETAL 1080543

    KENNAMETAL

    1080543

    TG/PG 100 8MM COOLANT SINGLE ANGLE COLLET 8MM TIR, 60.33MM OAL, 8MM OVERALL DIAM
    £128.29 Price with VAT: £153.95 Buy Surplus As Low As £77.12 Price with VAT: £92.55
    £77.12 Price with VAT: £92.55
    KENNAMETAL 1086425

    KENNAMETAL

    1086425

    0.51MM X 10.41MM HSK63 HOLLOW TAPER ER ER16 COLLET CHUCK 132MM OAL, 100MM PROJECTION, BALANCED TO 15,000 RPM, THROUGH-SPINDLE COOLANT
    £580.66 Price with VAT: £696.79 Buy Surplus As Low As £348.54 Price with VAT: £418.25
    £348.54 Price with VAT: £418.25
    KENNAMETAL 1129731

    KENNAMETAL

    1129731

    SERIES ER32 9MM ER HAND TAP COLLET M12 TAP
    £143.87 Price with VAT: £172.64 Buy Surplus As Low As £86.77 Price with VAT: £104.12
    £86.77 Price with VAT: £104.12
    KENNAMETAL 1105159

    KENNAMETAL

    1105159

    TG/PG 75 3/4" COOLANT SINGLE ANGLE COLLET 19.05MM TIR, 46.81MM OAL, 19.05MM OVERALL DIAM
    £127.55 Price with VAT: £153.06 Buy Surplus As Low As £77.12 Price with VAT: £92.55
    £77.12 Price with VAT: £92.55
    KENNAMETAL 1288285

    KENNAMETAL

    1288285

    0.51MM X 7.11MM STRAIGHT SHANK ER11 COLLET CHUCK 132MM OAL, 32MM PROJECTION, 0.0025MM TIR, BALANCED TO 8,000 RPM, THROUGH-SPINDLE COOLANT
    £255.10 Price with VAT: £306.13 Buy Surplus As Low As £153.51 Price with VAT: £184.21
    £153.51 Price with VAT: £184.21
    KENNAMETAL 1297414

    KENNAMETAL

    1297414

    2.5MM DA300 DA COLLET 1" OAL, 9.53MM OVERALL DIAM, 0.03MM TIR
    £40.05 Price with VAT: £48.05 Buy Surplus As Low As £24.47 Price with VAT: £29.37
    £24.47 Price with VAT: £29.37
    KENNAMETAL 2018679

    KENNAMETAL

    2018679

    INSERT SCREW FOR INDEXABLES: T8 TORX, (MOQ=1, PKG QTY=1)
    £10.38 Price with VAT: £12.46 Buy Surplus As Low As £6.23 Price with VAT: £7.48
    £6.23 Price with VAT: £7.48
    KENNAMETAL 2637154

    KENNAMETAL

    2637154

    HSK100, 3 TO 15.88MM CAPACITY, TAPERED MOUNT DRILL CHUCK KEYED, 52MM SLEEVE DIAM, 125MM OPEN LENGTH
    £1,702.67 Price with VAT: £2,043.21 Buy Surplus As Low As £1,021.90 Price with VAT: £1,226.28
    £1,021.90 Price with VAT: £1,226.28
    KENNAMETAL 2025074

    KENNAMETAL

    2025074

    TORX INSERT SCREW FOR INDEXABLES M4 THREAD
    £8.16 Price with VAT: £9.79 Buy Surplus As Low As £4.89 Price with VAT: £5.87
    £4.89 Price with VAT: £5.87
    KENNAMETAL 3587212

    KENNAMETAL

    3587212

    CAP SCREW FOR INDEXABLES 3MM SOCKET HEX, BUTTON HEAD, CARTRIDGE COMPATIBLE, SERIES MODBORE
    £20.02 Price with VAT: £24.03 Buy Surplus As Low As £12.61 Price with VAT: £15.13
    £12.61 Price with VAT: £15.13
    KENNAMETAL 2636741

    KENNAMETAL

    2636741

    TORX ANTI-ROTATION SCREW FOR INDEXABLES
    £13.35 Price with VAT: £16.02 Buy Surplus As Low As £8.16 Price with VAT: £9.79
    £8.16 Price with VAT: £9.79
    KENNAMETAL 5525688

    KENNAMETAL

    5525688

    100MM HSK100A TAPER SHANK DIAM TENSION & COMPRESSION TAPPING CHUCK M10 TO M20 TAP CAPACITY, 118.9MM PROJECTION, THROUGH COOLANT
    £2,289.27 Price with VAT: £2,747.12 Buy Surplus As Low As £1,374.15 Price with VAT: £1,648.98
    £1,374.15 Price with VAT: £1,648.98
    KENNAMETAL 6135417

    KENNAMETAL

    6135417

    ROTARY TOOL HOLDER TORQUE WRENCH INSERT COMPATIBLE WITH DL20 CONNECTION SIZE
    £148.32 Price with VAT: £177.98 Buy Surplus As Low As £88.99 Price with VAT: £106.79
    £88.99 Price with VAT: £106.79
    KENNAMETAL 1182973

    KENNAMETAL

    1182973

    TURNING INSERT, SPGF, 322
    Call for Availability
    Previous
    1 2 3 4 5 6 7 8 9 10