SEARCH NOW FOR ALL YOUR KENNAMETAL SOLUTIONS
Radwell is here to supply you with all your plant floor needs.
Radwell is not an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.
Filter Results
KENNAMETAL
3101079
HYDRAULIC CHUCK SLEEVE: 3/4" BORE, 5/8" SHANK, (MOQ=1, PKG QTY=1)3101079
£47.31
Price with VAT:
£56.77
KENNAMETAL
3582592
DRILL CHUCK: 0.0197 TO 0.315" CAPACITY, INTEGRAL SHANK MOUNT, BT30, (MOQ=1, PKG QTY=1)3582592
£189.98
Price with VAT:
£227.98
KENNAMETAL
2269975
COLLET SET: 15 PC, SERIES ER40, 1/8 TO 1" CAPACITY, (MOQ=1, PKG QTY=1)2269975
£515.97
Price with VAT:
£619.17
KENNAMETAL
3950248
COLLET CHUCK, 2 TO 20 MM CAPACITY, ER COLLET, MODULAR CONNECTION SHANK 2.3622" PROJECTION, THROUGH COOLANT3950248
£270.55
Price with VAT:
£324.67
KENNAMETAL
SNMA643
INSERT, KCK20 CARBIDE TURNING INSERT, TICN/AL2O3 FINISH, 3/4" INSCRIBED CIRCLE, 3/64" CORNER RADIUS, 90 SQUARE, SERIES KENLOC, 3758154
£39.18
Price with VAT:
£47.01
KENNAMETAL
4170385
SERIES DUAL CLAMP, CM CLAMP FOR INDEXABLES (MOQ=5, PKG QTY=1)4170385
£23.66
Price with VAT:
£28.39
KENNAMETAL
6693878
COLLET CHUCK, 2 TO 20 MM CAPACITY, ER COLLET, TAPER SHANK 4" PROJECTION, BALANCED TO 20,000 RPM, THROUGH COOLANT (MOQ=1, PKG QTY=1)6693878
£135.28
Price with VAT:
£162.33
KENNAMETAL
6694045
COLLET CHUCK, 1 TO 16 MM CAPACITY, ER COLLET, 100 MM SHANK DIA, TAPER SHANK 160 MM PROJECTION, BALANCED TO 20,000 RPM, THROUGH COOLANT (MOQ=1, PKG QTY=1)6694045
£402.87
Price with VAT:
£483.45
KENNAMETAL
HERTEL
2292258
LETTER Y 6-FLUTE STRAIGHT SHANK STRAIGHT FLUTE HIGH SPEED STEEL CHUCKING REAMER BRIGHT FINISH, 7" OAL, 1-3/4" FLUTE LENGTH, RH CUT
£49.28
Price with VAT:
£59.13
KENNAMETAL
HERTEL
CH-20235
MANUAL HOLD-DOWN TOGGLE CLAMP, HORIZONTAL, 750 LB CAPACITY, U-BAR, FLANGED BASE 55 ° HANDLE MOVEMENT, 85 ° BAR OPENING, STEELCH-20235
£19.22
Price with VAT:
£23.06
KENNAMETAL
HERTEL
CH-225-D
MANUAL HOLD-DOWN TOGGLE CLAMP, HORIZONTAL, 500 LB CAPACITY, U-BAR, FLANGED BASE 65 ° HANDLE MOVEMENT, 90 ° BAR OPENING, STEELCH-225-D
£11.09
Price with VAT:
£13.31
KENNAMETAL
HERTEL
CH-36003
STANDARD STRAIGHT LINE ACTION CLAMP, 600 LB LOAD CAPACITY, 1.252" PLUNGER TRAVEL, FLANGED BASE, STEEL 4 MOUNTING HOLE, 0.22" HOLE, 0.433" PLUNGER DIA, STRAIGHT HANDLECH-36003
£15.52
Price with VAT:
£18.63
KENNAMETAL
HERTEL
CH-36092
STANDARD STRAIGHT LINE ACTION CLAMP, 397 LB LOAD CAPACITY, 1.2598" PLUNGER TRAVEL, FLANGED BASE, STEEL 4 MOUNTING HOLE, 0.203" HOLE, 0.5" PLUNGER DIA, STRAIGHT HANDLECH-36092
£15.52
Price with VAT:
£18.63
KENNAMETAL
HERTEL
CH-FC-086312
CLAMP SPINDLE RETAINERS & FLANGED WASHERS, TYPE, CAP, TYPE, CAP, FOR SPINDLE DIAMETER (MM), M8, FOR SPINDLE DIAMETER (MM - 0 DECIMALS), M8, THREAD SIZE, M8 X 1.25, THREAD SIZE, M8 X 1.25, MA ...
£1.00
Price with VAT:
£1.20
KENNAMETAL
HERTEL
CH-FW-141
CARBON STEEL, FLANGED WASHER FOR M6 DIAM CLAMP SPINDLE (MOQ=1, PKG QTY=1)CH-FW-141
£7.10
Price with VAT:
£8.52
KENNAMETAL
HERTEL
CH-201-B
MANUAL HOLD-DOWN TOGGLE CLAMP, HORIZONTAL, 198 LB CAPACITY, U-BAR, FLANGED BASE 60 ° HANDLE MOVEMENT, 85 ° BAR OPENING, STEELCH-201-B
£10.35
Price with VAT:
£12.42
KENNAMETAL
HERTEL
CH-22502-B
MANUAL HOLD-DOWN TOGGLE CLAMP, HORIZONTAL, 551 LB CAPACITY, U-BAR, FLANGED BASE 76 ° HANDLE MOVEMENT, 94 ° BAR OPENING, STEELCH-22502-B
£14.05
Price with VAT:
£16.85
KENNAMETAL
HERTEL
CH-301-A
STANDARD STRAIGHT LINE ACTION CLAMP, 100 LB LOAD CAPACITY, 0.6575" PLUNGER TRAVEL, FLANGED BASE, STEEL 3 MOUNTING HOLE, 0.172" HOLE, 0.252" PLUNGER DIA, STRAIGHT HANDLECH-301-A
£10.35
Price with VAT:
£12.42
KENNAMETAL
HERTEL
CH-30607
STANDARD STRAIGHT LINE ACTION CLAMP, 700 LB LOAD CAPACITY, 1.626" PLUNGER TRAVEL, FLANGED BASE, STEEL 6 MOUNTING HOLE, 0.28" HOLE, 0.5" PLUNGER DIA, STRAIGHT HANDLECH-30607
£19.96
Price with VAT:
£23.95
KENNAMETAL
HERTEL
CH-SA-56212
CLAMP SPINDLE RETAINERS & FLANGED WASHERS; TYPE: FLAT TIP ; FOR SPINDLE DIAMETER (INCH): 5/16 ; THREAD SIZE: 5/16-18 ; MATERIAL: CARBON STEEL ; FINISH COATING: ZINC ; OVERALL LENGTH (INCH): ...
£1.06
Price with VAT:
£1.28
KENNAMETAL
HERTEL
CH-36204
STANDARD STRAIGHT LINE ACTION CLAMP, 300 LB LOAD CAPACITY, 1.5354" PLUNGER TRAVEL, STEEL 0.429" PLUNGER DIA, STRAIGHT HANDLECH-36204
£14.78
Price with VAT:
£17.74
KENNAMETAL
HERTEL
CH-431
PULL-ACTION LATCH CLAMP, HORIZONTAL, 700 LB, U-HOOK, FLANGED BASE 1.75" DRAWING MOVEMENT, 4.961" OAL, STRAIGHT HANDLE, STEELCH-431
£14.93
Price with VAT:
£17.92
KENNAMETAL
HERTEL
CH-SA-14134
CLAMP SPINDLE RETAINERS & FLANGED WASHERS; TYPE: FLAT TIP ; FOR SPINDLE DIAMETER (INCH): 1/4 ; THREAD SIZE: 1/4-20 ; MATERIAL: CARBON STEEL ; FINISH COATING: ZINC ; OVERALL LENGTH (INCH): 1- ...
£1.04
Price with VAT:
£1.24
KENNAMETAL
HERTEL
CH-101-D
MANUAL HOLD-DOWN TOGGLE CLAMP, VERTICAL, 397 LB CAPACITY, U-BAR, FLANGED BASE 60 ° HANDLE MOVEMENT, 100 ° BAR OPENING, STEELCH-101-D
£13.31
Price with VAT:
£15.97
KENNAMETAL
HERTEL
CH-12050-U
MANUAL HOLD-DOWN TOGGLE CLAMP, VERTICAL, 200 LB CAPACITY, U-BAR, FLANGED BASE 60 ° HANDLE MOVEMENT, 100 ° BAR OPENING, STEELCH-12050-U
£8.87
Price with VAT:
£10.64
KENNAMETAL
HERTEL
CH-12132
MANUAL HOLD-DOWN TOGGLE CLAMP, VERTICAL, 500 LB CAPACITY, U-BAR, FLANGED BASE 60 ° HANDLE MOVEMENT, 100 ° BAR OPENING, STEELCH-12132
£15.52
Price with VAT:
£18.63
KENNAMETAL
HERTEL
CH-12265
MANUAL HOLD-DOWN TOGGLE CLAMP, VERTICAL, 750 LB CAPACITY, U-BAR, FLANGED BASE 58 ° HANDLE MOVEMENT, 105 ° BAR OPENING, STEELCH-12265
£17.00
Price with VAT:
£20.40
KENNAMETAL
HERTEL
CH-36204-05
CLAMP NUTS; THREAD SIZE: 3/4-16 ; PRODUCT COMPATIBILITY: TOGGLE CLAMPS (MOQ=1, PKG QTY=1)CH-36204-05
£1.65
Price with VAT:
£1.98
KENNAMETAL
HERTEL
CH-36224-05
CLAMP NUTS; THREAD SIZE: 1-14 ; PRODUCT COMPATIBILITY: TOGGLE CLAMPS ; UNSPSC CODE: 27112100 (MOQ=1, PKG QTY=1)CH-36224-05
£1.96
Price with VAT:
£2.35
KENNAMETAL
HERTEL
CH-451
PULL-ACTION LATCH CLAMP, HORIZONTAL, 375 LB, U-HOOK, FLANGED BASE 4" DRAWING MOVEMENT, 5.63" OAL, STRAIGHT HANDLE, STEELCH-451
£12.57
Price with VAT:
£15.08
KENNAMETAL
HERTEL
CH-FC-108515 PB
CLAMP SPINDLE RETAINERS & FLANGED WASHERS; TYPE: CAP ; FOR SPINDLE DIAMETER (MM - 0 DECIMALS): M10 ; THREAD SIZE: M10X1.5 ; MATERIAL: CARBON STEEL ; FINISH COATING: ZINC ; OVERALL LENGTH (MM ...
£2.91
Price with VAT:
£3.49
KENNAMETAL
HERTEL
CH-302-F
STANDARD STRAIGHT LINE ACTION CLAMP, 300 LB LOAD CAPACITY, 1.2598" PLUNGER TRAVEL, FLANGED BASE, STEEL 4 MOUNTING HOLE, 0.2165" HOLE, 0.425" PLUNGER DIA, STRAIGHT HANDLECH-302-F
£14.78
Price with VAT:
£17.74
KENNAMETAL
HERTEL
CH-304-E
STANDARD STRAIGHT LINE ACTION CLAMP, 850 LB LOAD CAPACITY, 1.6535" PLUNGER TRAVEL, FLANGED BASE, STEEL 4 MOUNTING HOLE, 0.328" HOLE, 0.63" PLUNGER DIA, STRAIGHT HANDLECH-304-E
£28.09
Price with VAT:
£33.71
KENNAMETAL
HERTEL
CH-36330
STANDARD STRAIGHT-LINE ACTION CLAMPS; LOAD CAPACITY (N): 11120.5 ; LOAD CAPACITY (LB.): 2500.00 ; LOAD CAPACITY (KG): 1133.96 ; LOAD CAPACITY: 11121 ; PLUNGER TRAVEL (MM): 50 ; PLUNGER TRAVE ...
£22.40
Price with VAT:
£26.88
KENNAMETAL
HERTEL
CH-40341
PULL-ACTION LATCH CLAMP, HORIZONTAL, 1,984 LB, U-HOOK, FLANGED BASE 2.5" DRAWING MOVEMENT, 6.969" OAL, STRAIGHT HANDLE, STEELCH-40341
£20.70
Price with VAT:
£24.84
KENNAMETAL
HERTEL
FM-200/A6
LATHE CHUCK ADAPTER BACK PLATE, 8" CHUCK, FOR PLAIN BACK SELF-CENTERING CHUCKS SERIES A, A1/A2-6 MOUNT, 8" OD, 4-1/16" THROUGH-HOLE DIA, 21/64" FLANGE HEIGHT, STEELFM-200/A6
£153.02
Price with VAT:
£183.62
KENNAMETAL
HERTEL
FM-200/D6
LATHE CHUCK ADAPTER BACK PLATE, 8" CHUCK, FOR PLAIN BACK SELF-CENTERING CHUCKS SERIES D, D1-6 MOUNT, 8" OD, 4-1/16" THROUGH-HOLE DIA, 1-7/16" FLANGE HEIGHT, STEEL
£181.85
Price with VAT:
£218.22
KENNAMETAL
HERTEL
H-81154040000
COMBO DRILL & COUNTERSINK: #4, 5/16" BODY DIAM, BRIGHT FINISH, HIGH SPEED STEEL, 2-1/8" OAL, DOUBLE END, PLAIN EDGE, 1/8" DRILL POINT DIAM, 1/8" DRILL POINT LENGTHH-81154040000
£8.13
Price with VAT:
£9.76
KENNAMETAL
HERTEL
H08700452
SCREW FOR INDEXABLES :FOR USE WITH INSERTS (MOQ=5, PKG QTY=1)H08700452
£2.88
Price with VAT:
£3.46
KENNAMETAL
HERTEL
H08700627
SCREWS FOR INDEXABLE THREADING FOR USE WITH ANVILSH08700627
£1.54
Price with VAT:
£1.84
KENNAMETAL
HERTEL
H59868372
BORING BAR, 0.208" MIN BORE, 1-7/8" MAX DEPTH, RIGHT HAND HBBC INDEXABLE 6" OAL, 3/16" SHANK DIAM, USES CD.., HBBC INSERTS, THROUGH COOLANT
£185.54
Price with VAT:
£222.65
KENNAMETAL
HERTEL
MTS 224
INSERT SCREW FOR INDEXABLES, TORX DRIVE INSERT HOLDING SCREW COMPATIBLE (MOQ=5, PKG QTY=1)MTS 224
£5.77
Price with VAT:
£6.92
