SEARCH NOW FOR ALL YOUR KENNAMETAL SOLUTIONS
Radwell is here to supply you with all your plant floor needs.
Radwell is not an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.
Rockwell Disclaimer: The product is used surplus. Radwell is not an authorised surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorised dealers. Because Radwell is not an authorised distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Radwell makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Radwell also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Radwell also makes no representations as to your right to install any such firmware on the product. Radwell will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Filter Results
KENNAMETAL
1014143
TG/PG 150 1-3/8" STANDARD SINGLE ANGLE COLLET 34.925MM TIR, 76.2MM OAL, 34.92MM OVERALL DIAM
£47.46
Price with VAT:
£56.95
KENNAMETAL
1014137
TG/PG 150 1-1/4" STANDARD SINGLE ANGLE COLLET 31.75MM TIR, 76.2MM OAL, 31.75MM OVERALL DIAM
£47.46
Price with VAT:
£56.95
KENNAMETAL
1014133
8MM DA100 DA COLLET 36.53MM OAL, 19.53MM OVERALL DIAM, 0.03MM TIR
£17.80
Price with VAT:
£21.36
KENNAMETAL
1013917
TG/PG 75 1/2" STANDARD SINGLE ANGLE COLLET 12.7MM TIR, 46.81MM OAL, 12.7MM OVERALL DIAM
£26.70
Price with VAT:
£32.04
KENNAMETAL
1013855
TG/PG 75 3/8" STANDARD SINGLE ANGLE COLLET 9.525MM TIR, 46.81MM OAL, 9.53MM OVERALL DIAM
£26.70
Price with VAT:
£32.04
KENNAMETAL
1019892
HEX SOCKET CAP SCREW FOR INDEXABLES 5/32" SOCKET HEX, SOCKET HEAD
£1.00
Price with VAT:
£1.21
KENNAMETAL
1017456
SERIES TG/PG 100 14.99MM SINGLE ANGLE HAND TAP COLLET 3/4" TAP
£60.81
Price with VAT:
£72.97
KENNAMETAL
1017455
SERIES TG/PG 100 13.77MM SINGLE ANGLE HAND TAP COLLET 11/16" TAP
£68.97
Price with VAT:
£82.76
KENNAMETAL
1017390
SERIES TG/PG 100 9.68MM SINGLE ANGLE HAND TAP COLLET 3/8" TAP
£60.81
Price with VAT:
£72.97
KENNAMETAL
1017389
SERIES TG/PG 100 8.08MM SINGLE ANGLE HAND TAP COLLET 5/16" TAP
£60.81
Price with VAT:
£72.97
KENNAMETAL
1017332
SERIES TG/PG 75 0.7" SINGLE ANGLE PIPE TAP COLLET 3/8" TAP
£60.81
Price with VAT:
£72.97
KENNAMETAL
1014872
7/16" DA180 DA COLLET 41.28MM OAL, 26.29MM OVERALL DIAM, 0.03MM TIR
£20.76
Price with VAT:
£24.92
KENNAMETAL
1014898
15/32" DA100 DA COLLET 36.53MM OAL, 19.53MM OVERALL DIAM, 0.03MM TIR
£17.80
Price with VAT:
£21.36
KENNAMETAL
4109630
NA3R4 KCU25 CARBIDE THREADING INSERT ALTIN FINISH, INTERNAL/EXTERNAL, ACME, 4 TPI, SERIES TOP NOTCH
£21.51
Price with VAT:
£25.81
KENNAMETAL
2637760
TP20 TORX PLUS CAP SCREW FOR INDEXABLES CLAMP OR INSERT COMPATIBLE, KM3225 TOOLHOLDER
£4.89
Price with VAT:
£5.87
KENNAMETAL
1288984
17 PIECE, 1/8 TO 3/8" CAPACITY, DA200 DOUBLE ANGLE COLLET SET INCREMENTS OF 1/64"
£176.50
Price with VAT:
£211.80
KENNAMETAL
KCGX110308R15-EACH
PROFILING INSERT, TIALN FINISH, 55° INCL ANGLE, PARALLELOGRAM, 0.4567" SIDE LENGTH, 1/8" THICK, 1/32" CORNER RADIUS, KC850, NPR52
£5.09
Price with VAT:
£6.10
KENNAMETAL
WNMG080408RP
KENNAMETAL,WNMG080408RP, ISO CARBIDE INSERT, KENLOC, ROUGHING POSITIVE INSERT, GRADE KCPK05
£5.90
Price with VAT:
£7.07
KENNAMETAL
HERTEL
8000186
1/2" INSCRIBED CIRCLE, ROUND EXTERNAL TURNING SHIM FOR INDEXABLES 1/8" THICK, SM SHIM STYLE, NEGATIVE RAKE, NEUTRAL CUT
£11.87
Price with VAT:
£14.24
KENNAMETAL
HERTEL
8000170
1/2" INSCRIBED CIRCLE, SQUARE EXTERNAL TURNING SHIM FOR INDEXABLES 3/16" THICK, ISSN SHIM STYLE, NEGATIVE RAKE, NEUTRAL CUT8000170
£11.87
Price with VAT:
£14.24
KENNAMETAL
HERTEL
1-202-0801
MANUAL LATHE CHUCKS; CHUCK TYPE: SELF-CENTERING ; NOMINAL CHUCK SIZE: 8 ; NUMBER OF JAWS: 3 ; MOUNT: FRONT MOUNT PLAIN BACK ; THROUGH-HOLE DIAMETER (DECIMAL INCH): .2.1654 ; BODY MATERIAL: C ...
£353.74
Price with VAT:
£424.48
KENNAMETAL
HERTEL
1-202-0400
MANUAL LATHE CHUCKS; CHUCK TYPE: SELF-CENTERING ; NOMINAL CHUCK SIZE: 4 ; NUMBER OF JAWS: 3 ; MOUNT: PLAIN BACK ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 0.7874 ; BODY MATERIAL: CAST IRON (SEM ...
£324.07
Price with VAT:
£388.89
KENNAMETAL
6694046
2MM X 20MM HSK100A TAPER SHANK ER32 COLLET CHUCK 209.9MM OAL, 160MM PROJECTION
£427.15
Price with VAT:
£512.58
KENNAMETAL
HERTEL
1-221-0804
MANUAL LATHE CHUCKS; CHUCK TYPE: SELF-CENTERING ; NOMINAL CHUCK SIZE: 8 ; NUMBER OF JAWS: 3 ; MOUNT: D1-4 ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 2.1654 ; BODY MATERIAL: CAST IRON (SEMI-STEE ...
£886.19
Price with VAT:
£1,063.43
KENNAMETAL
HERTEL
1-221-0604
MANUAL LATHE CHUCKS; CHUCK TYPE: SELF-CENTERING ; NOMINAL CHUCK SIZE: 6 ; NUMBER OF JAWS: 3 ; MOUNT: D1-4 ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 1.1635 ; BODY MATERIAL: CAST IRON (SEMI-STEE ...
£558.41
Price with VAT:
£670.09
KENNAMETAL
HERTEL
1-201-1001
MANUAL LATHE CHUCKS; CHUCK TYPE: SELF-CENTERING ; NOMINAL CHUCK SIZE: 10 ; NUMBER OF JAWS: 3 ; MOUNT: FRONT MOUNT PLAIN BACK ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 2.9921 ; BODY MATERIAL: C ...
£451.62
Price with VAT:
£541.95
KENNAMETAL
5673343
TORX PLUS INSERT SCREW FOR INDEXABLES SHANK COMPATIBLE
£4.39
Price with VAT:
£5.26
KENNAMETAL
3964134
KM50TS MODULAR CONNECTION TAP CHUCK ADAPTER 75MM PROJECTION, SIZE 2 ADAPTER, QUICK CHANGE
£593.27
Price with VAT:
£711.92
KENNAMETAL
3964133
KM50TS MODULAR CONNECTION TAP CHUCK ADAPTER 50MM PROJECTION, SIZE 1 ADAPTER, QUICK CHANGE
£593.27
Price with VAT:
£711.92
KENNAMETAL
HERTEL
8000178
1/2" INSCRIBED CIRCLE, DIAMOND (SHAPE) EXTERNAL TURNING SHIM FOR INDEXABLES 3/16" THICK, IVSN SHIM STYLE, NEGATIVE RAKE, NEUTRAL CUT
£23.73
Price with VAT:
£28.48
KENNAMETAL
HERTEL
8000176
5/8" INSCRIBED CIRCLE, TRIANGLE EXTERNAL TURNING SHIM FOR INDEXABLES 3/16" THICK, ITSN SHIM STYLE, NEGATIVE RAKE, NEUTRAL CUT8000176
£18.54
Price with VAT:
£22.25
KENNAMETAL
HERTEL
8000175
1/2" INSCRIBED CIRCLE, TRIANGLE EXTERNAL TURNING SHIM FOR INDEXABLES 3/16" THICK, ITSN SHIM STYLE, NEGATIVE RAKE, NEUTRAL CUT
£15.57
Price with VAT:
£18.69
KENNAMETAL
HERTEL
8000174
1/4" INSCRIBED CIRCLE, TRIANGLE EXTERNAL TURNING SHIM FOR INDEXABLES 1/8" THICK, SM SHIM STYLE, POSITIVE RAKE, NEUTRAL CUT8000174
£10.38
Price with VAT:
£12.46
KENNAMETAL
HERTEL
8000171
3/4" INSCRIBED CIRCLE, SQUARE EXTERNAL TURNING SHIM FOR INDEXABLES 3/16" THICK, ISSN SHIM STYLE, NEGATIVE RAKE, NEUTRAL CUT
£17.80
Price with VAT:
£21.36
KENNAMETAL
HERTEL
8000166
1/2" INSCRIBED CIRCLE, ROUND EXTERNAL TURNING SHIM FOR INDEXABLES 3/16" THICK, IRSN SHIM STYLE, NEGATIVE RAKE, NEUTRAL CUT
£15.57
Price with VAT:
£18.69
KENNAMETAL
HERTEL
8000164
1/2" INSCRIBED CIRCLE, DIAMOND (SHAPE) EXTERNAL TURNING SHIM FOR INDEXABLES 1/4" THICK, IDSN SHIM STYLE, NEGATIVE RAKE, NEUTRAL CUT
£14.83
Price with VAT:
£17.80
KENNAMETAL
HERTEL
8000189
3/8" INSCRIBED CIRCLE, ROUND EXTERNAL TURNING SHIM FOR INDEXABLES 1/8" THICK, SM SHIM STYLE, NEGATIVE RAKE, NEUTRAL CUT8000189
£11.12
Price with VAT:
£13.35
KENNAMETAL
HERTEL
8000188
3/8" INSCRIBED CIRCLE, ROUND EXTERNAL TURNING SHIM FOR INDEXABLES 1/8" THICK, SM SHIM STYLE, NEGATIVE RAKE, NEUTRAL CUT
£10.38
Price with VAT:
£12.46
KENNAMETAL
HERTEL
8000163
3/8" INSCRIBED CIRCLE, DIAMOND (SHAPE) EXTERNAL TURNING SHIM FOR INDEXABLES 1/8" THICK, IDSN SHIM STYLE, NEGATIVE RAKE, NEUTRAL CUT
£13.35
Price with VAT:
£16.02
KENNAMETAL
HERTEL
750624
3/8", 5/8" LOC, 3/8" SHANK DIAM, 2" OAL, 2 FLUTE, SOLID CARBIDE SQUARE END MILL SINGLE END, TIN FINISH, SPIRAL FLUTE, 30° HELIX, CENTERCUTTING, RIGHT HAND CUT
£20.76
Price with VAT:
£24.92
KENNAMETAL
HERTEL
7000390
2" BODY DIAM, MANUAL SINGLE CUTTER BORING HEAD COLLET CHUCK MOUNT, ER32 TAPER SHANK, 16MM HOLE DIAM, ER32, 0.12" TO 3.4600" BORE DIAM, SERIES HBH150
£662.98
Price with VAT:
£795.57
KENNAMETAL
HERTEL
2292258
LETTER Y 6-FLUTE STRAIGHT SHANK STRAIGHT FLUTE HIGH SPEED STEEL CHUCKING REAMER BRIGHT FINISH, 7" OAL, 1-3/4" FLUTE LENGTH, RH CUT
£49.43
Price with VAT:
£59.32
KENNAMETAL
HERTEL
1-221-0806
MANUAL LATHE CHUCKS; CHUCK TYPE: SELF-CENTERING ; NOMINAL CHUCK SIZE: 8 ; NUMBER OF JAWS: 3 ; MOUNT: D1-6 ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 2.1654 ; BODY MATERIAL: CAST IRON (SEMI-STEE ...
£713.40
Price with VAT:
£856.08
KENNAMETAL
HERTEL
1-202-0300
MANUAL LATHE CHUCKS; CHUCK TYPE: SELF-CENTERING ; NOMINAL CHUCK SIZE: 3 ; NUMBER OF JAWS: 3 ; MOUNT: PLAIN BACK ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 0.6299 ; BODY MATERIAL: CAST IRON (SEM ...
£304.79
Price with VAT:
£365.75
KENNAMETAL
HERTEL
1-201-1000
MANUAL LATHE CHUCKS; CHUCK TYPE: SELF-CENTERING ; NOMINAL CHUCK SIZE: 10 ; NUMBER OF JAWS: 3 ; MOUNT: PLAIN BACK ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 2.9921 ; BODY MATERIAL: CAST IRON (SE ...
£450.14
Price with VAT:
£540.17
KENNAMETAL
HERTEL
1-322-1004
MANUAL LATHE CHUCKS; CHUCK TYPE: INDEPENDENT ; NOMINAL CHUCK SIZE: 10 ; NUMBER OF JAWS: 4 ; MOUNT: D1-4 ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 2.2360 ; BODY MATERIAL: CAST IRON (SEMI-STEEL) ...
£872.10
Price with VAT:
£1,046.52