Product Search

    SEARCH NOW FOR ALL YOUR KENNAMETAL SOLUTIONS

    Radwell is here to supply you with all your plant floor needs.

    Radwell is not an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.

    Rockwell Disclaimer: The product is used surplus. Radwell is not an authorised surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorised dealers. Because Radwell is not an authorised distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Radwell makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Radwell also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Radwell also makes no representations as to your right to install any such firmware on the product. Radwell will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

    Filter Results
    Results 251-300 of 495.
    KENNAMETAL 1014053

    KENNAMETAL

    1014053

    TG/PG 100 7/8" STANDARD SINGLE ANGLE COLLET 22.225MM TIR, 60.33MM OAL, 22.23MM OVERALL DIAM
    £54.14 Price with VAT: £64.96 Buy Surplus As Low As £32.63 Price with VAT: £39.16
    £32.63 Price with VAT: £39.16
    KENNAMETAL 1013856

    KENNAMETAL

    1013856

    TG/PG 100 3/8" STANDARD SINGLE ANGLE COLLET 9.525MM TIR, 60.33MM OAL, 9.53MM OVERALL DIAM
    £54.14 Price with VAT: £64.96 Buy Surplus As Low As £32.63 Price with VAT: £39.16
    £32.63 Price with VAT: £39.16
    KENNAMETAL 1085780

    KENNAMETAL

    1085780

    SERIES KGSP, CM CLAMP FOR INDEXABLES
    £54.14 Price with VAT: £64.96 Buy Surplus As Low As £32.63 Price with VAT: £39.16
    £32.63 Price with VAT: £39.16
    KENNAMETAL 1014749

    KENNAMETAL

    1014749

    TG/PG 100 18MM STANDARD SINGLE ANGLE COLLET 18MM TIR, 60.33MM OAL, 18MM OVERALL DIAM
    £54.14 Price with VAT: £64.96 Buy Surplus As Low As £32.63 Price with VAT: £39.16
    £32.63 Price with VAT: £39.16
    KENNAMETAL 1014703

    KENNAMETAL

    1014703

    TG/PG 100 10MM STANDARD SINGLE ANGLE COLLET 10MM TIR, 60.33MM OAL, 10MM OVERALL DIAM
    £54.14 Price with VAT: £64.96 Buy Surplus As Low As £32.63 Price with VAT: £39.16
    £32.63 Price with VAT: £39.16
    KENNAMETAL 1014753

    KENNAMETAL

    1014753

    TG/PG 100 20MM STANDARD SINGLE ANGLE COLLET 20MM TIR, 60.33MM OAL, 20MM OVERALL DIAM
    £54.14 Price with VAT: £64.96 Buy Surplus As Low As £32.63 Price with VAT: £39.16
    £32.63 Price with VAT: £39.16
    KENNAMETAL 1014721

    KENNAMETAL

    1014721

    TG/PG 100 14MM STANDARD SINGLE ANGLE COLLET 14MM TIR, 60.33MM OAL, 14MM OVERALL DIAM
    £54.14 Price with VAT: £64.96 Buy Surplus As Low As £32.63 Price with VAT: £39.16
    £32.63 Price with VAT: £39.16
    KENNAMETAL CV40BTG10030G

    KENNAMETAL

    CV40BTG10030G

    COLLET CHUCK TOOL HOLDE3
    ✓ IN STOCK!
    £55.27 Price with VAT: £66.32 Buy Surplus As Low As £24.18 Price with VAT: £29.02
    £24.18 Price with VAT: £29.02
    KENNAMETAL CV40TG100300

    KENNAMETAL

    CV40TG100300

    COLLET CHUCK TOOL HOLDER
    ✓ IN STOCK!
    £55.27 Price with VAT: £66.32 Buy Surplus As Low As £24.18 Price with VAT: £29.02
    £24.18 Price with VAT: £29.02
    KENNAMETAL CV40TG100400

    KENNAMETAL

    CV40TG100400

    COLLET CHUCK TOOL HOLDER
    ✓ IN STOCK!
    £55.27 Price with VAT: £66.32 Buy Surplus As Low As £24.18 Price with VAT: £29.02
    £24.18 Price with VAT: £29.02
    KENNAMETAL 1260385

    KENNAMETAL

    1260385

    SERIES KGSP, CM CLAMP FOR INDEXABLES
    £55.62 Price with VAT: £66.74 Buy Surplus As Low As £33.37 Price with VAT: £40.05
    £33.37 Price with VAT: £40.05
    KENNAMETAL 1260380

    KENNAMETAL

    1260380

    SERIES SEPARATOR, CM CLAMP FOR INDEXABLES LEFT HAND CUT
    £55.62 Price with VAT: £66.74 Buy Surplus As Low As £33.37 Price with VAT: £40.05
    £33.37 Price with VAT: £40.05
    KENNAMETAL 1084750

    KENNAMETAL

    1084750

    7 TO 8MM ER32 COLLET 0.0152MM TIR, 40.01MM OAL, 32.99MM OVERALL DIAM
    £56.36 Price with VAT: £67.63 Buy Surplus As Low As £34.11 Price with VAT: £40.94
    £34.11 Price with VAT: £40.94
    KENNAMETAL 1191841

    KENNAMETAL

    1191841

    SERIES SEPARATOR, CM CLAMP FOR INDEXABLES LEFT HAND CUT
    £57.84 Price with VAT: £69.41 Buy Surplus As Low As £34.85 Price with VAT: £41.83
    £34.85 Price with VAT: £41.83
    KENNAMETAL 500DA1000

    KENNAMETAL

    500DA1000

    KENNAMETAL, 500DA1000, COLLET 1IN CAPACITY
    ✓ IN STOCK!
    £58.42 Price with VAT: £70.11 Buy Surplus As Low As £32.76 Price with VAT: £39.32
    £32.76 Price with VAT: £39.32
    KENNAMETAL CV40ZEM075175

    KENNAMETAL

    CV40ZEM075175

    COLLET CHUCK TOOL HOLDER
    ✓ IN STOCK!
    £58.53 Price with VAT: £70.23 Buy Surplus As Low As £25.60 Price with VAT: £30.72
    £25.60 Price with VAT: £30.72
    KENNAMETAL 2614672

    KENNAMETAL

    2614672

    KENNAMETAL, TOOL BIT HOLDER
    £58.59 Price with VAT: £70.30 Buy Surplus As Low As £29.66 Price with VAT: £35.60
    £29.66 Price with VAT: £35.60
    KENNAMETAL DSDNN-124

    KENNAMETAL

    DSDNN-124

    TURNING TOOL HOLDER
    £59.33 Price with VAT: £71.19 Buy Surplus As Low As £35.60 Price with VAT: £42.72
    £35.60 Price with VAT: £42.72
    KENNAMETAL 1014647

    KENNAMETAL

    1014647

    3/16" DA180 DA COLLET 41.28MM OAL, 26.29MM OVERALL DIAM, 0.03MM TIR
    £59.33 Price with VAT: £71.19 Buy Surplus As Low As £35.60 Price with VAT: £42.72
    £35.60 Price with VAT: £42.72
    KENNAMETAL 1014579

    KENNAMETAL

    1014579

    1/8" DA180 DA COLLET 41.28MM OAL, 26.29MM OVERALL DIAM, 0.03MM TIR
    £59.33 Price with VAT: £71.19 Buy Surplus As Low As £35.60 Price with VAT: £42.72
    £35.60 Price with VAT: £42.72
    KENNAMETAL 1014609

    KENNAMETAL

    1014609

    5/32" DA180 DA COLLET 41.28MM OAL, 26.29MM OVERALL DIAM, 0.03MM TIR
    £59.33 Price with VAT: £71.19 Buy Surplus As Low As £35.60 Price with VAT: £42.72
    £35.60 Price with VAT: £42.72
    KENNAMETAL 1014651

    KENNAMETAL

    1014651

    13/64" DA180 DA COLLET 41.28MM OAL, 26.29MM OVERALL DIAM, 0.03MM TIR
    £59.33 Price with VAT: £71.19 Buy Surplus As Low As £35.60 Price with VAT: £42.72
    £35.60 Price with VAT: £42.72
    KENNAMETAL 32ER200M

    KENNAMETAL

    32ER200M

    COLLET, SINGLE ANGLE, ROUND FACE, 33.00 MM MAX. BODY DIAMETER, 40.00MM OVERALL LENGTH, STEEL CONSTRUCTION
    ✓ IN STOCK!
    £60.29 Price with VAT: £72.35 Buy Surplus As Low As £32.23 Price with VAT: £38.68
    £32.23 Price with VAT: £38.68
    KENNAMETAL 60082288R00

    KENNAMETAL

    60082288R00

    KENNAMETAL, 60082288R00, SPECIAL COUNTER SINK TOOL, 9700 RPM MAX, MS-1369, T57
    £61.55 Price with VAT: £73.86 Buy Surplus As Low As £31.15 Price with VAT: £37.38
    £31.15 Price with VAT: £37.38
    KENNAMETAL NRL-163C

    KENNAMETAL

    NRL-163C

    TOOL HOLDER 1IN
    £63.03 Price with VAT: £75.64 Buy Surplus As Low As £37.82 Price with VAT: £45.38
    £37.82 Price with VAT: £45.38
    Repair Yours Contact Us
    KENNAMETAL 1019175

    KENNAMETAL

    1019175

    SERIES KENLOC, WEDGELOCK, WC CLAMP FOR INDEXABLES NEUTRAL CUT, COMPATIBLE WITH S987 CLAMP SCREWS
    £63.03 Price with VAT: £75.64 Buy Surplus As Low As £37.82 Price with VAT: £45.38
    £37.82 Price with VAT: £45.38
    KENNAMETAL 180DA0750

    KENNAMETAL

    180DA0750

    COLLET DOUBLE ANGLE, RANGE: 0.7500 INCH TO 0.7188 INCH, DA DOUBLE ANGLE
    £64.41 Price with VAT: £77.30 Buy Surplus As Low As £39.70 Price with VAT: £47.64
    £39.70 Price with VAT: £47.64
    KENNAMETAL 1260391

    KENNAMETAL

    1260391

    SERIES SEPARATOR, CM CLAMP FOR INDEXABLES RIGHT HAND CUT
    £65.26 Price with VAT: £78.31 Buy Surplus As Low As £39.30 Price with VAT: £47.16
    £39.30 Price with VAT: £47.16
    KENNAMETAL SNMA643

    KENNAMETAL

    SNMA643

    INSERT, KCK20 CARBIDE TURNING INSERT, TICN/AL2O3 FINISH, 3/4" INSCRIBED CIRCLE, 3/64" CORNER RADIUS, 90 SQUARE, SERIES KENLOC, 3758154
    £65.26 Price with VAT: £78.31 Buy Surplus As Low As £39.30 Price with VAT: £47.16
    £39.30 Price with VAT: £47.16
    KENNAMETAL 6316-2162CHGG

    KENNAMETAL

    6316-2162CHGG

    KENNAMETAL, 6316-2162CHGG, 63162162CHGG, TOOL HOLDER
    ✓ IN STOCK!
    £66.04 Price with VAT: £79.25 Buy Surplus As Low As £36.59 Price with VAT: £43.91
    £36.59 Price with VAT: £43.91
    KENNAMETAL CV40TG075600

    KENNAMETAL

    CV40TG075600

    COLLET CHUCK TOOL HOLDER
    £67.41 Price with VAT: £80.89 Buy Surplus As Low As £41.19 Price with VAT: £49.43
    £41.19 Price with VAT: £49.43
    KENNAMETAL 1025774

    KENNAMETAL

    1025774

    3 TO 3.5MM ER8 COLLET 0.0152MM TIR, 13.49MM OAL, 8.51MM OVERALL DIAM
    £68.23 Price with VAT: £81.87 Buy Surplus As Low As £41.53 Price with VAT: £49.83
    £41.53 Price with VAT: £49.83
    KENNAMETAL 1025777

    KENNAMETAL

    1025777

    4.5 TO 5MM ER8 COLLET 0.0152MM TIR, 13.49MM OAL, 8.51MM OVERALL DIAM
    £68.23 Price with VAT: £81.87 Buy Surplus As Low As £41.53 Price with VAT: £49.83
    £41.53 Price with VAT: £49.83
    KENNAMETAL 1013686

    KENNAMETAL

    1013686

    TG/PG 50 1/8" STANDARD SINGLE ANGLE COLLET 3.175MM TIR, 36.52MM OAL, 3.17MM OVERALL DIAM
    £69.71 Price with VAT: £83.65 Buy Surplus As Low As £42.27 Price with VAT: £50.72
    £42.27 Price with VAT: £50.72
    KENNAMETAL 1014268

    KENNAMETAL

    1014268

    TG/PG 50 3/8" STANDARD SINGLE ANGLE COLLET 9.525MM TIR, 36.52MM OAL, 9.53MM OVERALL DIAM
    £69.71 Price with VAT: £83.65 Buy Surplus As Low As £42.27 Price with VAT: £50.72
    £42.27 Price with VAT: £50.72
    KENNAMETAL 1013834

    KENNAMETAL

    1013834

    TG/PG 50 5/16" STANDARD SINGLE ANGLE COLLET 7.925MM TIR, 36.52MM OAL, 7.92MM OVERALL DIAM
    £69.71 Price with VAT: £83.65 Buy Surplus As Low As £42.27 Price with VAT: £50.72
    £42.27 Price with VAT: £50.72
    KENNAMETAL 1014232

    KENNAMETAL

    1014232

    TG/PG 50 1/2" STANDARD SINGLE ANGLE COLLET 12.7MM TIR, 36.52MM OAL, 12.7MM OVERALL DIAM
    £69.71 Price with VAT: £83.65 Buy Surplus As Low As £42.27 Price with VAT: £50.72
    £42.27 Price with VAT: £50.72
    KENNAMETAL 1260378

    KENNAMETAL

    1260378

    SERIES SEPARATOR, CM CLAMP FOR INDEXABLES RIGHT HAND CUT
    £70.45 Price with VAT: £84.54 Buy Surplus As Low As £42.27 Price with VAT: £50.72
    £42.27 Price with VAT: £50.72
    KENNAMETAL NSR-163C

    KENNAMETAL

    NSR-163C

    GROOVING TOOL HOLDER 1INX1IN SHANK
    £71.19 Price with VAT: £85.43 Buy Surplus As Low As £43.01 Price with VAT: £51.61
    £43.01 Price with VAT: £51.61
    Repair Yours Contact Us
    KENNAMETAL MWLNL204D

    KENNAMETAL

    MWLNL204D

    KENNAMETAL ,MWLNL204D , TOOL BIT HOLDER, KL SERIES
    ✓ IN STOCK!
    £75.92 Price with VAT: £91.11 Buy Surplus As Low As £46.74 Price with VAT: £56.09
    £46.74 Price with VAT: £56.09
    KENNAMETAL A16TSDXCL3

    KENNAMETAL

    A16TSDXCL3

    KENNAMETAL , A16TSDXCL3 , SCREW ON BORING BAR
    £77.12 Price with VAT: £92.55 Buy Surplus As Low As £38.56 Price with VAT: £46.27
    £38.56 Price with VAT: £46.27
    KENNAMETAL 1013720

    KENNAMETAL

    1013720

    TG/PG 75 3/32" STANDARD SINGLE ANGLE COLLET 2.388MM TIR, 46.81MM OAL, 2.39MM OVERALL DIAM
    £77.87 Price with VAT: £93.44 Buy Surplus As Low As £46.72 Price with VAT: £56.06
    £46.72 Price with VAT: £56.06
    KENNAMETAL DSSNL-124B

    KENNAMETAL

    DSSNL-124B

    TOOL HOLDER 3/4X3/4X4-1/2IN
    £78.61 Price with VAT: £94.33 Buy Surplus As Low As £47.46 Price with VAT: £56.95
    £47.46 Price with VAT: £56.95
    KENNAMETAL MCLNR-164C

    KENNAMETAL

    MCLNR-164C

    TURNING TOOLHOLDER SIZE 164C
    £78.61 Price with VAT: £94.33 Buy Surplus As Low As £47.46 Price with VAT: £56.95
    £47.46 Price with VAT: £56.95
    KENNAMETAL 1014106

    KENNAMETAL

    1014106

    TG/PG 150 1" STANDARD SINGLE ANGLE COLLET 25.4MM TIR, 76.2MM OAL, 25.4MM OVERALL DIAM
    £78.61 Price with VAT: £94.33 Buy Surplus As Low As £47.46 Price with VAT: £56.95
    £47.46 Price with VAT: £56.95
    KENNAMETAL 1017017

    KENNAMETAL

    1017017

    SERIES TG/PG 50 0.255" SINGLE ANGLE HAND TAP COLLET 1/4" TAP
    £78.61 Price with VAT: £94.33 Buy Surplus As Low As £47.46 Price with VAT: £56.95
    £47.46 Price with VAT: £56.95
    KENNAMETAL 1014170

    KENNAMETAL

    1014170

    TG/PG 150 1-1/2" STANDARD SINGLE ANGLE COLLET 38.1MM TIR, 76.2MM OAL, 38.1MM OVERALL DIAM
    £78.61 Price with VAT: £94.33 Buy Surplus As Low As £47.46 Price with VAT: £56.95
    £47.46 Price with VAT: £56.95
    KENNAMETAL 1014143

    KENNAMETAL

    1014143

    TG/PG 150 1-3/8" STANDARD SINGLE ANGLE COLLET 34.925MM TIR, 76.2MM OAL, 34.92MM OVERALL DIAM
    £78.61 Price with VAT: £94.33 Buy Surplus As Low As £47.46 Price with VAT: £56.95
    £47.46 Price with VAT: £56.95
    KENNAMETAL 1014137

    KENNAMETAL

    1014137

    TG/PG 150 1-1/4" STANDARD SINGLE ANGLE COLLET 31.75MM TIR, 76.2MM OAL, 31.75MM OVERALL DIAM
    £78.61 Price with VAT: £94.33 Buy Surplus As Low As £47.46 Price with VAT: £56.95
    £47.46 Price with VAT: £56.95
    KENNAMETAL NSR-162C

    KENNAMETAL

    NSR-162C

    TOOL HOLDER TOP NOTCH TURN 1IN SHANK
    £78.61 Price with VAT: £94.33 Buy Surplus As Low As £47.46 Price with VAT: £56.95
    £47.46 Price with VAT: £56.95
    Previous Next
    1 2 3 4 5 6 7 8 9 10