Product Search

    SEARCH NOW FOR ALL YOUR KENNAMETAL SOLUTIONS

    Radwell is here to supply you with all your plant floor needs.

    Radwell is not an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.

    Filter Results
    Results 451-500 of 495.
    KENNAMETAL CH-36202-05

    KENNAMETAL

    HERTEL

    CH-36202-05

    CLAMP NUTS; THREAD SIZE: 5/8-18 ; PRODUCT COMPATIBILITY: TOGGLE CLAMPS ; UNSPSC CODE: 27112100 (MOQ=1, PKG QTY=1)CH-36202-05
    £2.52 Price with VAT: £3.02 Buy Surplus As Low As £1.51 Price with VAT: £1.81
    £1.51 Price with VAT: £1.81
    KENNAMETAL CH-36204

    KENNAMETAL

    HERTEL

    CH-36204

    STANDARD STRAIGHT LINE ACTION CLAMP, 300 LB LOAD CAPACITY, 1.5354" PLUNGER TRAVEL, STEEL 0.429" PLUNGER DIA, STRAIGHT HANDLECH-36204
    £24.52 Price with VAT: £29.42 Buy Surplus As Low As £14.86 Price with VAT: £17.83
    £14.86 Price with VAT: £17.83
    KENNAMETAL CH-SA-08034-T1

    KENNAMETAL

    HERTEL

    CH-SA-08034-T1

    CLAMP SPINDLE ASSEMBLIES; APPLICATION: TOGGLE CLAMPS ; SPINDLE MATERIAL: NYLON ; THREAD SIZE: #5-32 ; THREAD LENGTH (MM): 0.7500 ; TIP TYPE: HEX ; TIP SURFACE DIAMETER (DECIMAL INCH): 0.1563 ...
    £0.84 Price with VAT: £1.01 Buy Surplus As Low As £0.50 Price with VAT: £0.60
    £0.50 Price with VAT: £0.60
    KENNAMETAL CH-SA-14134

    KENNAMETAL

    HERTEL

    CH-SA-14134

    CLAMP SPINDLE RETAINERS & FLANGED WASHERS; TYPE: FLAT TIP ; FOR SPINDLE DIAMETER (INCH): 1/4 ; THREAD SIZE: 1/4-20 ; MATERIAL: CARBON STEEL ; FINISH COATING: ZINC ; OVERALL LENGTH (INCH): 1- ...
    £1.74 Price with VAT: £2.08 Buy Surplus As Low As £1.04 Price with VAT: £1.25
    £1.04 Price with VAT: £1.25
    KENNAMETAL CH-101-D

    KENNAMETAL

    HERTEL

    CH-101-D

    MANUAL HOLD-DOWN TOGGLE CLAMP, VERTICAL, 397 LB CAPACITY, U-BAR, FLANGED BASE 60 ° HANDLE MOVEMENT, 100 ° BAR OPENING, STEELCH-101-D
    £22.29 Price with VAT: £26.75 Buy Surplus As Low As £13.37 Price with VAT: £16.05
    £13.37 Price with VAT: £16.05
    KENNAMETAL CH-12050-U

    KENNAMETAL

    HERTEL

    CH-12050-U

    MANUAL HOLD-DOWN TOGGLE CLAMP, VERTICAL, 200 LB CAPACITY, U-BAR, FLANGED BASE 60 ° HANDLE MOVEMENT, 100 ° BAR OPENING, STEELCH-12050-U
    £14.86 Price with VAT: £17.83 Buy Surplus As Low As £8.92 Price with VAT: £10.70
    £8.92 Price with VAT: £10.70
    KENNAMETAL CH-12132

    KENNAMETAL

    HERTEL

    CH-12132

    MANUAL HOLD-DOWN TOGGLE CLAMP, VERTICAL, 500 LB CAPACITY, U-BAR, FLANGED BASE 60 ° HANDLE MOVEMENT, 100 ° BAR OPENING, STEELCH-12132
    £25.26 Price with VAT: £30.31 Buy Surplus As Low As £15.60 Price with VAT: £18.72
    £15.60 Price with VAT: £18.72
    KENNAMETAL CH-12265

    KENNAMETAL

    HERTEL

    CH-12265

    MANUAL HOLD-DOWN TOGGLE CLAMP, VERTICAL, 750 LB CAPACITY, U-BAR, FLANGED BASE 58 ° HANDLE MOVEMENT, 105 ° BAR OPENING, STEELCH-12265
    £27.49 Price with VAT: £32.99 Buy Surplus As Low As £17.09 Price with VAT: £20.51
    £17.09 Price with VAT: £20.51
    KENNAMETAL CH-36204-05

    KENNAMETAL

    HERTEL

    CH-36204-05

    CLAMP NUTS; THREAD SIZE: 3/4-16 ; PRODUCT COMPATIBILITY: TOGGLE CLAMPS (MOQ=1, PKG QTY=1)CH-36204-05
    £2.77 Price with VAT: £3.32 Buy Surplus As Low As £1.66 Price with VAT: £1.99
    £1.66 Price with VAT: £1.99
    KENNAMETAL CH-36224-05

    KENNAMETAL

    HERTEL

    CH-36224-05

    CLAMP NUTS; THREAD SIZE: 1-14 ; PRODUCT COMPATIBILITY: TOGGLE CLAMPS ; UNSPSC CODE: 27112100 (MOQ=1, PKG QTY=1)CH-36224-05
    £3.28 Price with VAT: £3.94 Buy Surplus As Low As £1.97 Price with VAT: £2.36
    £1.97 Price with VAT: £2.36
    KENNAMETAL CH-451

    KENNAMETAL

    HERTEL

    CH-451

    PULL-ACTION LATCH CLAMP, HORIZONTAL, 375 LB, U-HOOK, FLANGED BASE 4" DRAWING MOVEMENT, 5.63" OAL, STRAIGHT HANDLE, STEELCH-451
    £20.06 Price with VAT: £24.07 Buy Surplus As Low As £12.63 Price with VAT: £15.16
    £12.63 Price with VAT: £15.16
    KENNAMETAL CH-FC-108515 PB

    KENNAMETAL

    HERTEL

    CH-FC-108515 PB

    CLAMP SPINDLE RETAINERS & FLANGED WASHERS; TYPE: CAP ; FOR SPINDLE DIAMETER (MM - 0 DECIMALS): M10 ; THREAD SIZE: M10X1.5 ; MATERIAL: CARBON STEEL ; FINISH COATING: ZINC ; OVERALL LENGTH (MM ...
    £4.87 Price with VAT: £5.84 Buy Surplus As Low As £2.92 Price with VAT: £3.51
    £2.92 Price with VAT: £3.51
    KENNAMETAL CH-302-F

    KENNAMETAL

    HERTEL

    CH-302-F

    STANDARD STRAIGHT LINE ACTION CLAMP, 300 LB LOAD CAPACITY, 1.2598" PLUNGER TRAVEL, FLANGED BASE, STEEL 4 MOUNTING HOLE, 0.2165" HOLE, 0.425" PLUNGER DIA, STRAIGHT HANDLECH-302-F
    £24.52 Price with VAT: £29.42 Buy Surplus As Low As £14.86 Price with VAT: £17.83
    £14.86 Price with VAT: £17.83
    KENNAMETAL CH-304-E

    KENNAMETAL

    HERTEL

    CH-304-E

    STANDARD STRAIGHT LINE ACTION CLAMP, 850 LB LOAD CAPACITY, 1.6535" PLUNGER TRAVEL, FLANGED BASE, STEEL 4 MOUNTING HOLE, 0.328" HOLE, 0.63" PLUNGER DIA, STRAIGHT HANDLECH-304-E
    £46.81 Price with VAT: £56.17 Buy Surplus As Low As £28.23 Price with VAT: £33.88
    £28.23 Price with VAT: £33.88
    KENNAMETAL CH-40341

    KENNAMETAL

    HERTEL

    CH-40341

    PULL-ACTION LATCH CLAMP, HORIZONTAL, 1,984 LB, U-HOOK, FLANGED BASE 2.5" DRAWING MOVEMENT, 6.969" OAL, STRAIGHT HANDLE, STEELCH-40341
    £34.18 Price with VAT: £41.01 Buy Surplus As Low As £20.80 Price with VAT: £24.97
    £20.80 Price with VAT: £24.97
    KENNAMETAL FM-200/A6

    KENNAMETAL

    HERTEL

    FM-200/A6

    LATHE CHUCK ADAPTER BACK PLATE, 8" CHUCK, FOR PLAIN BACK SELF-CENTERING CHUCKS SERIES A, A1/A2-6 MOUNT, 8" OD, 4-1/16" THROUGH-HOLE DIA, 21/64" FLANGE HEIGHT, STEELFM-200/A6
    £256.34 Price with VAT: £307.61 Buy Surplus As Low As £153.80 Price with VAT: £184.56
    £153.80 Price with VAT: £184.56
    KENNAMETAL FM-200/D6

    KENNAMETAL

    HERTEL

    FM-200/D6

    LATHE CHUCK ADAPTER BACK PLATE, 8" CHUCK, FOR PLAIN BACK SELF-CENTERING CHUCKS SERIES D, D1-6 MOUNT, 8" OD, 4-1/16" THROUGH-HOLE DIA, 1-7/16" FLANGE HEIGHT, STEEL
    £304.63 Price with VAT: £365.56 Buy Surplus As Low As £182.78 Price with VAT: £219.34
    £182.78 Price with VAT: £219.34
    KENNAMETAL H08700452

    KENNAMETAL

    HERTEL

    H08700452

    SCREW FOR INDEXABLES :FOR USE WITH INSERTS (MOQ=5, PKG QTY=1)H08700452
    £4.83 Price with VAT: £5.79 Buy Surplus As Low As £2.90 Price with VAT: £3.47
    £2.90 Price with VAT: £3.47
    KENNAMETAL H59868372

    KENNAMETAL

    HERTEL

    H59868372

    BORING BAR, 0.208" MIN BORE, 1-7/8" MAX DEPTH, RIGHT HAND HBBC INDEXABLE 6" OAL, 3/16" SHANK DIAM, USES CD.., HBBC INSERTS, THROUGH COOLANT
    £309.84 Price with VAT: £371.80 Buy Surplus As Low As £186.50 Price with VAT: £223.79
    £186.50 Price with VAT: £223.79
    KENNAMETAL MTS 224

    KENNAMETAL

    HERTEL

    MTS 224

    INSERT SCREW FOR INDEXABLES, TORX DRIVE INSERT HOLDING SCREW COMPATIBLE (MOQ=5, PKG QTY=1)MTS 224
    £9.66 Price with VAT: £11.59 Buy Surplus As Low As £5.80 Price with VAT: £6.95
    £5.80 Price with VAT: £6.95
    KENNAMETAL MTS 184

    KENNAMETAL

    HERTEL

    MTS 184

    INSERT SCREW FOR INDEXABLES, TORX DRIVE INSERT HOLDING SCREW COMPATIBLE (MOQ=5, PKG QTY=1)MTS 184
    £9.66 Price with VAT: £11.59 Buy Surplus As Low As £5.80 Price with VAT: £6.95
    £5.80 Price with VAT: £6.95
    KENNAMETAL KG 5050CV

    KENNAMETAL

    KG 5050CV

    DISCONTINUED BY MANUFACTURER, INDEXABLE INSERT ENDMILL
    Buy Surplus As Low As £37.10 Price with VAT: £44.52
    £37.10 Price with VAT: £44.52
    KENNAMETAL STFPR12CA16

    KENNAMETAL

    STFPR12CA16

    DISCONTINUED BY MANUFACTURER, CARTRIDGE
    Buy Surplus As Low As £29.85 Price with VAT: £35.82
    £29.85 Price with VAT: £35.82
    KENNAMETAL 1182973

    KENNAMETAL

    1182973

    TURNING INSERT, SPGF, 322
    Call for Availability
    KENNAMETAL KM50S5060

    KENNAMETAL

    KM50S5060

    DISCONTINUED BY MANUFACTURER, ADPAPTER EXTENSION, KM SYSTEM, 60 MM PROJECTION, 20-25 FT/LBS, 27-34 NM, (1144265)
    Buy Surplus As Low As £140.67 Price with VAT: £168.81
    £140.67 Price with VAT: £168.81
    KENNAMETAL 1013701

    KENNAMETAL

    1013701

    KM63 CONNECTION, LATHE CLAMPING UNIT AND TURRET SPARE PARTS PACKAGE USE WITH ECM S ROUND SHANK CLAMPING UNIT, ES OFFSET REDUCERS, KM BT FORM AD, KM CV FORM B, AD, KM DV FORM B, AD, KS HSK FO ...
    £115.91 Price with VAT: £139.09 Buy Surplus As Low As £69.84 Price with VAT: £83.81
    £69.84 Price with VAT: £83.81
    KENNAMETAL 1015011

    KENNAMETAL

    1015011

    COLLET CHUCK: 0.5625" CAPACITY, DOUBLE ANGLE COLLET, 0.9843" SHANK DIA, STRAIGHT SHANK 1.9291" PROJECTION, 0.0001" TIR, THROUGH COOLANT
    £149.35 Price with VAT: £179.21 Buy Surplus As Low As £89.90 Price with VAT: £107.89
    £89.90 Price with VAT: £107.89
    KENNAMETAL 1016748

    KENNAMETAL

    1016748

    SHIM FOR INDEXABLES: TURNING, (MOQ=10, PKG QTY=1)
    £19.32 Price with VAT: £23.18 Buy Surplus As Low As £11.89 Price with VAT: £14.27
    £11.89 Price with VAT: £14.27
    KENNAMETAL 1023697

    KENNAMETAL

    1023697

    KM32 CONNECTION, LATHE CLAMPING UNIT AND TURRET SPARE PARTS PACKAGE USE WITH NCM SQUARE SHANK REPLACEMENT, NCM F FLANGE MOUNT, NCM S ROUND SHANK CLAMPING UNIT, R, L CMI AXIAL VDI, R, LCM RIG ...
    £115.91 Price with VAT: £139.09 Buy Surplus As Low As £69.84 Price with VAT: £83.81
    £69.84 Price with VAT: £83.81
    KENNAMETAL 1095548

    KENNAMETAL

    1095548

    MODULAR BORING HEAD: RIGHT HAND, SIZE H40 THROUGH COOLANT, SERIES KENLOC
    £367.05 Price with VAT: £440.46 Buy Surplus As Low As £220.67 Price with VAT: £264.81
    £220.67 Price with VAT: £264.81
    KENNAMETAL 1131888

    KENNAMETAL

    1131888

    CAP SCREW FOR INDEXABLES, (MOQ=:10, PKG QTY=1)
    £22.29 Price with VAT: £26.75 Buy Surplus As Low As £13.37 Price with VAT: £16.05
    £13.37 Price with VAT: £16.05
    KENNAMETAL 1132034

    KENNAMETAL

    1132034

    CAP SCREW FOR INDEXABLES: 6 MM HEX SOCKET, (MOQ=10, PKG QTY=1)
    £24.52 Price with VAT: £29.42 Buy Surplus As Low As £14.86 Price with VAT: £17.83
    £14.86 Price with VAT: £17.83
    KENNAMETAL 1517180

    KENNAMETAL

    1517180

    LOCK PIN FOR INDEXABLE TURNING TOOLS
    £16.35 Price with VAT: £19.62 Buy Surplus As Low As £10.40 Price with VAT: £12.48
    £10.40 Price with VAT: £12.48
    KENNAMETAL 1953471

    KENNAMETAL

    1953471

    COLLET CHUCK: 2.03 MM CAPACITY, ER COLLET, MODULAR CONNECTION SHANK 2.56" PROJECTION, 0.0001" TIR, THROUGH COOLANT
    £770.50 Price with VAT: £924.60 Buy Surplus As Low As £462.90 Price with VAT: £555.48
    £462.90 Price with VAT: £555.48
    KENNAMETAL 2397720

    KENNAMETAL

    2397720

    MODULAR TOOL HOLDING EXTENSION: KM63UT, 6.299" OAL, 2.48" BODY DIA 2.48 INCH BODY DIAMETER X 6.299 INCH OVERALL LENGTH
    £791.31 Price with VAT: £949.57 Buy Surplus As Low As £474.78 Price with VAT: £569.74
    £474.78 Price with VAT: £569.74
    KENNAMETAL 1-103-0800

    KENNAMETAL

    1-103-0800

    MANUAL LATHE CHUCK, 6 JAWS, 8" DIA, SELF-CENTERING PLAIN BACK MOUNT, ADJUSTABLE, 2,200 MAX RPM (MOQ=1, PKG QTY=1)
    £1,457.04 Price with VAT: £1,748.45 Buy Surplus As Low As £874.52 Price with VAT: £1,049.43
    £874.52 Price with VAT: £1,049.43
    KENNAMETAL 1-103-1200

    KENNAMETAL

    1-103-1200

    MANUAL LATHE CHUCK, 6 JAWS, 12" DIA, SELF-CENTERING PLAIN BACK MOUNT, ADJUSTABLE, 1,500 MAX RPM (MOQ=1, PKG QTY=1)
    £3,285.59 Price with VAT: £3,942.71 Buy Surplus As Low As £1,971.95 Price with VAT: £2,366.34
    £1,971.95 Price with VAT: £2,366.34
    KENNAMETAL 1-201-1200

    KENNAMETAL

    1-201-1200

    MANUAL LATHE CHUCK, 3 JAWS, 12" DIA, SELF-CENTERING PLAIN BACK MOUNT, 1,500 MAX RPM (MOQ=1, PKG QTY=1)
    £1,157.61 Price with VAT: £1,389.13 Buy Surplus As Low As £694.72 Price with VAT: £833.66
    £694.72 Price with VAT: £833.66
    KENNAMETAL 1-202-0801

    KENNAMETAL

    1-202-0801

    MANUAL LATHE CHUCK, 3 JAWS, 8" DIA, SELF-CENTERING SOLID JAWS, 2,500 MAX RPM (MOQ=1, PKG QTY=1)
    £618.93 Price with VAT: £742.71 Buy Surplus As Low As £371.51 Price with VAT: £445.81
    £371.51 Price with VAT: £445.81
    KENNAMETAL 1-221-0806

    KENNAMETAL

    1-221-0806

    SELF-CENTERING MANUAL LATHE CHUCK, 3-JAW, 8" DIA 2,500 MAX RPM (MOQ=1, PKG QTY=1)
    £1,245.29 Price with VAT: £1,494.34 Buy Surplus As Low As £747.47 Price with VAT: £896.96
    £747.47 Price with VAT: £896.96
    KENNAMETAL CTCONO8-3J

    KENNAMETAL

    HERTEL

    CTCONO8-3J

    CTCO N TOOLHOLDER, STYLE C, 0 END CUTTING EDGE ANGLE, FOR 11 POSITIVE TRIANGLE
    £72.07 Price with VAT: £86.49 Buy Surplus As Low As £43.84 Price with VAT: £52.61
    £43.84 Price with VAT: £52.61
    KENNAMETAL 1067739

    KENNAMETAL

    1067739

    WEDGES FOR INDEXABLE GROOVING CUTTERS, (MOQ=1, PKG QTY=1)
    £57.95 Price with VAT: £69.55 Buy Surplus As Low As £34.92 Price with VAT: £41.91
    £34.92 Price with VAT: £41.91
    KENNAMETAL 1137528

    KENNAMETAL

    1137528

    CAP SCREW FOR INDEXABLES, (MOQ=:1, PKG QTY=1)
    £3.19 Price with VAT: £3.83 Buy Surplus As Low As £1.92 Price with VAT: £2.30
    £1.92 Price with VAT: £2.30
    KENNAMETAL 2018194

    KENNAMETAL

    2018194

    INSERT SCREW FOR INDEXABLES: T9 TORX, (MOQ=1, PKG QTY=1)
    £5.49 Price with VAT: £6.58 Buy Surplus As Low As £3.29 Price with VAT: £3.95
    £3.29 Price with VAT: £3.95
    KENNAMETAL 306C 15/16

    KENNAMETAL

    306C 15/16

    REDUCED SHANK DRILL BIT: 0.9375'' DIA, 3/4'' SHANK DIA, 135 &DEG, COBALT (MOQ=1, PKG QTY=1)
    £58.70 Price with VAT: £70.44 Buy Surplus As Low As £35.66 Price with VAT: £42.80
    £35.66 Price with VAT: £42.80
    Previous
    1 2 3 4 5 6 7 8 9 10