Product Search

    SEARCH NOW FOR ALL YOUR KENNAMETAL SOLUTIONS

    Radwell is here to supply you with all your plant floor needs.

    Radwell is not an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.

    Rockwell Disclaimer: The product is used surplus. Radwell is not an authorised surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorised dealers. Because Radwell is not an authorised distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Radwell makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Radwell also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Radwell also makes no representations as to your right to install any such firmware on the product. Radwell will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

    Filter Results
    Results 201-250 of 495.
    KENNAMETAL 1084750

    KENNAMETAL

    1084750

    7 TO 8MM ER32 COLLET 0.0152MM TIR, 40.01MM OAL, 32.99MM OVERALL DIAM
    £56.36 Price with VAT: £67.63 Buy Surplus As Low As £34.11 Price with VAT: £40.94
    £34.11 Price with VAT: £40.94
    KENNAMETAL 1260385

    KENNAMETAL

    1260385

    SERIES KGSP, CM CLAMP FOR INDEXABLES
    £55.62 Price with VAT: £66.74 Buy Surplus As Low As £33.37 Price with VAT: £40.05
    £33.37 Price with VAT: £40.05
    KENNAMETAL 1260380

    KENNAMETAL

    1260380

    SERIES SEPARATOR, CM CLAMP FOR INDEXABLES LEFT HAND CUT
    £55.62 Price with VAT: £66.74 Buy Surplus As Low As £33.37 Price with VAT: £40.05
    £33.37 Price with VAT: £40.05
    KENNAMETAL CV40BTG10030G

    KENNAMETAL

    CV40BTG10030G

    COLLET CHUCK TOOL HOLDE3
    ✓ IN STOCK!
    £55.27 Price with VAT: £66.32 Buy Surplus As Low As £24.18 Price with VAT: £29.02
    £24.18 Price with VAT: £29.02
    KENNAMETAL CV40TG100400

    KENNAMETAL

    CV40TG100400

    COLLET CHUCK TOOL HOLDER
    ✓ IN STOCK!
    £55.27 Price with VAT: £66.32 Buy Surplus As Low As £24.18 Price with VAT: £29.02
    £24.18 Price with VAT: £29.02
    KENNAMETAL CV40TG100300

    KENNAMETAL

    CV40TG100300

    COLLET CHUCK TOOL HOLDER
    ✓ IN STOCK!
    £55.27 Price with VAT: £66.32 Buy Surplus As Low As £24.18 Price with VAT: £29.02
    £24.18 Price with VAT: £29.02
    KENNAMETAL 1085780

    KENNAMETAL

    1085780

    SERIES KGSP, CM CLAMP FOR INDEXABLES
    £54.14 Price with VAT: £64.96 Buy Surplus As Low As £32.63 Price with VAT: £39.16
    £32.63 Price with VAT: £39.16
    KENNAMETAL 1014703

    KENNAMETAL

    1014703

    TG/PG 100 10MM STANDARD SINGLE ANGLE COLLET 10MM TIR, 60.33MM OAL, 10MM OVERALL DIAM
    £54.14 Price with VAT: £64.96 Buy Surplus As Low As £32.63 Price with VAT: £39.16
    £32.63 Price with VAT: £39.16
    KENNAMETAL 1014053

    KENNAMETAL

    1014053

    TG/PG 100 7/8" STANDARD SINGLE ANGLE COLLET 22.225MM TIR, 60.33MM OAL, 22.23MM OVERALL DIAM
    £54.14 Price with VAT: £64.96 Buy Surplus As Low As £32.63 Price with VAT: £39.16
    £32.63 Price with VAT: £39.16
    KENNAMETAL 1013856

    KENNAMETAL

    1013856

    TG/PG 100 3/8" STANDARD SINGLE ANGLE COLLET 9.525MM TIR, 60.33MM OAL, 9.53MM OVERALL DIAM
    £54.14 Price with VAT: £64.96 Buy Surplus As Low As £32.63 Price with VAT: £39.16
    £32.63 Price with VAT: £39.16
    KENNAMETAL 1014753

    KENNAMETAL

    1014753

    TG/PG 100 20MM STANDARD SINGLE ANGLE COLLET 20MM TIR, 60.33MM OAL, 20MM OVERALL DIAM
    £54.14 Price with VAT: £64.96 Buy Surplus As Low As £32.63 Price with VAT: £39.16
    £32.63 Price with VAT: £39.16
    KENNAMETAL 1014721

    KENNAMETAL

    1014721

    TG/PG 100 14MM STANDARD SINGLE ANGLE COLLET 14MM TIR, 60.33MM OAL, 14MM OVERALL DIAM
    £54.14 Price with VAT: £64.96 Buy Surplus As Low As £32.63 Price with VAT: £39.16
    £32.63 Price with VAT: £39.16
    KENNAMETAL 1014749

    KENNAMETAL

    1014749

    TG/PG 100 18MM STANDARD SINGLE ANGLE COLLET 18MM TIR, 60.33MM OAL, 18MM OVERALL DIAM
    £54.14 Price with VAT: £64.96 Buy Surplus As Low As £32.63 Price with VAT: £39.16
    £32.63 Price with VAT: £39.16
    KENNAMETAL 1013878

    KENNAMETAL

    1013878

    TG/PG 100 7/16" STANDARD SINGLE ANGLE COLLET 11.125MM TIR, 60.33MM OAL, 11.13MM OVERALL DIAM
    £54.14 Price with VAT: £64.96 Buy Surplus As Low As £32.63 Price with VAT: £39.16
    £32.63 Price with VAT: £39.16
    KENNAMETAL LNER25M

    KENNAMETAL

    LNER25M

    LOCKNUT COLLET CHUCK 25SERIES
    ✓ IN STOCK!
    £53.39 Price with VAT: £64.07 Buy Surplus As Low As £25.23 Price with VAT: £30.27
    £25.23 Price with VAT: £30.27
    KENNAMETAL CV40TG045275

    KENNAMETAL

    CV40TG045275

    COLLET CHUCK TOOL HOLDER
    ✓ IN STOCK!
    £52.97 Price with VAT: £63.57 Buy Surplus As Low As £22.75 Price with VAT: £27.30
    £22.75 Price with VAT: £27.30
    KENNAMETAL 1191845

    KENNAMETAL

    1191845

    SERIES SEPARATOR, CM CLAMP FOR INDEXABLES RIGHT HAND CUT
    £52.65 Price with VAT: £63.18 Buy Surplus As Low As £31.89 Price with VAT: £38.27
    £31.89 Price with VAT: £38.27
    KENNAMETAL 1013745

    KENNAMETAL

    1013745

    TG/PG 75 1/8" STANDARD SINGLE ANGLE COLLET 3.175MM TIR, 46.81MM OAL, 3.17MM OVERALL DIAM
    £52.65 Price with VAT: £63.18 Buy Surplus As Low As £31.89 Price with VAT: £38.27
    £31.89 Price with VAT: £38.27
    KENNAMETAL 1013774

    KENNAMETAL

    1013774

    TG/PG 75 3/16" STANDARD SINGLE ANGLE COLLET 4.775MM TIR, 46.81MM OAL, 4.78MM OVERALL DIAM
    £52.65 Price with VAT: £63.18 Buy Surplus As Low As £31.89 Price with VAT: £38.27
    £31.89 Price with VAT: £38.27
    KENNAMETAL 1013752

    KENNAMETAL

    1013752

    TG/PG 75 11/64" STANDARD SINGLE ANGLE COLLET 4.369MM TIR, 46.81MM OAL, 4.37MM OVERALL DIAM
    £52.65 Price with VAT: £63.18 Buy Surplus As Low As £31.89 Price with VAT: £38.27
    £31.89 Price with VAT: £38.27
    KENNAMETAL 1013688

    KENNAMETAL

    1013688

    TG/PG 75 5/32" STANDARD SINGLE ANGLE COLLET 3.962MM TIR, 46.81MM OAL, 3.96MM OVERALL DIAM
    £52.65 Price with VAT: £63.18 Buy Surplus As Low As £31.89 Price with VAT: £38.27
    £31.89 Price with VAT: £38.27
    KENNAMETAL 1013782

    KENNAMETAL

    1013782

    TG/PG 75 15/64" STANDARD SINGLE ANGLE COLLET 5.944MM TIR, 46.81MM OAL, 5.94MM OVERALL DIAM
    £52.65 Price with VAT: £63.18 Buy Surplus As Low As £31.89 Price with VAT: £38.27
    £31.89 Price with VAT: £38.27
    KENNAMETAL 1191846

    KENNAMETAL

    1191846

    SERIES SEPARATOR, CM CLAMP FOR INDEXABLES RIGHT HAND CUT
    £52.65 Price with VAT: £63.18 Buy Surplus As Low As £31.89 Price with VAT: £38.27
    £31.89 Price with VAT: £38.27
    KENNAMETAL 1013777

    KENNAMETAL

    1013777

    TG/PG 75 13/64" STANDARD SINGLE ANGLE COLLET 5.156MM TIR, 46.81MM OAL, 5.16MM OVERALL DIAM
    £52.65 Price with VAT: £63.18 Buy Surplus As Low As £31.89 Price with VAT: £38.27
    £31.89 Price with VAT: £38.27
    KENNAMETAL 5608748

    KENNAMETAL

    5608748

    #10-24 UNC 2 FLUTE H3 OXIDE FINISH HIGH SPEED STEEL SPIRAL POINT EXTENSION TAP PLUG CHAMFER, 6" OAL, SERIES T820
    £51.91 Price with VAT: £62.29 Buy Surplus As Low As £31.15 Price with VAT: £37.38
    £31.15 Price with VAT: £37.38
    KENNAMETAL 1260396

    KENNAMETAL

    1260396

    SERIES SEPARATOR, CM CLAMP FOR INDEXABLES LEFT HAND CUT
    £51.91 Price with VAT: £62.29 Buy Surplus As Low As £31.15 Price with VAT: £37.38
    £31.15 Price with VAT: £37.38
    KENNAMETAL 1260395

    KENNAMETAL

    1260395

    SERIES SEPARATOR, CM CLAMP FOR INDEXABLES LEFT HAND CUT
    £51.91 Price with VAT: £62.29 Buy Surplus As Low As £31.15 Price with VAT: £37.38
    £31.15 Price with VAT: £37.38
    KENNAMETAL KTAR-163

    KENNAMETAL

    KTAR-163

    TURNING TOOL HOLDER
    £51.17 Price with VAT: £61.40 Buy Surplus As Low As £31.15 Price with VAT: £37.38
    £31.15 Price with VAT: £37.38
    KENNAMETAL 1099458

    KENNAMETAL

    1099458

    5/8" INSCRIBED CIRCLE, TRIANGLE TURNING SHIM FOR INDEXABLES 0.188" THICK, SM SHIM STYLE, POSITIVE RAKE, LEFT HAND, NEUTRAL, RIGHT HAND CUT
    £48.20 Price with VAT: £57.84 Buy Surplus As Low As £28.92 Price with VAT: £34.71
    £28.92 Price with VAT: £34.71
    KENNAMETAL DNMG432LF-KC9010

    KENNAMETAL

    DNMG432LF-KC9010

    TURNIG TOOL HOLDER
    £47.46 Price with VAT: £56.95 Buy Surplus As Low As £28.92 Price with VAT: £34.71
    £28.92 Price with VAT: £34.71
    KENNAMETAL DNMG432UN-KC9315

    KENNAMETAL

    DNMG432UN-KC9315

    TURNIG TOOL HOLDER
    £47.46 Price with VAT: £56.95 Buy Surplus As Low As £28.92 Price with VAT: £34.71
    £28.92 Price with VAT: £34.71
    KENNAMETAL DNMA433-KC910

    KENNAMETAL

    DNMA433-KC910

    TURNIG TOOL HOLDER
    £47.46 Price with VAT: £56.95 Buy Surplus As Low As £28.92 Price with VAT: £34.71
    £28.92 Price with VAT: £34.71
    KENNAMETAL DDPNN-164D

    KENNAMETAL

    DDPNN-164D

    TOOL HOLDER TYPE D 6IN LENGTH 1IN SHANK
    £47.46 Price with VAT: £56.95 Buy Surplus As Low As £28.92 Price with VAT: £34.71
    £28.92 Price with VAT: £34.71
    KENNAMETAL KSFR-164C

    KENNAMETAL

    KSFR-164C

    TOOL HOLDER 1IN SHANK
    £47.46 Price with VAT: £56.95 Buy Surplus As Low As £28.92 Price with VAT: £34.71
    £28.92 Price with VAT: £34.71
    KENNAMETAL DCLNR-1640

    KENNAMETAL

    DCLNR-1640

    TOOL HOLDER
    £47.46 Price with VAT: £56.95 Buy Surplus As Low As £28.92 Price with VAT: £34.71
    £28.92 Price with VAT: £34.71
    KENNAMETAL 8000192

    KENNAMETAL

    HERTEL

    8000192

    1/2" INSCRIBED CIRCLE, ROUND EXTERNAL TURNING SHIM FOR INDEXABLES 3/16" THICK, SM SHIM STYLE, NEGATIVE RAKE, NEUTRAL CUT
    £47.46 Price with VAT: £56.95 Buy Surplus As Low As £28.92 Price with VAT: £34.71
    £28.92 Price with VAT: £34.71
    KENNAMETAL 1013975

    KENNAMETAL

    1013975

    TG/PG 75 19/32" STANDARD SINGLE ANGLE COLLET 15.088MM TIR, 46.81MM OAL, 15.09MM OVERALL DIAM
    £47.46 Price with VAT: £56.95 Buy Surplus As Low As £28.92 Price with VAT: £34.71
    £28.92 Price with VAT: £34.71
    KENNAMETAL 1295604

    KENNAMETAL

    1295604

    1 TO 1.5MM ER16 COLLET 0.0152MM TIR, 27.51MM OAL, 16.99MM OVERALL DIAM
    £46.72 Price with VAT: £56.06 Buy Surplus As Low As £28.18 Price with VAT: £33.82
    £28.18 Price with VAT: £33.82
    KENNAMETAL 1191026

    KENNAMETAL

    1191026

    2.5MM DA200 DA COLLET 30.18MM OAL, 13.69MM OVERALL DIAM, 0.03MM TIR
    £46.72 Price with VAT: £56.06 Buy Surplus As Low As £28.18 Price with VAT: £33.82
    £28.18 Price with VAT: £33.82
    KENNAMETAL 1014543

    KENNAMETAL

    1014543

    3/32" DA200 DA COLLET 30.18MM OAL, 13.69MM OVERALL DIAM, 0.03MM TIR
    £46.72 Price with VAT: £56.06 Buy Surplus As Low As £28.18 Price with VAT: £33.82
    £28.18 Price with VAT: £33.82
    KENNAMETAL 1014540

    KENNAMETAL

    1014540

    5/64" DA200 DA COLLET 30.18MM OAL, 13.69MM OVERALL DIAM, 0.03MM TIR
    £46.72 Price with VAT: £56.06 Buy Surplus As Low As £28.18 Price with VAT: £33.82
    £28.18 Price with VAT: £33.82
    KENNAMETAL 1014536

    KENNAMETAL

    1014536

    1/16" DA200 DA COLLET 30.18MM OAL, 13.69MM OVERALL DIAM, 0.03MM TIR
    £46.72 Price with VAT: £56.06 Buy Surplus As Low As £28.18 Price with VAT: £33.82
    £28.18 Price with VAT: £33.82
    KENNAMETAL CH-36330

    KENNAMETAL

    HERTEL

    CH-36330

    STANDARD STRAIGHT-LINE ACTION CLAMPS; LOAD CAPACITY (N): 11120.5 ; LOAD CAPACITY (LB.): 2500.00 ; LOAD CAPACITY (KG): 1133.96 ; LOAD CAPACITY: 11121 ; PLUNGER TRAVEL (MM): 50 ; PLUNGER TRAVE ...
    £45.38 Price with VAT: £54.46 Buy Surplus As Low As £22.47 Price with VAT: £26.96
    £22.47 Price with VAT: £26.96
    KENNAMETAL 1191842

    KENNAMETAL

    1191842

    SERIES KGSP, CM CLAMP FOR INDEXABLES
    £45.24 Price with VAT: £54.28 Buy Surplus As Low As £27.44 Price with VAT: £32.93
    £27.44 Price with VAT: £32.93
    KENNAMETAL 1191844

    KENNAMETAL

    1191844

    SERIES KGSP, CM CLAMP FOR INDEXABLES
    £45.24 Price with VAT: £54.28 Buy Surplus As Low As £27.44 Price with VAT: £32.93
    £27.44 Price with VAT: £32.93
    KENNAMETAL 1260384

    KENNAMETAL

    1260384

    SERIES SEPARATOR, CM CLAMP FOR INDEXABLES LEFT HAND CUT
    £45.24 Price with VAT: £54.28 Buy Surplus As Low As £27.44 Price with VAT: £32.93
    £27.44 Price with VAT: £32.93
    KENNAMETAL 1191838

    KENNAMETAL

    1191838

    SERIES SEPARATOR, CM CLAMP FOR INDEXABLES LEFT HAND CUT
    £45.24 Price with VAT: £54.28 Buy Surplus As Low As £27.44 Price with VAT: £32.93
    £27.44 Price with VAT: £32.93
    KENNAMETAL 1013980

    KENNAMETAL

    1013980

    TG/PG 75 5/8" STANDARD SINGLE ANGLE COLLET 15.875MM TIR, 46.81MM OAL, 15.88MM OVERALL DIAM
    £44.50 Price with VAT: £53.39 Buy Surplus As Low As £26.70 Price with VAT: £32.04
    £26.70 Price with VAT: £32.04
    KENNAMETAL 1013693

    KENNAMETAL

    1013693

    TG/PG 75 5/16" STANDARD SINGLE ANGLE COLLET 7.925MM TIR, 46.81MM OAL, 7.92MM OVERALL DIAM
    £44.50 Price with VAT: £53.39 Buy Surplus As Low As £26.70 Price with VAT: £32.04
    £26.70 Price with VAT: £32.04
    KENNAMETAL 1013862

    KENNAMETAL

    1013862

    TG/PG 75 13/32" STANDARD SINGLE ANGLE COLLET 10.312MM TIR, 46.81MM OAL, 10.31MM OVERALL DIAM
    £44.50 Price with VAT: £53.39 Buy Surplus As Low As £26.70 Price with VAT: £32.04
    £26.70 Price with VAT: £32.04
    Previous Next
    1 2 3 4 5 6 7 8 9 10