SEARCH NOW FOR ALL YOUR KENNAMETAL SOLUTIONS
Radwell is here to supply you with all your plant floor needs.
Radwell is not an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.
Rockwell Disclaimer: The product is used surplus. Radwell is not an authorised surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorised dealers. Because Radwell is not an authorised distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Radwell makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Radwell also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Radwell also makes no representations as to your right to install any such firmware on the product. Radwell will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Filter Results
KENNAMETAL
HERTEL
1-103-1200
MANUAL LATHE CHUCKS; CHUCK TYPE: SELF-CENTERING ; NOMINAL CHUCK SIZE: 12IN ; NUMBER OF JAWS: 6 ; MATERIAL: FORGED STEEL ; MOUNT: PLAIN BACK ; THROUGH-HOLE DIAMETER: 4.0551IN1-103-1200
£1,879.91
Price with VAT:
£2,255.90
KENNAMETAL
5525688
100MM HSK100A TAPER SHANK DIAM TENSION & COMPRESSION TAPPING CHUCK M10 TO M20 TAP CAPACITY, 118.9MM PROJECTION, THROUGH COOLANT
£1,374.15
Price with VAT:
£1,648.98
KENNAMETAL
HERTEL
1-203-1200
MANUAL LATHE CHUCKS; CHUCK TYPE: SELF-CENTERING ; NOMINAL CHUCK SIZE: 12 ; NUMBER OF JAWS: 4 ; MOUNT: PLAIN BACK ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 4.0551 ; BODY MATERIAL: CAST IRON (SE ...
£1,261.43
Price with VAT:
£1,513.72
KENNAMETAL
HERTEL
1-322-1206
MANUAL LATHE CHUCKS; CHUCK TYPE: INDEPENDENT ; NOMINAL CHUCK SIZE: 12 ; NUMBER OF JAWS: 4 ; MOUNT: D1-6 ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 3.1500 ; BODY MATERIAL: CAST IRON (SEMI-STEEL) ...
£1,223.61
Price with VAT:
£1,468.33
KENNAMETAL
HERTEL
1-322-1208
MANUAL LATHE CHUCKS; CHUCK TYPE: INDEPENDENT ; NOMINAL CHUCK SIZE: 12 ; NUMBER OF JAWS: 4 ; MOUNT: D1-8 ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 3.1500 ; BODY MATERIAL: CAST IRON (SEMI-STEEL)
£1,079.00
Price with VAT:
£1,294.80
KENNAMETAL
2637154
HSK100, 3 TO 15.88MM CAPACITY, TAPERED MOUNT DRILL CHUCK KEYED, 52MM SLEEVE DIAM, 125MM OPEN LENGTH
£1,021.90
Price with VAT:
£1,226.28
KENNAMETAL
HERTEL
1-312-1006
MANUAL LATHE CHUCKS; CHUCK TYPE: INDEPENDENT ; NOMINAL CHUCK SIZE: 10 ; NUMBER OF JAWS: 4 ; MOUNT: A2-6 ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 2.5590 ; BODY MATERIAL: CAST IRON (SEMI-STEEL) ...
£918.08
Price with VAT:
£1,101.70
KENNAMETAL
HERTEL
1-221-0804
MANUAL LATHE CHUCKS; CHUCK TYPE: SELF-CENTERING ; NOMINAL CHUCK SIZE: 8 ; NUMBER OF JAWS: 3 ; MOUNT: D1-4 ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 2.1654 ; BODY MATERIAL: CAST IRON (SEMI-STEE ...
£886.19
Price with VAT:
£1,063.43
KENNAMETAL
HERTEL
1-322-1004
MANUAL LATHE CHUCKS; CHUCK TYPE: INDEPENDENT ; NOMINAL CHUCK SIZE: 10 ; NUMBER OF JAWS: 4 ; MOUNT: D1-4 ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 2.2360 ; BODY MATERIAL: CAST IRON (SEMI-STEEL) ...
£872.10
Price with VAT:
£1,046.52
KENNAMETAL
3.76063R032V
DRILL HEAD, INDEXABLE, HTS, ADJUSTABLE, WITH DFT, 63-68 MM DRILLING RANGE
£837.38
Price with VAT:
£1,004.86
KENNAMETAL
HERTEL
1-103-0800
MANUAL LATHE CHUCKS; CHUCK TYPE: SELF-CENTERING ; NOMINAL CHUCK SIZE: 8IN ; NUMBER OF JAWS: 6 ; MOUNT: PLAIN BACK ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 2.1654 ; BODY MATERIAL: FORGED STEEL ...
£834.28
Price with VAT:
£1,001.14
KENNAMETAL
HERTEL
1-221-1008
MANUAL LATHE CHUCKS; CHUCK TYPE: SELF-CENTERING ; NOMINAL CHUCK SIZE: 10 ; NUMBER OF JAWS: 3 ; MOUNT: D1-8 ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 2.9921 ; BODY MATERIAL: CAST IRON (SEMI-STE ...
£818.71
Price with VAT:
£982.45
KENNAMETAL
5359221
KENNAMETAL, 5359221, TOOL HOLDER, SPECIAL HSK100A, 1-3/4IN BORE
£655.56
Price with VAT:
£786.67
KENNAMETAL
HERTEL
1-221-1006
MANUAL LATHE CHUCKS; CHUCK TYPE: SELF-CENTERING ; NOMINAL CHUCK SIZE: 10 ; NUMBER OF JAWS: 3 ; MOUNT: D1-6 ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 2.9921 ; BODY MATERIAL: CAST IRON (SEMI-STE ...
£783.11
Price with VAT:
£939.73
KENNAMETAL
HERTEL
1-322-1006
MANUAL LATHE CHUCKS; CHUCK TYPE: INDEPENDENT ; NOMINAL CHUCK SIZE: 10 ; NUMBER OF JAWS: 4 ; MOUNT: D1-6 ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 2.5990 ; BODY MATERIAL: CAST IRON (SEMI-STEEL)
£741.58
Price with VAT:
£889.90
KENNAMETAL
HERTEL
1-101-1000
MANUAL LATHE CHUCKS; CHUCK TYPE: SELF-CENTERING ; NOMINAL CHUCK SIZE: 10IN ; NUMBER OF JAWS: 3 ; MATERIAL: FORGED STEEL ; MOUNT: PLAIN BACK ; THROUGH-HOLE DIAMETER: 2.9921IN
£737.88
Price with VAT:
£885.45
KENNAMETAL
HERTEL
1-221-0806
MANUAL LATHE CHUCKS; CHUCK TYPE: SELF-CENTERING ; NOMINAL CHUCK SIZE: 8 ; NUMBER OF JAWS: 3 ; MOUNT: D1-6 ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 2.1654 ; BODY MATERIAL: CAST IRON (SEMI-STEE ...
£713.40
Price with VAT:
£856.08
KENNAMETAL
HERTEL
1-203-1000
MANUAL LATHE CHUCKS; CHUCK TYPE: SELF-CENTERING ; NOMINAL CHUCK SIZE: 10 ; NUMBER OF JAWS: 3 ; MOUNT: PLAIN BACK ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 2.9921 ; BODY MATERIAL: CAST IRON (SE ...
£708.21
Price with VAT:
£849.85
KENNAMETAL
HERTEL
7000390
2" BODY DIAM, MANUAL SINGLE CUTTER BORING HEAD COLLET CHUCK MOUNT, ER32 TAPER SHANK, 16MM HOLE DIAM, ER32, 0.12" TO 3.4600" BORE DIAM, SERIES HBH150
£662.98
Price with VAT:
£795.57
KENNAMETAL
HERTEL
1-322-0804
MANUAL LATHE CHUCKS; CHUCK TYPE: INDEPENDENT ; NOMINAL CHUCK SIZE: 8 ; NUMBER OF JAWS: 4 ; MOUNT: D1-4 ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 2.2050 ; BODY MATERIAL: CAST IRON (SEMI-STEEL)
£608.84
Price with VAT:
£730.61
KENNAMETAL
3964134
KM50TS MODULAR CONNECTION TAP CHUCK ADAPTER 75MM PROJECTION, SIZE 2 ADAPTER, QUICK CHANGE
£593.27
Price with VAT:
£711.92
KENNAMETAL
3964133
KM50TS MODULAR CONNECTION TAP CHUCK ADAPTER 50MM PROJECTION, SIZE 1 ADAPTER, QUICK CHANGE
£593.27
Price with VAT:
£711.92
KENNAMETAL
HSK100AHCSLT08309M
KENNAMETAL, HSK100AHCSLT08309M, TAP HOLDER
✓ IN STOCK!
£605.49
Price with VAT:
£726.59
KENNAMETAL
HERTEL
1-201-0801
MANUAL LATHE CHUCKS; CHUCK TYPE: SELF-CENTERING ; NOMINAL CHUCK SIZE: 8 ; NUMBER OF JAWS: 3 ; MOUNT: FRONT MOUNT PLAIN BACK ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 2.1654 ; BODY MATERIAL: CA ...
£579.18
Price with VAT:
£695.01
KENNAMETAL
HERTEL
1-221-0604
MANUAL LATHE CHUCKS; CHUCK TYPE: SELF-CENTERING ; NOMINAL CHUCK SIZE: 6 ; NUMBER OF JAWS: 3 ; MOUNT: D1-4 ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 1.1635 ; BODY MATERIAL: CAST IRON (SEMI-STEE ...
£558.41
Price with VAT:
£670.09
KENNAMETAL
3.76058R032V
KENNAMETAL, 3.76058R032V, 376058R032V, SERIES HTS DFT, HEAD CONNECTION 16, 63MM MAX DRILL DIAM, INDE
£441.16
Price with VAT:
£529.39
KENNAMETAL
HERTEL
1-203-0800
MANUAL LATHE CHUCKS; CHUCK TYPE: SELF-CENTERING ; NOMINAL CHUCK SIZE: 8 ; NUMBER OF JAWS: 4 ; MOUNT: PLAIN BACK ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 2.1654 ; BODY MATERIAL: CAST IRON (SEM ...
£499.83
Price with VAT:
£599.79
KENNAMETAL
HERTEL
1-202-0600
MANUAL LATHE CHUCKS; CHUCK TYPE: SELF-CENTERING ; NOMINAL CHUCK SIZE: 6 ; NUMBER OF JAWS: 3 ; MOUNT: PLAIN BACK ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 1.1635 ; BODY MATERIAL: CAST IRON (SEM ...
£496.12
Price with VAT:
£595.34
KENNAMETAL
HERTEL
1-101-0600
MANUAL LATHE CHUCKS; CHUCK TYPE: SELF-CENTERING ; NOMINAL CHUCK SIZE: 6IN ; NUMBER OF JAWS: 3 ; MATERIAL: FORGED STEEL ; MOUNT: PLAIN BACK ; THROUGH-HOLE DIAMETER: 1.6535IN
£491.67
Price with VAT:
£590.00
KENNAMETAL
1288964
33 PIECE, 1/4 TO 3/4" CAPACITY, DA180 DOUBLE ANGLE COLLET SET INCREMENTS OF 1/64"
£470.91
Price with VAT:
£565.09
KENNAMETAL
HERTEL
1-201-0800
MANUAL LATHE CHUCKS; CHUCK TYPE: SELF-CENTERING ; NOMINAL CHUCK SIZE: 8 ; NUMBER OF JAWS: 3 ; MOUNT: PLAIN BACK ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 2.1654 ; BODY MATERIAL: CAST IRON (SEM ...
£470.91
Price with VAT:
£565.09
KENNAMETAL
HERTEL
1-201-1001
MANUAL LATHE CHUCKS; CHUCK TYPE: SELF-CENTERING ; NOMINAL CHUCK SIZE: 10 ; NUMBER OF JAWS: 3 ; MOUNT: FRONT MOUNT PLAIN BACK ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 2.9921 ; BODY MATERIAL: C ...
£451.62
Price with VAT:
£541.95
KENNAMETAL
HERTEL
1-201-1000
MANUAL LATHE CHUCKS; CHUCK TYPE: SELF-CENTERING ; NOMINAL CHUCK SIZE: 10 ; NUMBER OF JAWS: 3 ; MOUNT: PLAIN BACK ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 2.9921 ; BODY MATERIAL: CAST IRON (SE ...
£450.14
Price with VAT:
£540.17
KENNAMETAL
6694046
2MM X 20MM HSK100A TAPER SHANK ER32 COLLET CHUCK 209.9MM OAL, 160MM PROJECTION
£427.15
Price with VAT:
£512.58
KENNAMETAL
HERTEL
1-302-0600
MANUAL LATHE CHUCKS; CHUCK TYPE: INDEPENDENT ; NOMINAL CHUCK SIZE: 6 ; NUMBER OF JAWS: 4 ; MOUNT: PLAIN BACK ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 1.7720 ; BODY MATERIAL: CAST IRON (SEMI-S ...
£415.29
Price with VAT:
£498.34
KENNAMETAL
HERTEL
1-201-0601
MANUAL LATHE CHUCKS; CHUCK TYPE: SELF-CENTERING ; NOMINAL CHUCK SIZE: 6 ; NUMBER OF JAWS: 3 ; MOUNT: FRONT MOUNT PLAIN BACK ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 1.6535 ; BODY MATERIAL: CA ...
£411.58
Price with VAT:
£493.89
KENNAMETAL
HERTEL
1-203-0500
MANUAL LATHE CHUCKS; CHUCK TYPE: SELF-CENTERING ; NOMINAL CHUCK SIZE: 5 ; NUMBER OF JAWS: 4 ; MOUNT: PLAIN BACK ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 1.2598 ; BODY MATERIAL: CAST IRON (SEM ...
£394.52
Price with VAT:
£473.43
KENNAMETAL
6139924
SHELL MILL, MILL4-11, 1.25IN BORE, 8INSERTS, 17600RPM
✓ IN STOCK!
£282.56
Price with VAT:
£339.07
KENNAMETAL
HERTEL
1-202-0801
MANUAL LATHE CHUCKS; CHUCK TYPE: SELF-CENTERING ; NOMINAL CHUCK SIZE: 8 ; NUMBER OF JAWS: 3 ; MOUNT: FRONT MOUNT PLAIN BACK ; THROUGH-HOLE DIAMETER (DECIMAL INCH): .2.1654 ; BODY MATERIAL: C ...
£353.74
Price with VAT:
£424.48
KENNAMETAL
HERTEL
1-202-0500
MANUAL LATHE CHUCKS; CHUCK TYPE: SELF-CENTERING ; NOMINAL CHUCK SIZE: 5 ; NUMBER OF JAWS: 3 ; MOUNT: PLAIN BACK ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 1.2598 ; BODY MATERIAL: CAST IRON (SEM ...
£350.77
Price with VAT:
£420.92
KENNAMETAL
1086426
0.51MM X 10.41MM HSK63 HOLLOW TAPER ER16 COLLET CHUCK 192MM OAL, 160MM PROJECTION, BALANCED TO 15,000 RPM, THROUGH-SPINDLE COOLANT
£348.54
Price with VAT:
£418.25
KENNAMETAL
1086425
0.51MM X 10.41MM HSK63 HOLLOW TAPER ER ER16 COLLET CHUCK 132MM OAL, 100MM PROJECTION, BALANCED TO 15,000 RPM, THROUGH-SPINDLE COOLANT
£348.54
Price with VAT:
£418.25
KENNAMETAL
HERTEL
1-201-0500
MANUAL LATHE CHUCKS; CHUCK TYPE: SELF-CENTERING ; NOMINAL CHUCK SIZE: 5 ; NUMBER OF JAWS: 3 ; MOUNT: PLAIN BACK ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 1.2598 ; BODY MATERIAL: CAST IRON (SEM ...
£347.06
Price with VAT:
£416.47
KENNAMETAL
HERTEL
1-203-0600
MANUAL LATHE CHUCKS; CHUCK TYPE: SELF-CENTERING ; NOMINAL CHUCK SIZE: 6 ; NUMBER OF JAWS: 4 ; MOUNT: PLAIN BACK ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 1.6535 ; BODY MATERIAL: CAST IRON (SEM ...
£336.68
Price with VAT:
£404.01
KENNAMETAL
5998757
1" ID X 1-1/4" OD, 36MM HEAD DIAM, SLOTTED HYDRAULIC CHUCK SLEEVE STEEL, 70MM LENGTH UNDER HEAD, THROUGH COOLANT
£334.45
Price with VAT:
£401.34
KENNAMETAL
HERTEL
1-202-0400
MANUAL LATHE CHUCKS; CHUCK TYPE: SELF-CENTERING ; NOMINAL CHUCK SIZE: 4 ; NUMBER OF JAWS: 3 ; MOUNT: PLAIN BACK ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 0.7874 ; BODY MATERIAL: CAST IRON (SEM ...
£324.07
Price with VAT:
£388.89
KENNAMETAL
1930183
WRENCH FOR INDEXABLE MILLING & TURNING, (MOQ=1, PKG QTY=1)
£309.24
Price with VAT:
£371.09