Product Search

    SEARCH NOW FOR ALL YOUR KENNAMETAL SOLUTIONS

    Radwell is here to supply you with all your plant floor needs.

    Radwell is not an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.

    Rockwell Disclaimer: The product is used surplus. Radwell is not an authorised surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorised dealers. Because Radwell is not an authorised distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Radwell makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Radwell also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Radwell also makes no representations as to your right to install any such firmware on the product. Radwell will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

    Filter Results
    Results 451-500 of 495.
    KENNAMETAL 1-221-1008

    KENNAMETAL

    HERTEL

    1-221-1008

    MANUAL LATHE CHUCKS; CHUCK TYPE: SELF-CENTERING ; NOMINAL CHUCK SIZE: 10 ; NUMBER OF JAWS: 3 ; MOUNT: D1-8 ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 2.9921 ; BODY MATERIAL: CAST IRON (SEMI-STE ...
    £1,363.77 Price with VAT: £1,636.53 Buy Surplus As Low As £818.71 Price with VAT: £982.45
    £818.71 Price with VAT: £982.45
    KENNAMETAL 1-103-0800

    KENNAMETAL

    HERTEL

    1-103-0800

    MANUAL LATHE CHUCKS; CHUCK TYPE: SELF-CENTERING ; NOMINAL CHUCK SIZE: 8IN ; NUMBER OF JAWS: 6 ; MOUNT: PLAIN BACK ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 2.1654 ; BODY MATERIAL: FORGED STEEL ...
    £1,390.47 Price with VAT: £1,668.56 Buy Surplus As Low As £834.28 Price with VAT: £1,001.14
    £834.28 Price with VAT: £1,001.14
    KENNAMETAL 3.76063R032V

    KENNAMETAL

    3.76063R032V

    DRILL HEAD, INDEXABLE, HTS, ADJUSTABLE, WITH DFT, 63-68 MM DRILLING RANGE
    £1,422.25 Price with VAT: £1,706.70 Buy Surplus As Low As £837.38 Price with VAT: £1,004.86
    £837.38 Price with VAT: £1,004.86
    KENNAMETAL 1-322-1004

    KENNAMETAL

    HERTEL

    1-322-1004

    MANUAL LATHE CHUCKS; CHUCK TYPE: INDEPENDENT ; NOMINAL CHUCK SIZE: 10 ; NUMBER OF JAWS: 4 ; MOUNT: D1-4 ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 2.2360 ; BODY MATERIAL: CAST IRON (SEMI-STEEL) ...
    £1,452.76 Price with VAT: £1,743.31 Buy Surplus As Low As £872.10 Price with VAT: £1,046.52
    £872.10 Price with VAT: £1,046.52
    KENNAMETAL 1-221-0804

    KENNAMETAL

    HERTEL

    1-221-0804

    MANUAL LATHE CHUCKS; CHUCK TYPE: SELF-CENTERING ; NOMINAL CHUCK SIZE: 8 ; NUMBER OF JAWS: 3 ; MOUNT: D1-4 ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 2.1654 ; BODY MATERIAL: CAST IRON (SEMI-STEE ...
    £1,476.49 Price with VAT: £1,771.79 Buy Surplus As Low As £886.19 Price with VAT: £1,063.43
    £886.19 Price with VAT: £1,063.43
    KENNAMETAL 1-312-1006

    KENNAMETAL

    HERTEL

    1-312-1006

    MANUAL LATHE CHUCKS; CHUCK TYPE: INDEPENDENT ; NOMINAL CHUCK SIZE: 10 ; NUMBER OF JAWS: 4 ; MOUNT: A2-6 ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 2.5590 ; BODY MATERIAL: CAST IRON (SEMI-STEEL) ...
    £1,529.89 Price with VAT: £1,835.86 Buy Surplus As Low As £918.08 Price with VAT: £1,101.70
    £918.08 Price with VAT: £1,101.70
    KENNAMETAL 2637154

    KENNAMETAL

    2637154

    HSK100, 3 TO 15.88MM CAPACITY, TAPERED MOUNT DRILL CHUCK KEYED, 52MM SLEEVE DIAM, 125MM OPEN LENGTH
    £1,702.67 Price with VAT: £2,043.21 Buy Surplus As Low As £1,021.90 Price with VAT: £1,226.28
    £1,021.90 Price with VAT: £1,226.28
    KENNAMETAL 1-322-1208

    KENNAMETAL

    HERTEL

    1-322-1208

    MANUAL LATHE CHUCKS; CHUCK TYPE: INDEPENDENT ; NOMINAL CHUCK SIZE: 12 ; NUMBER OF JAWS: 4 ; MOUNT: D1-8 ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 3.1500 ; BODY MATERIAL: CAST IRON (SEMI-STEEL)
    £1,797.60 Price with VAT: £2,157.12 Buy Surplus As Low As £1,079.00 Price with VAT: £1,294.80
    £1,079.00 Price with VAT: £1,294.80
    KENNAMETAL KSHR600HN5345C8

    KENNAMETAL

    KSHR600HN5345C8

    SHELL MILL, 6INCH, 45DEG,
    ✓ IN STOCK!
    £1,865.88 Price with VAT: £2,239.06 Buy Surplus As Low As £618.94 Price with VAT: £742.73
    £618.94 Price with VAT: £742.73
    KENNAMETAL 1-322-1206

    KENNAMETAL

    HERTEL

    1-322-1206

    MANUAL LATHE CHUCKS; CHUCK TYPE: INDEPENDENT ; NOMINAL CHUCK SIZE: 12 ; NUMBER OF JAWS: 4 ; MOUNT: D1-6 ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 3.1500 ; BODY MATERIAL: CAST IRON (SEMI-STEEL) ...
    £2,039.35 Price with VAT: £2,447.22 Buy Surplus As Low As £1,223.61 Price with VAT: £1,468.33
    £1,223.61 Price with VAT: £1,468.33
    KENNAMETAL 1-203-1200

    KENNAMETAL

    HERTEL

    1-203-1200

    MANUAL LATHE CHUCKS; CHUCK TYPE: SELF-CENTERING ; NOMINAL CHUCK SIZE: 12 ; NUMBER OF JAWS: 4 ; MOUNT: PLAIN BACK ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 4.0551 ; BODY MATERIAL: CAST IRON (SE ...
    £2,101.65 Price with VAT: £2,521.98 Buy Surplus As Low As £1,261.43 Price with VAT: £1,513.72
    £1,261.43 Price with VAT: £1,513.72
    KENNAMETAL 5525688

    KENNAMETAL

    5525688

    100MM HSK100A TAPER SHANK DIAM TENSION & COMPRESSION TAPPING CHUCK M10 TO M20 TAP CAPACITY, 118.9MM PROJECTION, THROUGH COOLANT
    £2,289.27 Price with VAT: £2,747.12 Buy Surplus As Low As £1,374.15 Price with VAT: £1,648.98
    £1,374.15 Price with VAT: £1,648.98
    KENNAMETAL 1-103-1200

    KENNAMETAL

    HERTEL

    1-103-1200

    MANUAL LATHE CHUCKS; CHUCK TYPE: SELF-CENTERING ; NOMINAL CHUCK SIZE: 12IN ; NUMBER OF JAWS: 6 ; MATERIAL: FORGED STEEL ; MOUNT: PLAIN BACK ; THROUGH-HOLE DIAMETER: 4.0551IN1-103-1200
    £3,133.19 Price with VAT: £3,759.83 Buy Surplus As Low As £1,879.91 Price with VAT: £2,255.90
    £1,879.91 Price with VAT: £2,255.90
    KENNAMETAL 4.81501R631/241-EACH

    KENNAMETAL

    4.81501R631/241-EACH

    CARBONE INSERT .625DECIMALS BLACK ( PACK OF 10 )
    ✓ IN STOCK!
    Buy Surplus As Low As £0.55 Price with VAT: £0.66
    £0.55 Price with VAT: £0.66
    KENNAMETAL BT1872779

    KENNAMETAL

    BT1872779

    TOOL HOLDER TURN/TURN BROACH CARTRIDGE
    ✓ IN STOCK!
    Buy Surplus As Low As £20.45 Price with VAT: £24.53
    £20.45 Price with VAT: £24.53
    KENNAMETAL CTGNL-123

    KENNAMETAL

    CTGNL-123

    TOOL HOLDER NEGATIVE INSERT 3/4X3/4X1.00INCH
    ✓ IN STOCK!
    Buy Surplus As Low As £83.90 Price with VAT: £100.68
    £83.90 Price with VAT: £100.68
    KENNAMETAL G042S-A1-0466/50

    KENNAMETAL

    G042S-A1-0466/50

    TOOL HOLDER BORING ASSEMBLY
    ✓ IN STOCK!
    Buy Surplus As Low As £79.64 Price with VAT: £95.57
    £79.64 Price with VAT: £95.57
    KENNAMETAL 6323-3071

    KENNAMETAL

    6323-3071

    TOOL HOLDER
    ✓ IN STOCK!
    Buy Surplus As Low As £283.99 Price with VAT: £340.79
    £283.99 Price with VAT: £340.79
    KENNAMETAL 9ZE5145D2/RT

    KENNAMETAL

    9ZE5145D2/RT

    DISCONTINUED BY MANUFACTURER, CUTTING INSERT, CARBIDE, PCD, DIAMOND TIP, (PRICE/EACH)
    ✓ IN STOCK!
    Buy Surplus As Low As £82.83 Price with VAT: £99.39
    £82.83 Price with VAT: £99.39
    KENNAMETAL KGSPR20UD

    KENNAMETAL

    KGSPR20UD

    DISCONTINUED BY MANUFACTURER, TOOL HOLDER
    ✓ IN STOCK!
    Buy Surplus As Low As £138.73 Price with VAT: £166.47
    £138.73 Price with VAT: £166.47
    KENNAMETAL CV50SM075350

    KENNAMETAL

    CV50SM075350

    DISCONTINUED BY MANUFACTURER, SHELL MILL TOOL HOLDER, 3/4 IN PILOT, 3.5 IN PROJECTION
    ✓ IN STOCK!
    Buy Surplus As Low As £74.01 Price with VAT: £88.81
    £74.01 Price with VAT: £88.81
    KENNAMETAL CP1638507

    KENNAMETAL

    CP1638507

    DISCONTINUED BY MANUFACTURER, COUNTERSINKING TOOL
    ✓ IN STOCK!
    Buy Surplus As Low As £83.82 Price with VAT: £100.59
    £83.82 Price with VAT: £100.59
    KENNAMETAL MSKNR12CA4C

    KENNAMETAL

    MSKNR12CA4C

    DISCONTINUED BY MANUFACTURER, CARTRIDGE INSERT / HOLDER
    ✓ IN STOCK!
    Buy Surplus As Low As £10.80 Price with VAT: £12.97
    £10.80 Price with VAT: £12.97
    KENNAMETAL KU-1420C

    KENNAMETAL

    KU-1420C

    DISCONTINUED BY MANUFACTURER, CUTTING / INSERT HOLDER
    ✓ IN STOCK!
    Buy Surplus As Low As £14.30 Price with VAT: £17.16
    £14.30 Price with VAT: £17.16
    KENNAMETAL KU-3040

    KENNAMETAL

    KU-3040

    DISCONTINUED BY MANUFACTURER, INSERT, KENDEX
    ✓ IN STOCK!
    Buy Surplus As Low As £12.46 Price with VAT: £14.95
    £12.46 Price with VAT: £14.95
    KENNAMETAL CBT60

    KENNAMETAL

    CBT60

    TRIANGLE SHIM INDEXABLE TOOLING SPARE PART
    Buy Surplus As Low As £5.34 Price with VAT: £6.41
    £5.34 Price with VAT: £6.41
    KENNAMETAL MS1200

    KENNAMETAL

    MS1200

    CLAMP SCREW PRICE/EACH
    Buy Surplus As Low As £0.22 Price with VAT: £0.27
    £0.22 Price with VAT: £0.27
    KENNAMETAL CPGM-32.52/KC850

    KENNAMETAL

    CPGM-32.52/KC850

    INSERT FOR CUTTING TOOL
    Buy Surplus As Low As £7.12 Price with VAT: £8.54
    £7.12 Price with VAT: £8.54
    KENNAMETAL CNMG544K

    KENNAMETAL

    CNMG544K

    CARBIDE INSERTS 5 PACK
    Buy Surplus As Low As £37.82 Price with VAT: £45.38
    £37.82 Price with VAT: £45.38
    KENNAMETAL 4.81501R631-EACH

    KENNAMETAL

    4.81501R631-EACH

    CARBIDE INSERT .625DECIMALS EACH
    Buy Surplus As Low As £0.80 Price with VAT: £0.96
    £0.80 Price with VAT: £0.96
    KENNAMETAL WB-62498

    KENNAMETAL

    WB-62498

    TOOL HOLDER
    Buy Surplus As Low As £44.50 Price with VAT: £53.39
    £44.50 Price with VAT: £53.39
    KENNAMETAL MTWL-103

    KENNAMETAL

    MTWL-103

    TURNING TOOL HOLDER
    Buy Surplus As Low As £33.37 Price with VAT: £40.05
    £33.37 Price with VAT: £40.05
    KENNAMETAL MVJNR-123B

    KENNAMETAL

    MVJNR-123B

    TOOL HOLDER INSERT L1/4.50 L2/1.66 RIGHT HAND
    Buy Surplus As Low As £77.87 Price with VAT: £93.44
    £77.87 Price with VAT: £93.44
    KENNAMETAL CCLPR12CA4

    KENNAMETAL

    CCLPR12CA4

    INDEXABLE TURNING CARTRIDGE
    Buy Surplus As Low As £60.07 Price with VAT: £72.08
    £60.07 Price with VAT: £72.08
    KENNAMETAL 60095481R00

    KENNAMETAL

    60095481R00

    KENNEMETAL,60095481R00, BORE TOOL, 31.75 DIA C
    Buy Surplus As Low As £44.50 Price with VAT: £53.39
    £44.50 Price with VAT: £53.39
    KENNAMETAL C114385R01

    KENNAMETAL

    C114385R01

    CARBIDE TURNING INSERT
    Buy Surplus As Low As £889.90 Price with VAT: £1,067.88
    £889.90 Price with VAT: £1,067.88
    KENNAMETAL 4144191

    KENNAMETAL

    4144191

    KENNAMETAL, 4144191, BALL NOSE ENDMILL, MP 230 01 16 KCAL B1RG02
    Buy Surplus As Low As £55.62 Price with VAT: £66.74
    £55.62 Price with VAT: £66.74
    KENNAMETAL CTCPL-163C

    KENNAMETAL

    CTCPL-163C

    TOOL HOLDER LH TP.322 1/16HEX
    Buy Surplus As Low As £66.74 Price with VAT: £80.09
    £66.74 Price with VAT: £80.09
    KENNAMETAL 200DA0375

    KENNAMETAL

    200DA0375

    DISCONTINUED BY MANUFACTURER, COLLET, 3/8 INCH, DOUBLE ANGLE
    Buy Surplus As Low As £17.75 Price with VAT: £21.30
    £17.75 Price with VAT: £21.30
    KENNAMETAL 200DA0250

    KENNAMETAL

    200DA0250

    DISCONTINUED BY MANUFACTURER, COLLET 1/4INCH DOUBLE ANGLE
    Buy Surplus As Low As £9.64 Price with VAT: £11.57
    £9.64 Price with VAT: £11.57
    KENNAMETAL 112316332D3CV

    KENNAMETAL

    112316332D3CV

    TOOL HOLDER, 4000RPM
    Buy Surplus As Low As £1,201.36 Price with VAT: £1,441.64
    £1,201.36 Price with VAT: £1,441.64
    KENNAMETAL 6316-2592CHGC

    KENNAMETAL

    6316-2592CHGC

    KENNAMETAL, 6316-2592CHGC, 63162592CHGC, 1083570, INDEXABLE TURNING TOOLHOLDER
    Buy Surplus As Low As £73.42 Price with VAT: £88.10
    £73.42 Price with VAT: £88.10
    KENNAMETAL JI33DA188334

    KENNAMETAL

    JI33DA188334

    DISCONTINUED BY MANUFACTURER, COLLET CHUCK EXTENSION, DOUBLE ANGLE, 3.25 INCH
    Buy Surplus As Low As £34.45 Price with VAT: £41.34
    £34.45 Price with VAT: £41.34
    KENNAMETAL 9ZE-6915D1/RT

    KENNAMETAL

    9ZE-6915D1/RT

    DISCONTINUED BY MANUFACTURER, MILLING CARTRIDGE, L-SHAPE, SINGLE MOUNT
    Buy Surplus As Low As £33.37 Price with VAT: £40.05
    £33.37 Price with VAT: £40.05
    KENNAMETAL 1182973

    KENNAMETAL

    1182973

    TURNING INSERT, SPGF, 322
    Call for Availability
    Previous
    1 2 3 4 5 6 7 8 9 10