Product Search

    SEARCH NOW FOR ALL YOUR KENNAMETAL SOLUTIONS

    Radwell is here to supply you with all your plant floor needs.

    Radwell is not an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.

    Rockwell Disclaimer: The product is used surplus. Radwell is not an authorised surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorised dealers. Because Radwell is not an authorised distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Radwell makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Radwell also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Radwell also makes no representations as to your right to install any such firmware on the product. Radwell will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

    Filter Results
    Results 251-300 of 495.
    KENNAMETAL 1191842

    KENNAMETAL

    1191842

    SERIES KGSP, CM CLAMP FOR INDEXABLES
    £45.24 Price with VAT: £54.28 Buy Surplus As Low As £27.44 Price with VAT: £32.93
    £27.44 Price with VAT: £32.93
    KENNAMETAL 1191845

    KENNAMETAL

    1191845

    SERIES SEPARATOR, CM CLAMP FOR INDEXABLES RIGHT HAND CUT
    £52.65 Price with VAT: £63.18 Buy Surplus As Low As £31.89 Price with VAT: £38.27
    £31.89 Price with VAT: £38.27
    KENNAMETAL 1288963

    KENNAMETAL

    1288963

    17 PIECE, 1/4 TO 3/4" CAPACITY, DA180 DOUBLE ANGLE COLLET SET INCREMENTS OF 1/32"
    £402.68 Price with VAT: £483.22 Buy Surplus As Low As £241.76 Price with VAT: £290.11
    £241.76 Price with VAT: £290.11
    KENNAMETAL 1260380

    KENNAMETAL

    1260380

    SERIES SEPARATOR, CM CLAMP FOR INDEXABLES LEFT HAND CUT
    £55.62 Price with VAT: £66.74 Buy Surplus As Low As £33.37 Price with VAT: £40.05
    £33.37 Price with VAT: £40.05
    KENNAMETAL 1260385

    KENNAMETAL

    1260385

    SERIES KGSP, CM CLAMP FOR INDEXABLES
    £55.62 Price with VAT: £66.74 Buy Surplus As Low As £33.37 Price with VAT: £40.05
    £33.37 Price with VAT: £40.05
    KENNAMETAL 1261788

    KENNAMETAL

    1261788

    5/64" X 1" CAT50 TAPER SHANK SINGLE ANGLE TG/PG 100 COLLET CHUCK 7" OAL, 3" PROJECTION, BALANCED TO 12_000 RPM, THROUGH-SPINDLE & DIN FLANGE COOLANT
    £255.85 Price with VAT: £307.02 Buy Surplus As Low As £153.51 Price with VAT: £184.21
    £153.51 Price with VAT: £184.21
    KENNAMETAL 1289027

    KENNAMETAL

    1289027

    9 PIECE, 1/8 TO 1/4" CAPACITY, DA300 DOUBLE ANGLE COLLET SET INCREMENTS OF 1/64"
    £179.46 Price with VAT: £215.36 Buy Surplus As Low As £108.27 Price with VAT: £129.93
    £108.27 Price with VAT: £129.93
    KENNAMETAL 1288925

    KENNAMETAL

    1288925

    21 PIECE, 1/4 TO 9/16" CAPACITY, DA100 DOUBLE ANGLE COLLET SET INCREMENTS OF 1/64"
    £384.88 Price with VAT: £461.86 Buy Surplus As Low As £231.37 Price with VAT: £277.65
    £231.37 Price with VAT: £277.65
    KENNAMETAL 1288964

    KENNAMETAL

    1288964

    33 PIECE, 1/4 TO 3/4" CAPACITY, DA180 DOUBLE ANGLE COLLET SET INCREMENTS OF 1/64"
    £783.85 Price with VAT: £940.62 Buy Surplus As Low As £470.91 Price with VAT: £565.09
    £470.91 Price with VAT: £565.09
    KENNAMETAL 1860639

    KENNAMETAL

    1860639

    SERIES A2, CLAMP FOR INDEXABLES, (MOQ=1, PKG QTY=1)
    £157.22 Price with VAT: £188.66 Buy Surplus As Low As £94.92 Price with VAT: £113.91
    £94.92 Price with VAT: £113.91
    KENNAMETAL 4109625

    KENNAMETAL

    4109625

    NA3L4 KCU25 CARBIDE THREADING INSERT ALTIN FINISH, INTERNAL/EXTERNAL, ACME, 4 TPI, SERIES TOP NOTCH
    £35.60 Price with VAT: £42.72 Buy Surplus As Low As £21.51 Price with VAT: £25.81
    £21.51 Price with VAT: £25.81
    KENNAMETAL 6693876

    KENNAMETAL

    6693876

    1MM X 13MM CV40 TAPER SHANK ER ER20 COLLET CHUCK 169.85MM OAL, 4" PROJECTION
    £230.63 Price with VAT: £276.76 Buy Surplus As Low As £138.68 Price with VAT: £166.41
    £138.68 Price with VAT: £166.41
    KENNAMETAL 5998757

    KENNAMETAL

    5998757

    1" ID X 1-1/4" OD, 36MM HEAD DIAM, SLOTTED HYDRAULIC CHUCK SLEEVE STEEL, 70MM LENGTH UNDER HEAD, THROUGH COOLANT
    £556.93 Price with VAT: £668.31 Buy Surplus As Low As £334.45 Price with VAT: £401.34
    £334.45 Price with VAT: £401.34
    KENNAMETAL 1261620

    KENNAMETAL

    1261620

    1/32" X 13.5MM CAT40 TAPER SHANK SINGLE ANGLE TG/PG 50 COLLET CHUCK 7.687" OAL, 127MM PROJECTION, BALANCED TO 12_000 RPM, THROUGH-SPINDLE & DIN FLANGE COOLANT
    £301.82 Price with VAT: £362.19 Buy Surplus As Low As £181.69 Price with VAT: £218.03
    £181.69 Price with VAT: £218.03
    KENNAMETAL 1260395

    KENNAMETAL

    1260395

    SERIES SEPARATOR, CM CLAMP FOR INDEXABLES LEFT HAND CUT
    £51.91 Price with VAT: £62.29 Buy Surplus As Low As £31.15 Price with VAT: £37.38
    £31.15 Price with VAT: £37.38
    KENNAMETAL 1261622

    KENNAMETAL

    1261622

    3/64" X 3/4" CAT40 TAPER SHANK SINGLE ANGLE TG/PG 75 COLLET CHUCK 8.687" OAL, 6" PROJECTION, BALANCED TO 12_000 RPM, THROUGH-SPINDLE & DIN FLANGE COOLANT
    £318.88 Price with VAT: £382.66 Buy Surplus As Low As £191.33 Price with VAT: £229.59
    £191.33 Price with VAT: £229.59
    KENNAMETAL 1261789

    KENNAMETAL

    1261789

    5/64" X 1" CAT50 TAPER SHANK SINGLE ANGLE TG/PG 100 COLLET CHUCK 11-1/2" OAL, 7-1/2" PROJECTION, BALANCED TO 12_000 RPM, THROUGH-SPINDLE & DIN FLANGE COOLANT
    £373.02 Price with VAT: £447.62 Buy Surplus As Low As £223.96 Price with VAT: £268.75
    £223.96 Price with VAT: £268.75
    KENNAMETAL 1288984

    KENNAMETAL

    1288984

    17 PIECE, 1/8 TO 3/8" CAPACITY, DA200 DOUBLE ANGLE COLLET SET INCREMENTS OF 1/64"
    £293.67 Price with VAT: £352.40 Buy Surplus As Low As £176.50 Price with VAT: £211.80
    £176.50 Price with VAT: £211.80
    KENNAMETAL 1930183

    KENNAMETAL

    1930183

    WRENCH FOR INDEXABLE MILLING & TURNING, (MOQ=1, PKG QTY=1)
    £515.40 Price with VAT: £618.48 Buy Surplus As Low As £309.24 Price with VAT: £371.09
    £309.24 Price with VAT: £371.09
    KENNAMETAL 2637760

    KENNAMETAL

    2637760

    TP20 TORX PLUS CAP SCREW FOR INDEXABLES CLAMP OR INSERT COMPATIBLE, KM3225 TOOLHOLDER
    £8.16 Price with VAT: £9.79 Buy Surplus As Low As £4.89 Price with VAT: £5.87
    £4.89 Price with VAT: £5.87
    KENNAMETAL 4109630

    KENNAMETAL

    4109630

    NA3R4 KCU25 CARBIDE THREADING INSERT ALTIN FINISH, INTERNAL/EXTERNAL, ACME, 4 TPI, SERIES TOP NOTCH
    £35.60 Price with VAT: £42.72 Buy Surplus As Low As £21.51 Price with VAT: £25.81
    £21.51 Price with VAT: £25.81
    KENNAMETAL 4111097

    KENNAMETAL

    4111097

    A2030N00CF02-KCU25 CARBIDE CUTOFF INSERT ALTIN FINISH, 0° NEUTRAL LEAD ANGLE, NEUTRAL INSERT, 3MM CUTTING WIDTH, 0.008" CORNER RADIUS, SERIES A2
    £31.89 Price with VAT: £38.27 Buy Surplus As Low As £19.28 Price with VAT: £23.14
    £19.28 Price with VAT: £23.14
    KENNAMETAL 5667302

    KENNAMETAL

    5667302

    SCREW FOR INDEXABLES INSERT COMPATIBLE
    £8.16 Price with VAT: £9.79 Buy Surplus As Low As £4.89 Price with VAT: £5.87
    £4.89 Price with VAT: £5.87
    KENNAMETAL 5608748

    KENNAMETAL

    5608748

    #10-24 UNC 2 FLUTE H3 OXIDE FINISH HIGH SPEED STEEL SPIRAL POINT EXTENSION TAP PLUG CHAMFER, 6" OAL, SERIES T820
    £51.91 Price with VAT: £62.29 Buy Surplus As Low As £31.15 Price with VAT: £37.38
    £31.15 Price with VAT: £37.38
    KENNAMETAL CV40TG075600

    KENNAMETAL

    CV40TG075600

    COLLET CHUCK TOOL HOLDER
    £67.41 Price with VAT: £80.89 Buy Surplus As Low As £41.19 Price with VAT: £49.43
    £41.19 Price with VAT: £49.43
    KENNAMETAL 1013777

    KENNAMETAL

    1013777

    TG/PG 75 13/64" STANDARD SINGLE ANGLE COLLET 5.156MM TIR, 46.81MM OAL, 5.16MM OVERALL DIAM
    £52.65 Price with VAT: £63.18 Buy Surplus As Low As £31.89 Price with VAT: £38.27
    £31.89 Price with VAT: £38.27
    KENNAMETAL 1013940

    KENNAMETAL

    1013940

    TG/PG 75 9/16" STANDARD SINGLE ANGLE COLLET 14.275MM TIR, 46.81MM OAL, 14.28MM OVERALL DIAM
    £44.50 Price with VAT: £53.39 Buy Surplus As Low As £26.70 Price with VAT: £32.04
    £26.70 Price with VAT: £32.04
    KENNAMETAL 1014220

    KENNAMETAL

    1014220

    6MM DA200 DA COLLET 30.18MM OAL, 13.69MM OVERALL DIAM, 0.03MM TIR
    £25.96 Price with VAT: £31.15 Buy Surplus As Low As £15.57 Price with VAT: £18.69
    £15.57 Price with VAT: £18.69
    KENNAMETAL 1014249

    KENNAMETAL

    1014249

    3.5MM DA300 DA COLLET 1" OAL, 9.53MM OVERALL DIAM, 0.03MM TIR
    £25.96 Price with VAT: £31.15 Buy Surplus As Low As £15.57 Price with VAT: £18.69
    £15.57 Price with VAT: £18.69
    KENNAMETAL 1013693

    KENNAMETAL

    1013693

    TG/PG 75 5/16" STANDARD SINGLE ANGLE COLLET 7.925MM TIR, 46.81MM OAL, 7.92MM OVERALL DIAM
    £44.50 Price with VAT: £53.39 Buy Surplus As Low As £26.70 Price with VAT: £32.04
    £26.70 Price with VAT: £32.04
    KENNAMETAL 1013745

    KENNAMETAL

    1013745

    TG/PG 75 1/8" STANDARD SINGLE ANGLE COLLET 3.175MM TIR, 46.81MM OAL, 3.17MM OVERALL DIAM
    £52.65 Price with VAT: £63.18 Buy Surplus As Low As £31.89 Price with VAT: £38.27
    £31.89 Price with VAT: £38.27
    KENNAMETAL 1013795

    KENNAMETAL

    1013795

    TG/PG 100 1/4" STANDARD SINGLE ANGLE COLLET 6.35MM TIR, 60.33MM OAL, 6.35MM OVERALL DIAM
    £86.02 Price with VAT: £103.23 Buy Surplus As Low As £51.91 Price with VAT: £62.29
    £51.91 Price with VAT: £62.29
    KENNAMETAL 1013856

    KENNAMETAL

    1013856

    TG/PG 100 3/8" STANDARD SINGLE ANGLE COLLET 9.525MM TIR, 60.33MM OAL, 9.53MM OVERALL DIAM
    £54.14 Price with VAT: £64.96 Buy Surplus As Low As £32.63 Price with VAT: £39.16
    £32.63 Price with VAT: £39.16
    KENNAMETAL 1013875

    KENNAMETAL

    1013875

    TG/PG 75 27/64" STANDARD SINGLE ANGLE COLLET 10.719MM TIR, 46.81MM OAL, 10.72MM OVERALL DIAM
    £44.50 Price with VAT: £53.39 Buy Surplus As Low As £26.70 Price with VAT: £32.04
    £26.70 Price with VAT: £32.04
    KENNAMETAL 1013980

    KENNAMETAL

    1013980

    TG/PG 75 5/8" STANDARD SINGLE ANGLE COLLET 15.875MM TIR, 46.81MM OAL, 15.88MM OVERALL DIAM
    £44.50 Price with VAT: £53.39 Buy Surplus As Low As £26.70 Price with VAT: £32.04
    £26.70 Price with VAT: £32.04
    KENNAMETAL 1014053

    KENNAMETAL

    1014053

    TG/PG 100 7/8" STANDARD SINGLE ANGLE COLLET 22.225MM TIR, 60.33MM OAL, 22.23MM OVERALL DIAM
    £54.14 Price with VAT: £64.96 Buy Surplus As Low As £32.63 Price with VAT: £39.16
    £32.63 Price with VAT: £39.16
    KENNAMETAL 1014106

    KENNAMETAL

    1014106

    TG/PG 150 1" STANDARD SINGLE ANGLE COLLET 25.4MM TIR, 76.2MM OAL, 25.4MM OVERALL DIAM
    £78.61 Price with VAT: £94.33 Buy Surplus As Low As £47.46 Price with VAT: £56.95
    £47.46 Price with VAT: £56.95
    KENNAMETAL 1014218

    KENNAMETAL

    1014218

    5MM DA200 DA COLLET 30.18MM OAL, 13.69MM OVERALL DIAM, 0.03MM TIR
    £25.96 Price with VAT: £31.15 Buy Surplus As Low As £15.57 Price with VAT: £18.69
    £15.57 Price with VAT: £18.69
    KENNAMETAL 1013799

    KENNAMETAL

    1013799

    TG/PG 75 9/32" STANDARD SINGLE ANGLE COLLET 7.137MM TIR, 46.81MM OAL, 7.14MM OVERALL DIAM
    £44.50 Price with VAT: £53.39 Buy Surplus As Low As £26.70 Price with VAT: £32.04
    £26.70 Price with VAT: £32.04
    KENNAMETAL 1013859

    KENNAMETAL

    1013859

    TG/PG 75 25/64" STANDARD SINGLE ANGLE COLLET 9.931MM TIR, 46.81MM OAL, 9.93MM OVERALL DIAM
    £44.50 Price with VAT: £53.39 Buy Surplus As Low As £26.70 Price with VAT: £32.04
    £26.70 Price with VAT: £32.04
    KENNAMETAL 1014223

    KENNAMETAL

    1014223

    7.5MM DA200 DA COLLET 30.18MM OAL, 13.69MM OVERALL DIAM, 0.03MM TIR
    £29.66 Price with VAT: £35.60 Buy Surplus As Low As £17.80 Price with VAT: £21.36
    £17.80 Price with VAT: £21.36
    KENNAMETAL 1014245

    KENNAMETAL

    1014245

    8.5MM DA200 DA COLLET 30.18MM OAL, 13.69MM OVERALL DIAM, 0.03MM TIR
    £29.66 Price with VAT: £35.60 Buy Surplus As Low As £17.80 Price with VAT: £21.36
    £17.80 Price with VAT: £21.36
    KENNAMETAL 1014248

    KENNAMETAL

    1014248

    10MM DA200 DA COLLET 30.18MM OAL, 13.69MM OVERALL DIAM, 0.03MM TIR
    £25.96 Price with VAT: £31.15 Buy Surplus As Low As £15.57 Price with VAT: £18.69
    £15.57 Price with VAT: £18.69
    KENNAMETAL 1014477

    KENNAMETAL

    1014477

    9MM DA180 DA COLLET 41.28MM OAL, 26.29MM OVERALL DIAM, 0.03MM TIR
    £34.11 Price with VAT: £40.94 Buy Surplus As Low As £20.76 Price with VAT: £24.92
    £20.76 Price with VAT: £24.92
    KENNAMETAL 1014253

    KENNAMETAL

    1014253

    5.5MM DA300 DA COLLET 1" OAL, 9.53MM OVERALL DIAM, 0.03MM TIR
    £25.96 Price with VAT: £31.15 Buy Surplus As Low As £15.57 Price with VAT: £18.69
    £15.57 Price with VAT: £18.69
    KENNAMETAL 1014435

    KENNAMETAL

    1014435

    10MM DA180 DA COLLET 41.28MM OAL, 26.29MM OVERALL DIAM, 0.03MM TIR
    £34.11 Price with VAT: £40.94 Buy Surplus As Low As £20.76 Price with VAT: £24.92
    £20.76 Price with VAT: £24.92
    KENNAMETAL 1014578

    KENNAMETAL

    1014578

    7/64" DA300 DA COLLET 1" OAL, 9.53MM OVERALL DIAM, 0.03MM TIR
    £40.05 Price with VAT: £48.05 Buy Surplus As Low As £24.47 Price with VAT: £29.37
    £24.47 Price with VAT: £29.37
    KENNAMETAL 1014610

    KENNAMETAL

    1014610

    5/32" DA200 DA COLLET 30.18MM OAL, 13.69MM OVERALL DIAM, 0.03MM TIR
    £25.96 Price with VAT: £31.15 Buy Surplus As Low As £15.57 Price with VAT: £18.69
    £15.57 Price with VAT: £18.69
    KENNAMETAL 1014647

    KENNAMETAL

    1014647

    3/16" DA180 DA COLLET 41.28MM OAL, 26.29MM OVERALL DIAM, 0.03MM TIR
    £59.33 Price with VAT: £71.19 Buy Surplus As Low As £35.60 Price with VAT: £42.72
    £35.60 Price with VAT: £42.72
    KENNAMETAL 1013862

    KENNAMETAL

    1013862

    TG/PG 75 13/32" STANDARD SINGLE ANGLE COLLET 10.312MM TIR, 46.81MM OAL, 10.31MM OVERALL DIAM
    £44.50 Price with VAT: £53.39 Buy Surplus As Low As £26.70 Price with VAT: £32.04
    £26.70 Price with VAT: £32.04
    Previous Next
    1 2 3 4 5 6 7 8 9 10